Export RSS des offres - Seulement les offres à la une : Non / Pays : Moyen-Orient/Afrique du Nord-->Arabie Saoudite, Moyen-Orient/Afrique du Nord-->Emirats Arabes Unis, Moyen-Orient/Afrique du Nord-->Irak, Moyen-Orient/Afrique du Nord-->Qatar

2026-43390 - CCR Operator M/F

Mon, 20 Jul 2026 08:54:10 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Doha, Qatar for a : CCR Operator Job Purpose: Monitoring and controlling all oil and gas production and utility systems to ensure that production and environmental targets are achieved. Acting as a member of the Offshore Emergency Response Team in the event of an incident to ensure minimal harm to personnel, environment and asset Contributing to the development and review of risk assessments to ensure that hazards have been identified, adequate mitigations are in place and risk has been reduced. Your main duties will be to: Assist the Production Supervisor in safe delivery of core business through active management of production tasks and core operational activities. Act as a Permit Controller to ensure that all works are carried out in accordance with the Permit to Work process and company requirements Provide the Production Supervisor with analysis and comment on production volumes, opportunities and risks in order to improve business performance. Provide visible leadership to personnel to ensure production targets are met and production / rejection volumes are maximized Promote NOC core values by being a safety role model, showing trust, respect and commitment, fostering collaboration across the organization Promote cost consciousness in order to embed a strong cost culture Drive an incident free environment by establishing and maintaining a strong incident free culture Actively participates in and promotes company health and safety campaigns, policies and procedures, that ensures personal safety and that of colleagues at all times Ensure compliance with Operating Procedures and Guidelines to ensure Process Safety, Operational Safety and Plant Integrity.

Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent). Relevant Work Experience: Minimum of 10 years of experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Lieu de travail : Doha
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2025-40184 - Commissioning Supervisor - Process M/F

Thu, 16 Jul 2026 06:35:31 Z

Type de contrat : Durée déterminée
Description du poste :
SPIE Global Service Energy currently hiring for Commissioning Supervisor – Process for Onshore Project in Basra, Iraq. Its a rotational role- 28/28 Job Purpose- Lead and supervise commissioning and start-up activities related to Commissioning Supervisor – Process systems on the onshore oil & gas project. Ensure commissioning tasks are executed safely, efficiently, and in compliance with project requirements. Main Responsibilities- · Supervise commissioning of process systems (separators, pumps, compressors, heat exchangers, utilities). · Plan and coordinate daily commissioning activities with technicians and engineers. · Ensure commissioning procedures and safety rules are strictly followed. · Lead troubleshooting and problem-solving during commissioning. · Validate test results, punch list clearance, and readiness for handover. · Coordinate with construction and operations teams to ensure system readiness. · Report progress and issues to the Commissioning Lead

Requirements- · Iraqi nationals from Basra region. · Engineering degree or technical diploma in Process Engineering or related discipline. · Minimum 5–8 years’ experience in process commissioning, including supervisory roles. · Strong knowledge of process equipment and systems. · Ability to read and interpret P&IDs, datasheets, and commissioning procedures. · Good leadership, communication, and reporting skills. · Strong commitment to HSE practices.
Lieu de travail : Ratawi field
Langue / Niveau :
Anglais : B-Maitrise professionnelle élémentaire

2026-43630 - Senior Category Specialist M/F

Tue, 14 Jul 2026 22:13:39 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Senior Category Specialist Reporting & Context Based within the Commercial Division, Strategic Sourcing department, reporting to the Head of Category. Established March 2025, approved by the Chief Commercial Officer. Job Purpose Support the Head of Category in executing category strategies, lead complex sourcing projects, and manage supplier relationships across assigned categories. Key Accountabilities Strategy & Sourcing: Contribute to category strategy development and execution; lead complex tenders, sourcing events, and negotiations. Supplier & Contract Management: Manage supplier relationships, contract renewals, performance reviews, and resolution of non-conformances. Compliance & Reporting: Enforce QAFCO procurement policies; track and report category KPIs, savings, and supplier performance. Team Development: Mentor Category Specialists and national fresh graduates as part of local talent development initiatives. Innovation & Technology: Drive adoption of AI, automation, and digital tools to optimize category management and decision-making. Stakeholder Engagement: Present category strategies and results to senior management and governance committees. Value Creation: Deliver cost reduction and process optimization aligned with corporate objectives — growth, sustainability, and risk management. IMS Compliance: Adhere to QAFCO Integrated Management Systems (Quality, HSE, Environment, Responsible Care, Energy).

Education & Experience Diploma in Engineering or BSc/BCom from an accredited university. Minimum 5 years' procurement/supply management experience in Oil & Gas or petrochemicals. Professional certification in Supply Chain or Business Administration (CIPS, CPSM or equivalent) is an advantage. Technical Competencies Full command of the procurement cycle (RFQ, bid evaluation, negotiation, PO expediting, closeout). Solid knowledge of Incoterms, commercial/legal contractual terms, logistics, and international trade insurance. Proficiency in SAP S/4 HANA and/or SAP Ariba; comfortable with MS 365 and standard Office tools. In-depth understanding of MRO product specifications with ability to identify alternatives. Awareness of current purchasing policies, market conditions, and best-practice procurement standards. 1. Experience in Capital Projects, Engineering, or Technical Services (including Industrial Gases and Chemicals, Catalysts, and Civil Works) 2. Experience of Qafco or Qatar Energy sister companies 3. Good knowledge to work in a transition from Procurement Operation (tactic) to category management 4. Available to start asap Behavioural Competencies Strong negotiation, analytical, and problem-solving skills with a cost-conscious mindset. Ability to manage conflicting priorities and tight deadlines, including annual plant shutdowns and emergency requirements. Team player with high integrity, effective business English communication, and cross-cultural sensitivity. Results-driven, self-motivated, capable of working with minimal supervision. Committed to HSSE principles and responsible business behaviour.
Lieu de travail : Doha
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43629 - PTW Coordinator M/F

Tue, 14 Jul 2026 22:13:37 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Doha, Qatar for a PTW Coordinator Job Purpose: Act as a Permit Coordinator in the verification of PTW’s and Risk Assessment. Act as an Isolating Authority to ensure that all isolations are designed, implemented and removed. Act as a focal in managing the PTW Visual Management Dashboard. Act as an Operating Authority Representative to verify work is carried out safely. Participate in Daily Permit To Work Meetings, actively involved in the review of hazards and controls. Support the platform in transferring paper PTWs, Risk Assessments and Long Term Isolations to a new electronic system (eVision). Provide visible leadership to personnel to ensure safety targets are met. Promote NOC core values by being a safety role model, showing trust, respect and commitment, fostering collaboration across the organization. Promote cost consciousness in order to embed a strong cost culture. Drive an incident free environment by establishing and maintaining a strong incident free culture. Actively participates in and promotes company health and safety campaigns, policies and procedures, that ensures personal safety and that of colleagues at all times. Ensure compliance with Operating Procedures and Guidelines to ensure Process Safety, Operational Safety and Plant Integrity.

Ideally, you will have graduated with a minimum of a higher secondary school education plus a three-year technical diploma (HNC, HND or equivalent). Relevant Work Experience: A minimum of 10 years of experience, with at least 5 years offshore-level on-field equipment in diversified oil & gas processing or petrochemical plants. You are fluent in English with both written and verbal communication You will have good interpersonal and organisational skills, as well as, a good level of computer literacy, and be proficient in Microsoft Office.
Lieu de travail : Doha, Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2025-40187 - Commissioning Supervisor - Instrumentation & Control System M/F

Mon, 13 Jul 2026 10:52:31 Z

Type de contrat : Durée déterminée
Description du poste :
SPIE Global Service Energy currently hiring for Commissioning Supervisor – Instrumentation & Control System for Onshore Project in Basra, Iraq. Its a rotational role- 28/28 Job Purpose- Lead and supervise commissioning and start-up activities related to Commissioning Supervisor – Instrumentation & Control System systems on the onshore oil & gas project. Ensure commissioning tasks are executed safely, efficiently, and in compliance with project requirements. Main Responsibilities- · Supervise commissioning of instrumentation and control systems (DCS, PLC, transmitters, valves). · Plan and coordinate I&C commissioning activities with the team. · Ensure loop checks, calibration, and functional tests are executed properly. · Lead troubleshooting and technical adjustments for I&C systems. · Validate commissioning results and ensure documentation is completed. · Coordinate with construction and operations teams for smooth handover. · Report progress and technical issues to the Commissioning Manager.

Requirements- · Iraqi national from Basra region. · Engineering degree or technical diploma in Instrumentation, Control Systems, or related discipline. · Minimum 5–8 years’ experience in I&C commissioning in oil & gas industry. · Knowledge of DCS, PLC, transmitters, analyzers, and control valves. · Ability to read and interpret P&IDs, loop diagrams, and control system documents. · Strong leadership and supervisory skills. · Strong commitment to HSE practices.
Lieu de travail : Ratawi field
Langue / Niveau :
Anglais : B-Maitrise professionnelle élémentaire

2025-40794 - Field Operator M/F

Thu, 09 Jul 2026 11:41:45 Z

Type de contrat : Interim
Description du poste :
Job Purpose Perform safe and efficient operation of onshore oil & gas production facilities. Monitor, control, and operate process equipment in the field to ensure production targets are met while respecting HSE standards and operational procedures. Main Responsibilities- Operate and monitor process equipment in the field (pumps, compressors, separators, heat exchangers, valves). Carry out regular inspections and ensure proper functioning of equipment. Adjust operating conditions as instructed by the Control Room Operator or Supervisor. Report abnormalities, alarms, and equipment failures promptly. Assist in start-up, shutdown, and emergency operations. Take readings and maintain accurate log sheets. Apply and respect HSE rules and participate actively in safety programs. Support maintenance teams during equipment interventions. Supporting the SIMOPS and Field Ops team on site with Field Operations. Providing in a team of 8 B2B field Operators, contribution to the different jobs ongoing onsite, to ensure smooth and continuously improving production. Always ensuring and maintaining safe and streamlined field operations.

Technical diploma or equivalent in Process, Mechanical, Electrical, or related field. Minimum 1–5 years’ experience as Field Operator in oil & gas production facilities. Knowledge of process systems and field operations (pumps, compressors, separators, utilities). Ability to follow instructions and apply operational procedures. Good communication and teamwork skills. Strong commitment to safety and environment protection. Past experience as a Field Operator Experience in control room operations is a preferred. An Iraqi National, with a residency in Basra or nearing areas.
Lieu de travail : Ratawi Oil Field, North Rumaila
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2025-40816 - HVAC Technician M/F

Mon, 06 Jul 2026 12:03:30 Z

Type de contrat : Interim
Description du poste :
Support commissioning and start-up activities related to HVAC systems on the onshore oil & gas project. Work with the commissioning team to prepare, test, and hand over HVAC systems safely and on time. Main Responsibilities Assist in commissioning of HVAC systems (including air handling units, chillers, ventilation fans, ductwork, and control systems). Perform functional checks, start-up, and performance testing of HVAC equipment. Support troubleshooting and adjustments during commissioning of HVAC systems. Follow commissioning procedures and instructions from supervisors. Document commissioning activities and test results for HVAC systems. Respect HSE rules and ensure safe working conditions. Support punch list activities and handover of HVAC systems to operations.

Technical diploma or equivalent in Mechanical Engineering, HVAC, or related field. Minimum 3–5 years’ experience in HVAC maintenance or commissioning in oil & gas or industrial projects. Knowledge of HVAC systems, controls, and associated equipment. Ability to read HVAC drawings, P&IDs, and technical documents. Good teamwork and communication skills. Strong commitment to safety.
Lieu de travail : Basra, Artawi Field, AGUP Ph1 Project, Total Energies
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43979 - Commissioning & Startup Lead - SMR H2 plant M/F

Mon, 06 Jul 2026 06:59:00 Z

Type de contrat : Durée déterminée
Description du poste :
• Extensive experience in the commissioning, startup, performance testing, and operational readiness of Steam Methane Reformer (SMR) units in petrochemical and hydrogen production facilities. • Led pre-commissioning and commissioning activities, including mechanical completion verification, system turnover, punch-list management, flushing, cleaning, drying, leak testing, and catalyst loading. • Managed startup activities for reformer furnaces, feed gas systems, steam systems, fuel gas systems, process air systems, syngas production units, and associated utility systems. • Coordinated multidisciplinary teams involving operations, engineering, construction contractors, licensors, and vendors to ensure safe and efficient plant startup. • Developed and reviewed commissioning procedures, startup plans, test packages, operating manuals, and turnover dossiers. • Conducted functional testing of control systems, safety interlocks, ESD systems, burner management systems (BMS), and process control loops. • Supported catalyst reduction, reformer heat-up, steam-out operations, feed introduction, process optimization, and performance guarantee testing. • Ensured compliance with HSE requirements, process safety management standards, and permit-to-work systems throughout commissioning and startup phases. • Participated in troubleshooting process upsets, equipment performance issues, and optimization of hydrogen and syngas production. • Successfully handed over commissioned systems to operations while ensuring achievement of design capacity, reliability, and performance targets.

Education: Bachelor's degree in Engineering Experience: Minimum 10+ years of experience in Oil & Gas industry. Hands on experience in commissioning of SMR H2 plant
Lieu de travail : Jubail, Saudi Arabia
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43977 - Mechanical Project Engineer M/F

Sun, 05 Jul 2026 22:24:41 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for Mechanical Project Engineer JOB PURPOSE Roles in this level have responsibility for planning, prioritizing, executing, monitoring, and controlling of Projects in an efficient and systematic manner. They have a prime role, whenever they are assigned the role of project coordinators, in coordinating with team members, multiple trades and stakeholders to ensure smooth-running of projects. They also must work as discipline members in various projects to execute discipline related scope and deliverables. They compile and provide input to the periodic reports, updates to various KPIs and CAPEX within their area of work. They ensure cost control in their assigned projects. KEY ACCOUNTABILITIES Engineering & Project Management Activities: Plan, prioritize, execute, monitor, and control all their assigned projects’ activities in either the role of project coordinator or member required to meet the project objectives with relevant quality, within specified time schedule, scope, cost, design basis & specifications, risks, health, safety, energy, and environment requirements according to Handling of Project procedures, Delegation of Authority, and project execution manual. To ensure necessary communication with project requisitioner, internal & external stakeholders, team members, production, and maintenance representatives for smooth execution of projects. Ensure regular reporting on projects (cost, schedule, cost phasing, forecasting, accruals, KPIs, scorecard variations etc.) and conduct regular review meetings Applications for Engineering Standards: Identify and follow relevant codes & standards, design basis, specifications, engineering procedure, technical requirements, and good engineering practices to execute projects. To work along with Engineering Section to develop and conduct systematic and thorough review of engineering deliverables and support to site execution of project works. Procurement, Contract Co-ordination, and Bid Evaluation: Identify and follow the right Contract execution strategy, identify relevant suppliers to ensure high-quality, cost-effective purchases. Develop all deliverables for the tendering process of equipment and services. Conduct technical evaluations and necessary approvals. Assist in commercial evaluation of bids. Ensure all procedures and governance are compiled to during the tendering and after award till successful completion of all Contracts. Leadership Role:

Bachelor’s Degree in relevant discipline from a recognized University 10+ years of direct and relevant discipline experience in large EPCC projects related to oil/gas, petrochemical, or fertilizer industries. Experience in ammonia and urea fertilizer projects/plants is an advantage. You will possess strong interpersonal and organizational skills, along with a solid level of computer literacy and proficiency in Microsoft Office.
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43976 - Electrical Project Engineer M/F

Sun, 05 Jul 2026 22:24:39 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for Electrical Project Engineer JOB PURPOSE Roles in this level have responsibility for planning, prioritizing, executing, monitoring, and controlling of Projects in an efficient and systematic manner. They have a prime role, whenever they are assigned the role of project coordinators, in coordinating with team members, multiple trades and stakeholders to ensure smooth-running of projects. They also must work as discipline members in various projects to execute discipline related scope and deliverables. They compile and provide input to the periodic reports, updates to various KPIs and CAPEX within their area of work. They ensure cost control in their assigned projects. KEY ACCOUNTABILITIES Engineering & Project Management Activities: Plan, prioritize, execute, monitor, and control all their assigned projects’ activities in either the role of project coordinator or member required to meet the project objectives with relevant quality, within specified time schedule, scope, cost, design basis & specifications, risks, health, safety, energy, and environment requirements according to Handling of Project procedures, Delegation of Authority, and project execution manual. To ensure necessary communication with project requisitioner, internal & external stakeholders, team members, production, and maintenance representatives for smooth execution of projects. Ensure regular reporting on projects (cost, schedule, cost phasing, forecasting, accruals, KPIs, scorecard variations etc.) and conduct regular review meetings Applications for Engineering Standards: Identify and follow relevant codes & standards, design basis, specifications, engineering procedure, technical requirements, and good engineering practices to execute projects. To work along with Engineering Section to develop and conduct systematic and thorough review of engineering deliverables and support to site execution of project works. Procurement, Contract Co-ordination, and Bid Evaluation: Identify and follow the right Contract execution strategy, identify relevant suppliers to ensure high-quality, cost-effective purchases. Develop all deliverables for the tendering process of equipment and services. Conduct technical evaluations and necessary approvals. Assist in commercial evaluation of bids. Ensure all procedures and governance are compiled to during the tendering and after award till successful completion of all Contracts. Leadership Role:

Bachelor’s Degree in relevant discipline from a recognized University 10+ years direct and relevant discipline experience in large EPCC Projects related to oil/gas or petrochemical or fertiliser industry. Experience in Ammonia and Urea Fertilizer Projects/Plants is an advantage. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42904 - COM LEAD ELE / MECHA / I&C / PIPING / PROCESS M/F

Sun, 05 Jul 2026 11:56:25 Z

Type de contrat : Interim
Description du poste :
Role Overview Each Commissioning Discipline Lead is responsible for managing and executing commissioning activities for their respective discipline on site, under the supervision of the Commissioning Site Lead (CSL). Key Responsibilities Lead and supervise discipline-specific commissioning activities on site Manage execution teams (supervisors, technicians). Ensure execution in line with OPERCOM, project procedures, and HSE standards Coordinate with CSL on: Planning and priorities Technical issues and interfaces. Ensure proper system/subsystem completion and handover readiness Support pre-commissioning, commissioning, and start-up phases. Identify and resolve technical issues and constraints. Operate within SIMOPS and brownfield conditions. Report progress, risks, and KPIs Disciplines- I&C Commissioning Lead PVV Commissioning Lead ELE Commissioning Lead MECA Commissioning Lead Process Commissioning Lead

Qualifications & Experience Minimum 10–15 years Oil & Gas experience Proven experience in: Onshore commissioning Brownfield / SIMOPS environments Experience managing site teams
Lieu de travail : Ratawi field
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43975 - CSU Engineer ASU M/F

Sun, 05 Jul 2026 08:20:12 Z

Type de contrat : Durée déterminée
Description du poste :
A CSU (Commissioning, Startup, and) Engineer for an Air Separation Unit (ASU) is a specialized process engineer. They are responsible for transitioning a newly constructed cryogenic plant from its mechanical completion into full, reliable, and safe commercial operations. Key ResponsibilitiesPre-Commissioning & Commissioning: Inspect and test plant equipment (compressors, expanders, cold boxes, molecular sieves, and distillation columns) to ensure they meet engineering designs and safety standards. Plant Startup: Execute plant purges, pre-cooling, liquefaction, and cryogenic distillation to reach specified product purities (e.g., 99.5% oxygen, nitrogen, and argon).Performance Testing: Conduct operational and turndown tests to ensure the unit achieves designed output, efficiency, and energy consumption guarantees. Troubleshooting: Resolve process bottlenecks, pressure drop issues, temperature anomalies, and equipment vibrations during early operations.Safety & HAZOP Compliance: Enforce strict industrial safety protocols (especially critical for high-pressure pure oxygen systems) and participate in hazard and operability studies. Documentation & Handoff: Write detailed Standard Operating Procedures (SOPs), alarm response plans, and train the permanent operations team.Typical

Requirements Education: Degree in Chemical Engineering, Mechanical Engineering, or process-related discipline. Experience: 15+ years of hands-on operator or engineering experience with industrial gas facilities, specifically focusing on cryogenic ASUs and molecular sieve technologies (TSA). Core Competencies: Deep understanding of thermodynamics, gas compression, cryogenic distillation, and process control systems (DCS/SCADA). Safety Certifications: Relevant local safety credentials (often including Confined Space Entry, Fall Protection, WHMIS/OSHA equivalents)
Lieu de travail : Duba,Neom
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43835 - Static Mechanical Engineer M/F

Mon, 29 Jun 2026 22:25:18 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a Static Mechanical Engineer The Static Mechanical Engineer is responsible for providing high-level technical expertise, design validation, asset integrity management, and engineering support for all static (stationary) equipment and piping systems within the manufacturing facility. This role focuses on maximizing plant reliability, leading execution strategies during major turnarounds, ensuring structural compliance with international design codes, and mitigating risk across high-pressure, corrosive process loops. Key Responsibilities Engineering Design & Modification Review and approve design calculations, data sheets, drawings, and technical specifications for modifications or new procurement of pressure vessels, heat exchangers, and tanks. Generate and review Piping & Instrumentation Diagrams (P&IDs), Piping Material Specifications (PMS), and Material Take-Offs (MTOs) to meet international standards (e.g., ASME, ANSI, API). Develop and review plot plans, equipment layouts and 3D models. Route critical process, utility, and offsite pipelines. Stress Analysis: Perform piping flexibility and stress analysis to ensure systems can withstand high pressures, extreme temperatures, and vibrations. Execute plant modifications via the formal Management of Change (MOC) protocol, ensuring no compromise to process safety or plant design basis. Prepare and approve technical deliverables for replacement projects, including scope of work, technical bid evaluations (TBE), and vendor drawing reviews. Turnaround & Maintenance Support Define the technical scope for critical static equipment during scheduled plant shutdowns, turnarounds, and outages. Develop inspection and repair procedures for specialized high-pressure equipment, including shell-and-tube heat exchangers, reformer tubes, and atmospheric storage tanks. Supervise critical repair activities on-site, ensuring field welding, post-weld heat treatment (PWHT), and non-destructive testing (NDT) comply with structural codes. Asset Integrity & Plant Reliability Support Support Fitness-for-Service (FFS) evaluations and remaining-life assessments for older or degraded stationary equipment Support root cause analysis (RCA) on mechanical static equipment failures, structural leaks, and chronic piping vibrating issues to implement definitive corrective actions.

Bachelor’s degree in mechanical engineering from a recognized, accredited university Minimum 5 years of post-graduate experience in mechanical engineering within a heavy continuous-process chemical plant, petrochemical facility, or refinery environment. Experience in the fertilizer industry (specifically Ammonia, Urea, or Nitrates manufacturing units) is strongly preferred. Proven track record of managing massive capital equipment replacement projects and participating in large-scale plant turnarounds. Language: Must possess excellent fluent English communication skills (both written and verbal) to draft technical engineering reports, lead meetings, and coordinate with international vendors Technical Software & Industrial Codes Software Competency: Advanced proficiency in PV Elite (pressure vessel design), CAESAR II (piping stress analysis) and NozzlePRO. Codes & Standards: Comprehensive working command of ASME Section VIII Div 1 & 2 (Pressure Vessels), ASME B31.3 (Process Piping), API 650/620 (Storage Tanks), and TEMA Standards (Heat Exchangers). Core Competencies Exceptional diagnostic, analytical, and troubleshooting capabilities for complex process plant problems. Clear leadership attributes with experience supervising external multi-disciplinary EPC contractors and vendor engineers.
Lieu de travail : Messaid , Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42236 - Instrument / Analyzer Commissioning Specialist M/F

Mon, 29 Jun 2026 22:24:40 Z

Type de contrat : Durée déterminée
Description du poste :
Basic Functions: The basic function of the Commissioning Instrumentation / Analyzer Specialist is to ensure that all pre-commissioning and commissioning activities for the Instrumentation / Analyzer discipline are prepared and executed according to the OPERCOM® methodology in a safe manner and according to the planned schedule. Main Accountabilities: The main accountabilities include ensuring that HSE is given the highest priority, coordinating and approving the quality and completeness of deliverables, assisting Commissioning Unit leaders in witnessing and monitoring pre-commissioning and commissioning activities, reviewing precommissioning dossiers, and monitoring all Instrument / Analyzer Commissioning activities.

Qualifications: The qualifications for this position include an engineer level or above education, high knowledge of instrumentation / analyzer activities within the Oil and Gas refinery, a minimum of 10 years of experience in a similar position, and specific skills such as knowledge of Management of EPCC contracts and OPERCOM® and ICAPS©. Additionally, the candidate should be methodic, organized, have a good team spirit, and be fluent in English, with Arabic being a plus.
Lieu de travail : Jubail
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43182 - Turnaround Planning Engineer - Electrical & Instrumentation

Mon, 29 Jun 2026 22:15:33 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Turnaround Planning Engineer - Electrical & Instrumentation Turnaround Execution Implement the execution strategy for Turnaround scope, including detailed scheduling, resource optimization, and effective communication among all stakeholders and contractors to ensure timely completion of work. • Coordinate closely with all stakeholders to ensure smooth execution, including alignment on priorities, issue resolution, and recovery actions in case of delays. • Monitor and control Turnaround progress using schedules, performance indicators, and trend analysis to assess deviations and implement corrective measures. • Update and manage schedules to accommodate unforeseen or emergent scope during Turnaround, ensuring all changes are properly evaluated and approved. • Ensure readiness prior to execution by verifying availability of materials, manpower, tools, permits, and other prerequisites. • Support mechanical completion, punch list clearance, and pre-startup readiness verification to facilitate safe and efficient startup. • Facilitate effective communication across all teams for continuous progress tracking, issue resolution, and schedule recovery. • Coordinate the power outage caused by the isolation of the switchboard for shutdown maintenance on busbars. • Evaluate the temporary power supply requirements based on the identified temporary loads and develop the technical specifications required for ordering the same. • Review the temporary power connections to the temporary loads and work with the respective field group on securing the same. • Ensure the quality of short-term contractor manpower hired to support with the shutdown activities. • Monitor the record of attendance for contractor manpower and equipment for the sake of invoicing after the completion of the shutdown. • Raise emergency purchase enquiries for unforeseen requirements emerging during the execution of the shutdown. • Follow on the implementation of the lessons learned from previous shutdown for the sake of continuous improvement. Turnaround scope and plans Develop and define the Turnaround scope, including contract requirements, in line with agreed milestones, and ensure preparation of work packs, personnel mobilization plans, and execution strategies for shutdown and Turnaround windows. • Act as focal point for technical inputs related to tendering, technