Export RSS des offres - Seulement les offres à la une : Non / Type de contrat : Interim

2025-40794 - Field Operator M/F

Thu, 09 Jul 2026 11:41:45 Z

Type de contrat : Interim
Description du poste :
Job Purpose Perform safe and efficient operation of onshore oil & gas production facilities. Monitor, control, and operate process equipment in the field to ensure production targets are met while respecting HSE standards and operational procedures. Main Responsibilities- Operate and monitor process equipment in the field (pumps, compressors, separators, heat exchangers, valves). Carry out regular inspections and ensure proper functioning of equipment. Adjust operating conditions as instructed by the Control Room Operator or Supervisor. Report abnormalities, alarms, and equipment failures promptly. Assist in start-up, shutdown, and emergency operations. Take readings and maintain accurate log sheets. Apply and respect HSE rules and participate actively in safety programs. Support maintenance teams during equipment interventions. Supporting the SIMOPS and Field Ops team on site with Field Operations. Providing in a team of 8 B2B field Operators, contribution to the different jobs ongoing onsite, to ensure smooth and continuously improving production. Always ensuring and maintaining safe and streamlined field operations.

Technical diploma or equivalent in Process, Mechanical, Electrical, or related field. Minimum 1–5 years’ experience as Field Operator in oil & gas production facilities. Knowledge of process systems and field operations (pumps, compressors, separators, utilities). Ability to follow instructions and apply operational procedures. Good communication and teamwork skills. Strong commitment to safety and environment protection. Past experience as a Field Operator Experience in control room operations is a preferred. An Iraqi National, with a residency in Basra or nearing areas.
Lieu de travail : Ratawi Oil Field, North Rumaila
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-44003 - Methods Coordination Officer*(M/F) M/F

Tue, 07 Jul 2026 08:41:08 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking for a Methods Coordination Officer to join its work force in Nigeria. Responsibilities are as follows: ACCOUNTABILITIES Manages mass-mailing tool validation team composition and access rights for the division related information dissemination. Supervises the Responsible for relating with Government and relevant agencies as regards payments of Tenement Rates on company’s leased properties, Ground rents and other related services. Administer FM&A Windows Share-Point Services (WSS) or equivalent and other reporting documents storage management software. Responsible for creation of folders/ groups and assigning of access rights at divisional level. Oversees the coordination of the balloting processes of FM&A PHC scrapped materials (household items, vehicles and other equipment) in line with approved procedure. Responsible for weekly KPI, Monthly and yearly sectional reports. Design and maintain standardized reporting templates and dashboards for FM&A. Consolidate and analyse data from Helpdesk (maintenance requests), Technical services (PTS, maintenance teams) and Contracts and administration functions Administer FM systems (e.g., SAP PM, CMMS, SAP FI tools, Primavera, SharePoint). Ensure: Accurate asset data, work orders, and maintenance history. Standardized workflows for maintenance requests System reliability and data governance Lead system optimization and digitalization initiatives. Support the planning and follow-up of FM&A activities and major jobs through systems (e.g., Primavera, SAP). Monitor execution progress and provide variance analysis and insights. Define, track, and report FM&A KPIs (cost, service delivery, maintenance performance). Functions as divisional HSE Entity Representative. Collates and analyses weekly KPIs, identifies areas for improvement and provides related reports. Collates reports and KPI’s from FM&A Helpdesk, PTS and FM&A departments to prepare, edit, update and publish weekly, monthly, half year/ full year reports. Carries out any other duties/projects that may be assigned by the Hierarchy.

Serves as the communication interface of the division hence responsible for information quality, integrity and efficient dispatch. Ensures reporting conforms to company standards for ease of interpretation and subsequent extraction of relevant information and data. Contributes to the organization of record keeping for ISO audits. Enforces the review of work procedures to aid a procedure driven work process. Contributes to the land transport quality operations for safe movement of personnel and items. HSE OBJECTIVES Ensure inclusion company HSE requirements in reporting. Identify and prepare, with user departments, bridging documents to cover HSE reporting gaps Ensure good understanding and adherence to company HSE objectives Report anomalies yearly and attend HSE trainings Qualifications/Experience/Skills Required A university degree. Minimum of 5 - 7 years post NYSC work experience in an industrial environment, preferably an IOC Computer literate: Proficiency in Microsoft Windows professional and Microsoft Office tools/ Primavera and SAP. Mastery of other types of report preparation and editing software is an added advantage. Fluent in English language and possess good communication as well as inter-personal skills. Strong analytical and quantitative skills. Experience in government relations management.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43997 - Planning & Budget Officer*(M/F) M/F

Tue, 07 Jul 2026 07:16:44 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking for Planning & Budget Officer to join its work force in Nigeria. SERVICE DIMENSIONS To coordinate the planning, budget process and performance review of all the departments in the Facilities Management & Administration Division thereby ensuring that planned activities are on schedule, performance is within approved budget and ease of cost recovery for the Company. Follow up FM&A contracts status to ensure contracts are renewed as and when due, without falling into regularisation. Ability to interpret the technical issues into financial figures understandable by all concerned. Ability to manage departments budget expectations, especially in budget cuts and arbitrations. Tasks are usually deadline driven and could be on short notice to meet both corporate and partners’ requirements. Information gathering from various technical personnel cutting across various departments could be daunting. Frequent misunderstanding with the technical persons especially in periods of budget cutting. KPIs for weekly/monthly reports and work programmes from technical departments are compiled, monitored and analysed for GS division. Interface with government agencies and regulatory bodies. Interface between vendors with payment issues and finance department. Readiness to travel at any time for duties relating to the division. Thoroughness in the discharge of duties is very important to eliminate complications on the job and existing work procedures. Budget and Reporting Responsible for receiving from NUIMS yearly, approved and OML130 Projects. Works with Partners & Authorities Relations Division, Finance review yearly financial performance (General Investments Supply Chain Management). Prepares Five years budget plan for FM&A Division (Pluri-annual Actively supports and works with Sectional Heads/Managers of their budgets. Develop, formulate and recommend budget defence strategies FM&A Division. Monitor actual expenditure vs. budget, analyse variances, and recommend corrective actions. Monthly reports of FM&A budget performance in liaison with Responsible on areas to strengthen. Track contract costs, service charges, and vendor spend optimization. Interfacing with Partners and other departments Visits Lagos when necessary to participate in Quarterly Division and NUIMS. Drives Duet meetings. Conducts two nos. weekly meetings to Payment (P2P) meeting with CPNC, Finance and FM&A the internal processes before invoicing/payment. Assists in preparing slides for CC1 / CC2 presentations contracts in FM&A Division. Prepares Weekly/ Monthly report on the progress of key projects to Management in MS Project Application. Works with Internal Control and the Decentralized Buyers in FM&A to ensure that all POs and SPRs processed are in line with the DOA. Performs over-sight functions on the activities of eJPC creators and ensures that FM&A contractors are paid on time.

Planning Coordinate the preparation of annual FM&A budgets (OPEX & CAPEX) aligned with corporate targets and asset requirements. Develop medium- and long-term financial plans, forecasts, and cost scenarios. Prepares on monthly basis FM&A integrated planning schedule and updates and ensures that project activities are properly captured and posted on time. Consolidate inputs from maintenance, real estate, administration, and project teams into a coherent business plan. Prepare and follow up FM&A planning via enterprise tool like Primavera, aligning resources, schedules and operations through integrated planning and forecasting processes. Prepares weekly KPIs for the department and ensures that activities of the former are properly captured for Divisional meetings. Carries out any other duties as may be assigned by hierarchy from time to time. HSE OBJECTIVES Familiarize self with Company emergency procedures, carry out assigned responsibilities safely and report any incident, unsafe act or operation. Participate in all HSE committee meetings and all safety drills. QUALIFICATIONS / EXPERIENCE REQUIRED Good University Degree in Finance, Economics or Engineering discipline At least 5 years post NYSC working experience. Good command of English language. Good interpersonal skills. Knowledge of computer software like MS Office Suit, Ms Project, Primavera, AutoCAD.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2025-40816 - HVAC Technician M/F

Mon, 06 Jul 2026 12:03:30 Z

Type de contrat : Interim
Description du poste :
Support commissioning and start-up activities related to HVAC systems on the onshore oil & gas project. Work with the commissioning team to prepare, test, and hand over HVAC systems safely and on time. Main Responsibilities Assist in commissioning of HVAC systems (including air handling units, chillers, ventilation fans, ductwork, and control systems). Perform functional checks, start-up, and performance testing of HVAC equipment. Support troubleshooting and adjustments during commissioning of HVAC systems. Follow commissioning procedures and instructions from supervisors. Document commissioning activities and test results for HVAC systems. Respect HSE rules and ensure safe working conditions. Support punch list activities and handover of HVAC systems to operations.

Technical diploma or equivalent in Mechanical Engineering, HVAC, or related field. Minimum 3–5 years’ experience in HVAC maintenance or commissioning in oil & gas or industrial projects. Knowledge of HVAC systems, controls, and associated equipment. Ability to read HVAC drawings, P&IDs, and technical documents. Good teamwork and communication skills. Strong commitment to safety.
Lieu de travail : Basra, Artawi Field, AGUP Ph1 Project, Total Energies
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43977 - Mechanical Project Engineer M/F

Sun, 05 Jul 2026 22:24:41 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for Mechanical Project Engineer JOB PURPOSE Roles in this level have responsibility for planning, prioritizing, executing, monitoring, and controlling of Projects in an efficient and systematic manner. They have a prime role, whenever they are assigned the role of project coordinators, in coordinating with team members, multiple trades and stakeholders to ensure smooth-running of projects. They also must work as discipline members in various projects to execute discipline related scope and deliverables. They compile and provide input to the periodic reports, updates to various KPIs and CAPEX within their area of work. They ensure cost control in their assigned projects. KEY ACCOUNTABILITIES Engineering & Project Management Activities: Plan, prioritize, execute, monitor, and control all their assigned projects’ activities in either the role of project coordinator or member required to meet the project objectives with relevant quality, within specified time schedule, scope, cost, design basis & specifications, risks, health, safety, energy, and environment requirements according to Handling of Project procedures, Delegation of Authority, and project execution manual. To ensure necessary communication with project requisitioner, internal & external stakeholders, team members, production, and maintenance representatives for smooth execution of projects. Ensure regular reporting on projects (cost, schedule, cost phasing, forecasting, accruals, KPIs, scorecard variations etc.) and conduct regular review meetings Applications for Engineering Standards: Identify and follow relevant codes & standards, design basis, specifications, engineering procedure, technical requirements, and good engineering practices to execute projects. To work along with Engineering Section to develop and conduct systematic and thorough review of engineering deliverables and support to site execution of project works. Procurement, Contract Co-ordination, and Bid Evaluation: Identify and follow the right Contract execution strategy, identify relevant suppliers to ensure high-quality, cost-effective purchases. Develop all deliverables for the tendering process of equipment and services. Conduct technical evaluations and necessary approvals. Assist in commercial evaluation of bids. Ensure all procedures and governance are compiled to during the tendering and after award till successful completion of all Contracts. Leadership Role:

Bachelor’s Degree in relevant discipline from a recognized University 10+ years of direct and relevant discipline experience in large EPCC projects related to oil/gas, petrochemical, or fertilizer industries. Experience in ammonia and urea fertilizer projects/plants is an advantage. You will possess strong interpersonal and organizational skills, along with a solid level of computer literacy and proficiency in Microsoft Office.
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43976 - Electrical Project Engineer M/F

Sun, 05 Jul 2026 22:24:39 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for Electrical Project Engineer JOB PURPOSE Roles in this level have responsibility for planning, prioritizing, executing, monitoring, and controlling of Projects in an efficient and systematic manner. They have a prime role, whenever they are assigned the role of project coordinators, in coordinating with team members, multiple trades and stakeholders to ensure smooth-running of projects. They also must work as discipline members in various projects to execute discipline related scope and deliverables. They compile and provide input to the periodic reports, updates to various KPIs and CAPEX within their area of work. They ensure cost control in their assigned projects. KEY ACCOUNTABILITIES Engineering & Project Management Activities: Plan, prioritize, execute, monitor, and control all their assigned projects’ activities in either the role of project coordinator or member required to meet the project objectives with relevant quality, within specified time schedule, scope, cost, design basis & specifications, risks, health, safety, energy, and environment requirements according to Handling of Project procedures, Delegation of Authority, and project execution manual. To ensure necessary communication with project requisitioner, internal & external stakeholders, team members, production, and maintenance representatives for smooth execution of projects. Ensure regular reporting on projects (cost, schedule, cost phasing, forecasting, accruals, KPIs, scorecard variations etc.) and conduct regular review meetings Applications for Engineering Standards: Identify and follow relevant codes & standards, design basis, specifications, engineering procedure, technical requirements, and good engineering practices to execute projects. To work along with Engineering Section to develop and conduct systematic and thorough review of engineering deliverables and support to site execution of project works. Procurement, Contract Co-ordination, and Bid Evaluation: Identify and follow the right Contract execution strategy, identify relevant suppliers to ensure high-quality, cost-effective purchases. Develop all deliverables for the tendering process of equipment and services. Conduct technical evaluations and necessary approvals. Assist in commercial evaluation of bids. Ensure all procedures and governance are compiled to during the tendering and after award till successful completion of all Contracts. Leadership Role:

Bachelor’s Degree in relevant discipline from a recognized University 10+ years direct and relevant discipline experience in large EPCC Projects related to oil/gas or petrochemical or fertiliser industry. Experience in Ammonia and Urea Fertilizer Projects/Plants is an advantage. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42904 - COM LEAD ELE / MECHA / I&C / PIPING / PROCESS M/F

Sun, 05 Jul 2026 11:56:25 Z

Type de contrat : Interim
Description du poste :
Role Overview Each Commissioning Discipline Lead is responsible for managing and executing commissioning activities for their respective discipline on site, under the supervision of the Commissioning Site Lead (CSL). Key Responsibilities Lead and supervise discipline-specific commissioning activities on site Manage execution teams (supervisors, technicians). Ensure execution in line with OPERCOM, project procedures, and HSE standards Coordinate with CSL on: Planning and priorities Technical issues and interfaces. Ensure proper system/subsystem completion and handover readiness Support pre-commissioning, commissioning, and start-up phases. Identify and resolve technical issues and constraints. Operate within SIMOPS and brownfield conditions. Report progress, risks, and KPIs Disciplines- I&C Commissioning Lead PVV Commissioning Lead ELE Commissioning Lead MECA Commissioning Lead Process Commissioning Lead

Qualifications & Experience Minimum 10–15 years Oil & Gas experience Proven experience in: Onshore commissioning Brownfield / SIMOPS environments Experience managing site teams
Lieu de travail : Ratawi field
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43907 - Security & Logistics Coordinator *(M/F) M/F

Mon, 29 Jun 2026 22:27:10 Z

Type de contrat : Interim
Description du poste :
SPIE Global Services Energy is looking for Security & Logistics Coordinator to join its workforce in Nigeria. JOB PURPOSE Support the IMA Project in achieving security objectives by providing technical and operational expertise in security operations and administration, facilitate the project operations by ensuring Land transportation of company personnel, partners and other stakeholders. Responsibilities shall include: Advise on security matters across all phases of IMA project development. Coordinate and supervise the project site security team. Conduct security risk and vulnerability assessments; implement security strategies. Contribute to the preparation of Logistics and security budgets / Bills of Quantities (BoQs). Drive innovation and continuous improvement in security practices. Prepare and maintain security documentation; provide up-to-date security guidance to project personnel. Review contractors’ security plans and develop bridging documents for shared responsibilities. Deliver security inductions for personnel and Government Security Forces (GSF). Identify and address international and national security requirements affecting the project. Audit and review company and contractor security activities, equipment, and sites. Follow up on security audit recommendations and facilitate security drills. Ensures provision of land transportation for movement of company personnel and goods from one place to another purposely for the project Ensures all land transportation for the project is operated in conformity with the Company LTMS and HSE/Driving Policy Ensures the daily management of drivers to maintain cordial industrial harmony in the company. Timely preparation of drivers’ monthly HSE meeting in liaison with the FM&A team, safety training, leave schedules and monitor implementation. Oversees the Supply, Installation, Maintenance of IVMS (In-Vehicle Monitoring System) and /or Driving Improvement & Monitoring System (DIMS) and Monthly downloaded IVMS/DIMS report follow up Carries out detailed investigation of road transport incidents in conjunction with relevant FM&A Transport QA/QC Officer, HSE department and keeps records of accidents Prepares activity report on land transport and makes recommendations to the Manager, Travels Management on land transport matters. Liaise with the site security team to plan and execute security exercises.

Ensure compliance with all TotalEnergies Affiliate and Project security policies, with particular attention to the Company Security Management System Monitor and controls transport operations for the project to ensure safety of personnel lives, other road users and goods Constant education and training of project drivers towards safe and defensive driving behaviour as well as accountable for sanctions policy implementation Manages the Supply, Installation and Maintenance of DIMS and/or IVMS for the project fleet.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43849 - Mechanical Supervisor M/F

Mon, 29 Jun 2026 22:25:37 Z

Type de contrat : Interim
Description du poste :
SPIE Global Services Energy is currently looking for a Mechanical Supervisor to join its work force in Angola. Key Responsibilities: HSE Ensures HSE policy fulfillment during his activities Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); Performs the updating of technical documentation; Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, and OSHA); Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out; Participate to safety talk before and after intervention Participates to key procedure audits in proactive manner; Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations Organizes on site the maintenance operations which are placed under his responsibility, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of utilities and equipment placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status.

Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 5 to 10 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ Specific professional knowledge: SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have a proven sense of responsibility
Lieu de travail : DALIA FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-43835 - Static Mechanical Engineer M/F

Mon, 29 Jun 2026 22:25:18 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a Static Mechanical Engineer The Static Mechanical Engineer is responsible for providing high-level technical expertise, design validation, asset integrity management, and engineering support for all static (stationary) equipment and piping systems within the manufacturing facility. This role focuses on maximizing plant reliability, leading execution strategies during major turnarounds, ensuring structural compliance with international design codes, and mitigating risk across high-pressure, corrosive process loops. Key Responsibilities Engineering Design & Modification Review and approve design calculations, data sheets, drawings, and technical specifications for modifications or new procurement of pressure vessels, heat exchangers, and tanks. Generate and review Piping & Instrumentation Diagrams (P&IDs), Piping Material Specifications (PMS), and Material Take-Offs (MTOs) to meet international standards (e.g., ASME, ANSI, API). Develop and review plot plans, equipment layouts and 3D models. Route critical process, utility, and offsite pipelines. Stress Analysis: Perform piping flexibility and stress analysis to ensure systems can withstand high pressures, extreme temperatures, and vibrations. Execute plant modifications via the formal Management of Change (MOC) protocol, ensuring no compromise to process safety or plant design basis. Prepare and approve technical deliverables for replacement projects, including scope of work, technical bid evaluations (TBE), and vendor drawing reviews. Turnaround & Maintenance Support Define the technical scope for critical static equipment during scheduled plant shutdowns, turnarounds, and outages. Develop inspection and repair procedures for specialized high-pressure equipment, including shell-and-tube heat exchangers, reformer tubes, and atmospheric storage tanks. Supervise critical repair activities on-site, ensuring field welding, post-weld heat treatment (PWHT), and non-destructive testing (NDT) comply with structural codes. Asset Integrity & Plant Reliability Support Support Fitness-for-Service (FFS) evaluations and remaining-life assessments for older or degraded stationary equipment Support root cause analysis (RCA) on mechanical static equipment failures, structural leaks, and chronic piping vibrating issues to implement definitive corrective actions.

Bachelor’s degree in mechanical engineering from a recognized, accredited university Minimum 5 years of post-graduate experience in mechanical engineering within a heavy continuous-process chemical plant, petrochemical facility, or refinery environment. Experience in the fertilizer industry (specifically Ammonia, Urea, or Nitrates manufacturing units) is strongly preferred. Proven track record of managing massive capital equipment replacement projects and participating in large-scale plant turnarounds. Language: Must possess excellent fluent English communication skills (both written and verbal) to draft technical engineering reports, lead meetings, and coordinate with international vendors Technical Software & Industrial Codes Software Competency: Advanced proficiency in PV Elite (pressure vessel design), CAESAR II (piping stress analysis) and NozzlePRO. Codes & Standards: Comprehensive working command of ASME Section VIII Div 1 & 2 (Pressure Vessels), ASME B31.3 (Process Piping), API 650/620 (Storage Tanks), and TEMA Standards (Heat Exchangers). Core Competencies Exceptional diagnostic, analytical, and troubleshooting capabilities for complex process plant problems. Clear leadership attributes with experience supervising external multi-disciplinary EPC contractors and vendor engineers.
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43408 - Internal Communication Officer *(M/F) M/F

Mon, 29 Jun 2026 22:17:26 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking for Internal Communication Officer to join its work force in Nigeria. See Job description below SERVICE OBJECTIVE A. Internal Communication Delivery Support the implementation of approved internal communication plans across the organization. Gather, validate, and synthesize information from departments, assets, and functions for internal dissemination. Ensure that all communication outputs align with corporate communication standards, branding guidelines, and local regulatory requirements. Support effective cascading of key messages and corporate priorities across all staff groups and locations. B. Content Creation and Editorial Support Write, edit, and publish high-quality content for internal digital and print platforms including intranet, Viva Engage, OneCom Nigeria, Focus Nigeria, TUPNEWS, Bridgers Magazine, and internal newsletters. Produce a minimum of one hundred (100) internal stories annually. Conduct interviews with managers, functional leads, and employees to support editorial content. Participate in editorial meetings and manage assigned content from initial briefing through drafting, review, approval, and publication. Contribute content to special publications such as Focus Nigeria, Partnership Magazine, and CSR or corporate reports. C. Event Coverage and Reporting Provide internal communication coverage of events including management visits, asset activities, safety campaigns, and community engagements. Produce post-event reports, feature articles, photo stories, and summaries for use across internal communication channels. Support coverage of selected external events where required. D. Leadership Communication Support Assist in the preparation and drafting of speeches, talking points, presentations, and internal messages for leadership as directed. Maintain accurate records, archives, and repositories of approved and validated communication materials. E. Digital and Multimedia Communication Support regular updates and content management on intranet and Viva Engage platforms. Develop basic visual and multimedia communication materials including infographics, photo stories, and campaign assets to support internal communication initiatives. F. Stakeholder Coordination Liaise with departments, assets, and functional teams to source information and confirm accuracy of content prior to publication. Act as a communication liaison to support information flow and collaboration across teams, locations, and hierarchies.

G. Crisis and Sensitive Communication Support Support internal communication during incidents and emergency situations. Apply approved crisis communication protocols with speed, accuracy, discretion, and sensitivity. Ensure strict adherence to instructions and approval processes in high-risk or regulated situations. H. Monitoring, Reporting, and Continuous Improvement Track readership, engagement, and feedback metrics across digital communication platforms.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43315 - Planning & Reporting Engineer* M/F

Mon, 29 Jun 2026 22:16:47 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking for Planning & Reporting Engineer to join its work force in Nigeria. Activities to perform: Build TEPNG Project Management System Propose appropriate work breakdown structure for each project that is appropriate and standardization and consolidation of reporting, streamlining reporting routines. Support the CMS (to be followed by PPM) by identifying all associated planning projects (trackers) & reporting (dashboards), estimation (benchmarks) generic documents, templates, forms standardizing method and improving quality and efficiency, in line with head quarter procedures and guidelines. Support the updating of annual PPM schedule, project L 0 & 1 related to the COMEX file, follow up on the SRA for these files and PR2 /3 and 4 review related to schedule and reporting follows up and simplifies processes between projects and other entities, clarifying responsibilities and involvements. Control the portfolio Manage the Work Time Schedule in relation to the Exhibit C for each package and integrate other services such as drilling and OPS.to consolidate the various project schedules & reports into various key schedule /milestone and manning levels for each activity for the PPM activities. Monitor implementation of the work breakdown structure, Schedule, progress measurement and reporting procedures, using appropriate tools. Developing and maintaining schedules at project level, with analysis of critical path and potential clashes and proposal of remedial actions/solutions. Ensuring availability at all times of an updated and accurate scheduling and progress measurement documentation. Ensuring reporting at Project level (issue of Weekly reports, Monthly Status Report...) Identify high level Risks (overruns, DLDs) and opportunities at portfolio level with mitigation actions. To lead (from planning and reporting point of view) in the preparation / consolidation and review of the various Project schedules and report updates (internal and external / Annual and Multiyear) with inputs from the members of the Project Team and provide “ad hoc” plans support as required. Provide support and resources to projects Propose support and Manage services on behalf of projects when required. Improve and learn from experience Gather and share lesson learned from projects Nigeria regarding project performance including project schedules benchmarks with Onetech. Share regular feedback with local contractors to better work together from one project to another.

QUALIFICATIONS / EXPERIENCE REQUIRED Minimum bachelor’s degree or equivalent in accounting and or similar background. Typically, 20 years of oil and gas industry professional experience of which at least 10 years in an equivalent position as a lead planning, reporting and risk engineer.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43313 - Opercom Commissioning Process/Mechanical Advisor M/F

Thu, 25 Jun 2026 07:31:01 Z

Type de contrat : Interim
Description du poste :
o Provide guidance on process and mechanical commissioning strategy. o Review commissioning sequence of utilities, safety systems, hydrocarbon systems, process packages o Review procedures for process start-up, package commissioning, mechanical preparation o Validate technical content prepared by ITF writers o Validate alignment between start-up logic and commissioning execution o Ensure procedures follow OPERCOM commissioning principles

• Duration: 6 weeks, 5 days/week, 9h/day (including lunch) • Location: Fully Remote
Lieu de travail : Remote
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43816 - Senior Operator - WWTP M/F

Mon, 22 Jun 2026 13:52:30 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Doha for a: Senior Operator WWTP - Male Job Purpose: This position is a unique opportunity with so many advantage in oil and gas career sector in one of the most important Project handled by SPIE in Qatar with QatarEnergy in which the Project is in its 10th year. The Contract consists with a multi discipline tasks in Maintenance and Operation of large Industrial Area with duration of 05 years The candidate starts with general skills like : Written communication, Active listening, Verbal communication, editing. Organization, Time management, Attention to detail, Problem-solving, Computer literacy essential and familiarity with MS Office 2000 packages. To work in SAP system for job planning, work order management, work confirmation, history entry and report preparation The candidate concludes with important abilities including Safe work culture and practices Your main duties will be to:- Supervisory in operating various types of pumps, diesel engines, generators, compressors, blowers, stationary equipment such as piping, valves, waste water treatment plant. He shall ensure the plant isolation procedures, lock-out and tagging procedures and plant permit to work procedures. He shall be supervise all related operation jobs, ensuring plant operation, isolation / de-isolation, waste water plant operation, chemical preparation, etc., system surveillance of potable water, sewage, industrial water and landscaping network, coordinate and handle non routine and emergency works, ensure the operational requirements are met with, compliance with safety and environmental standards, ensuring good house keeping , maintain good safety standards in the maintenance section, conversant with permit to work. The candidate selected for this position shall have ability to understand & communicate in English. Candidates having Gulf experience will be preferred. Candidates shall have good health and sound physique.

Ideally you will have Degre in engineering from a recognized institution with 07 year experience or a diploma engineering with 07 year experience in oil and gas or petrochemical industry or in a similar system I facility. Experience required in water and chemical analysis. Staff selected for this position shall have good spoken in English. Gulf experience shall be added advantage All have experience in operating various types of pumps, diesel engines, generators, compressors, blowers, stationary equipment such as piping, valves, and waste water treatment plant. Preference will be given to candidates with experience in DCS. He shall be familiar with plant isolation procedures, lock-out and tagging procedures and plant permit to work procedures. Preference will be given to candidates with experience in DCS
Lieu de travail : Ras Laffan
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43805 - Lifting & rigging Foreman M/F

Mon, 22 Jun 2026 10:56:09 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Doha for a: Lifting & Rigging Foreman Job Purpose: This position is a unique opportunity with so many advantage in Oil and Gas career sector in one of the most important Project handled by SPIE in Qatar with QatarEnergy in which the Project in its 10th years multi discipline tasks in Maintenance and Operation of large Industrial Area Client satisfaction concluded by a new project contract award with new Positions added. The candidate shall ensure the following: 01. Responsible for supervising, lifting, and rigging operations including planning and scheduling of heavy and critical lifts providing support to maintenance team, 02. Developing and preparing lifting plan for critical and non-critical load transportation and lifting operation, conversant with lifting regulations and lifting practices, 03. Exposure to Diagnoses of faults, carry out routine maintenance, repair and overhaul of various canes and other lifting equipment such as forklift, reach stacker, overhead cranes etc. 04. Exposure to the management of the third-party inspection and certification of the cranes and other lifting equipment. 05. Hands-on experience in working with Work Permit system in Oil & Gas Industry. 06. Preparation of daily Report for the activities. 07. The candidate concludes with important abilities including Safe work culture and practices. 08. Developing and implementing maintenance plans to prevent costly equipment breakdowns. 09. Documenting processes and maintaining service records. 10. Maintaining a tidy work environment and adhering to industry regulations.

Ideally you will have Diploma in Mechanical Engineering or Trade certificate in mechanical engineering, With valid lifting and rigging certification, Minimum of 08 years' experience in inspection, maintenance and operation of the Cranes and other lifting equipment within the Oil and Gas industry or similar facilities. Knowledge in the inspection of the crane wire ropes including the electromagnetic inspection of wire ropes. Familiar with hand tools, fasteners and other similar equipment. You will have good interpersonal and organizational skills, The candidate starts with general skills like repairing and maintaining equipment, running diagnostics, and identifying problems. The candidate concludes with important abilities including documentation and communication. Written communication, Active listening, Verbal communication, editing. Organization, Time management, Attention to detail, Problem-solving, Computer literacy essential and familiarity with MS Office 2000 packages. Good knowledge of English and Mathematics at level required for the duties. Good knowledge in Spoken and written English.
Lieu de travail : Messaieed Industrial City
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43758 - Accounts Payable Specialist (SAP S/4HANA & Ariba) M/F

Wed, 17 Jun 2026 22:25:08 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar, for an Accounts Payable Specialist (SAP S/4HANA & Ariba). Job Description: Review, validate, and process vendor invoices received through SAP Ariba and SAP FI modules in a timely and accurate manner. Verify invoice details against purchase orders, goods receipts, contracts, and supporting documentation. Ensure compliance with company policies, accounting standards, and internal controls. Process non-PO and FI invoices, including appropriate coding and account assignment. Resolve invoice discrepancies by coordinating with vendors, procurement teams, business units, and other stakeholders. Monitor and manage invoice workflow queues to ensure timely approvals and payments. Perform three-way matching (Purchase Order, Goods Receipt, and Invoice) where applicable. Support month-end and year-end closing activities related to accounts payable. Reconcile vendor statements and investigate outstanding items. Assist with internal and external audits by providing required documentation and explanations. Ensure adherence to service-level agreements (SLAs) and key performance indicators (KPIs).

Qualifications: Bachelor’s degree in Accounting, Finance, Business Administration, or a related field. Professional accounting certi􀃞cation (e.g., CPA, ACCA, CMA) is an advantage. Strong understanding of accounts payable processes and accounting principles. Experience working with SAP S/4HANA Finance (FI) and SAP Ariba Invoice Management. Proficiency in Microsoft Excel and other Microsoft Office applications. Strong analytical, problem-solving, and reconciliation skills. Excellent communication and stakeholder management abilities. Ability to work in a fast-paced, deadline-driven environment. High attention to detail and accuracy. Ability to maintain confidentiality and handle sensitive financial information. Minimum Requirements Minimum 3–5 years of experience in Accounts Payable or Finance Operations. Hands-on experience processing invoices in SAP S/4HANA FI and SAP Ariba. Experience handling high-volume invoice processing environments. Knowledge of invoice veri􀃞cation, three-way matching, and vendor reconciliation processes. Familiarity with purchase-to-pay (P2P) and procure-to-pay (P2P) workflows. Experience resolving invoice exceptions and payment-related issues. Understanding of tax requirements, VAT/GST regulations, and invoice compliance requirements (when applicable). Proven ability to meet monthly processing targets and service-level agreements. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43655 - Cost Management Analyst M/F

Tue, 16 Jun 2026 14:22:59 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a cost management analyst. Job Purpose The Cost Management Analyst is responsible for monitoring, analyzing, and managing institutional costs to ensure financial efficiency, compliance with regulatory requirements, and alignment with organisational policies. Act as the focal point for all cost-related matters within FN Responsible for the daily monitoring, tracking and periodic deliverables of the cost management section. Hold regular meetings with the Head of section and finance controlling manager to keep team informed about the progress on the cost management activities. Prepare annual financial cost management plan and model. Develop procedure for cost management function Contribute and coordinate to develop guidelines for cost planning and modelling. Develop seamless process from financial planning to annual cost budget and lead the preparation of Group consolidate budget / parent / subsidiary Cost Budget. Develop a holistic view of historical and forward-looking cost and inventories balances. Coordinate across budgeting, forecasting, and reporting activities and provide consistency review and quality check of the budget contain and reporting. Drive cross-functional alignment on cost objectives, assumptions, and performance expectations across FN stakeholders Provide financial planning, budgeting, and cost reporting to the Management Team (via the financial reporting and budget/forecasting sections) and other stakeholders. Support strategic decision-making through adhoc cost analysis and report as required Interact with other departments / sections in obtaining the necessary inputs for the cost budget preparation. Provide monthly cost analysis against budget, gap to potential and prepare monthly cost reporting Provide and perform inventories trends analysis and monthly KPI’s Conduct monthly cost and inventories review meetings with key internal stakeholders and managers to challenge variances and provide gap analysis. Drive and monitor cash preservation exercise Coordinate internal and external benchmark

Bachelor's degree in a relevant discipline. 3–5 years of relevant professional experience (fertiliser industry is preferred). Minimum of 5 years’ experience working with SAP S4/Hana software . Highly skilled in excel software and Powerpoint Good skills in the power BI tool Good communication and presentation skills You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43738 - Plant inspector M/F

Mon, 15 Jun 2026 22:27:19 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a : Plant Inspector Job Purpose Execute and support inspection activities during EPC and Startup phase until handover to permanent Asset to ensure a safe, efficient and reliable operation of the new facilities by early defect detections in accordance with established policies, procedures, instructions and targets. Key Job Accountabilities 1. Carries out external visual examinations complemented with NDT examination as required on Company equipment such as vessels, boilers, heat exchangers, pressure safety devices, piping, lifting equipment according to Company established policies and procedures and issues inspection reports. 2. Performs preliminary integrity assessment of static equipment and piping according to Company established policies and procedures, interprets findings and issues inspection reports using Meridium or similar software. 3. Inspects maintenance and capital project works being carried out in the field, to ensure that established maintenance practices and procedures are followed for welding, painting, fabrication and installation as per policy and in compliance with relevant applicable international codes and standard. 4. Carries out or supervises NDT tests on mechanical equipment and piping according to the instructions from Supervisor or Corrosion Engineer. Tests include dye penetrant examination, magnetic particle, ultrasonic, hardness tests, eddy current, IRIS, thermography, PMI, Metallography, boroscopy and use of special equipment to determine DFT of paint and ferrometer for stainless steel welding tests and other tests and inspections as required. Follows all required safety procedures while carrying out the work. 5. Initiates inspection recommendation using Meridium and/or via appropriate notification and tracks progress to completion to ensure mitigation of potential risks. 6. Maintains company inspection instruments, tools, and equipment in good and operational condition. Coordinates for planning and procuring of additional instruments as required. 7. Undertakes additional specific inspection related duties as directed by Inspection Engineer/Senior Inspection Engineer to fulfil annual targets and special tasks. 8. Ensures proper maintenance of inspection reports and records. Maintains various records in the computerized systems, updating inspection test results and other data as required. Implements inspection recommendation by notifications raised through SAP and then tracking the progress until completion of work. 9. Coordinates and supervises contractor resources team when required to ensure service compliance with company requirements as well as quality of service provided.

Higher National Diploma (HND) in Engineering Minimum of 8 years’ experience in in-service inspection Knowledge of inspection techniques including UT, MT, PT, RT, and advanced NDT methods Familiarity with relevant international codes, standards, and specifications Certification in API 510 and/or API 570 (API 653 certification preferred, where required) Experience using Meridium or similar data management systems Understanding of Risk-Based Inspection (RBI), corrosion, corrosion control, and damage mechanisms Basic knowledge of plant processes and materials Strong command of the English language, both written and verbal You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Lieu de travail : Raslaffan
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43141 - Wellsite Subsea Engineers M/F

Fri, 12 Jun 2026 22:19:45 Z

Type de contrat : Interim
Description du poste :
Key Activities: - Manage interfaces between subsea equipment suppliers, SPS department and drilling rig during well operations. - Coordinate and witness subsea equipment SIT, offshore testing and installation activities, when required (i.e. Landing String system, IWOCS, etc.). - Assisting Drilling superintendent on subsea BOP troubleshooting - Reviewing and commenting on technical documentation produced by the contractors (e.g. technical reports, specifications, procedures, drawings, etc.) ensuring the implementation of the established procedures and good engineering practice. - Review configuration of subsea Landing String equipment, such as the Subsea Test Tree (SSTT) space-out inside the BOP, lubricator valve positioning, retainer valves functionality, and surface flow tree. - Act as focal point for the rig contractor and completion, well intervention, and subsea equipment suppliers to finalize the rig layout, optimizing onboard equipment positioning and defining any required rig modifications (e.g., control umbilical routing, surface equipment placement, coiled tubing lifting frame installation, Landing String and XT IWOCS umbilical arrangement).- Follow up offshore operations on the drilling rig for landing string operations and well testing - Follow up offshore operations on the drillship for landing string operations and well testing - Solid knowledge of horizontal X-tree system and subsea completion operations, including tubing hanger installation and crown plug installation/retrieval. - Solid knowledge of IWOCS (Intervention Workover Control System), including but not limited of system set up - Solid knowledge of subsea electro-hydraulic (EH) landing string systems and related completion operations. - Solid knowledge of subsea slickline operations Resolving ongoing technical issues concerning all aspects of subsea equipment. - Proven ability to identify and resolve technical and operational issues related to subsea equipment throughout all project phases. HSE Requirements Comply with requirements of Safety, Health and Environmental laws of the Country. Obey the Company Policy on Safety, Health and Environment and aim at achieving the Company's HSE strategic objectives. Practice Company's HSE Management System. Provide safe and healthy conditions of work to subordinate personnel and control over compliance by the personnel with safe, labor protection rules and regulations. Assure the application of all the relevant HSE procedures and standards in organization and development activities. Ensure, supported by the HSE structure, training and staff development on HSE aspects. Ensure that all contractors are competent and fully knowledgeable of Project HSEQ procedures. Prepare the field development strategy, including preliminary contracting strategy and Project HSE Plan. Supervise the preparation of the risk register and the relevant mitigation strategy to address identified uncertainties and managing the risks. Sup

Subsea Engineer with Baker Hughes IWOCS and Horizontal Xmas Tree experience Purpose: Subsea Completion Engineer will be responsible at wellsite for managing interfaces between subsea equipment and drilling rig, ensuring readiness of documentation and equipment, and supporting testing, installation, and commissioning activities during well operations for an ultra-deep water project. In addition, to support the Drilling and Completion & Development team in the engineering, design, manufacturing, testing and installation of subsea production systems focusing on landing string operations, IWOCS system setup, well testing, slickline and subsea completion operations. To assure that the design meets project requirements, applicable standards and engineering best practices. Main Responsibilities: - Responsible for the planning and execution of the subsea landing string /well testing & clean up/ slickline, IWOCS integration and main interface with SPS Department for the Drilling and completion activity for a ultra deepwater project
Lieu de travail : Accra, Takoradi and Offshore Ghana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43702 - Senior QA/QC Inspector – Advance NDT M/F

Thu, 11 Jun 2026 22:27:46 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a : Senior QA/QC Inspector (Advance NDT) Job Purpose To interpret the suitability of products and processes against the designated specification requirements at scheduled and ad-hoc intervals. The role is primarily responsible to report using advance NDT techniques, accurate defect detection, characterization, and supporting a safe and reliable project execution. Key Job Accountabilities Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterisation. Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance. Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities. Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records. Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare and accurate inspection reports with supporting data/images. Engaging contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point. Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented. Ensure NDE traceability of inspected welds and components. Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification. Verify NDT calibration blocks, reference standards, and equipment validity. Ensure that the latest revision of project quality documentation is available, and that records of product and process conformance are maintained in accordance with the document and record control requirements. Prepare a daily report summarising the salient inspection points and quality concerns and coordinate directly with the assigned quality focal point regarding any significant issues identified. Manage and participate in site quality verification activities (i.e. Quality Walkabout and Procurement Surveillance) and document results using the applicable inspection report template. Record and facilitate the follow-up of product related non-conformance results.

Qualifications Bachelor of Engineering - Mechanical / Metallurgy or Equivalent NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum. NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum CSWIP 3.1 certification and NDT Certificate in ECT, preferred Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments). • Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs. • Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures. • Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation. • Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, weld profile, Docusign Envelope ID: D09C6E9D-E1AC-8B3E-82DE-48DA43BB4932 Classification: Confidential coating, cladding, or in -service constraints, and recommend technically suitable inspection approaches. • Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods. • Experience in tube inspection (ECT, IRIS, ACFM), corrosion mapping and inspection of TKY weld joints • Understanding of common weld defects and discontinuities, sour service, calibration techniques and scan plan development. • Familiar with ISO 9001 quality assurance principles and practices. Strong technical background in advanced NDT, welding, fabrication, and code-based acceptance evaluation, with proven QA/QC inspection and coordination experience Fluent in both spoken and written English Strong qualitative and quantitative analytical skills. Advanced computer literacy
Lieu de travail : Raslaffan
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle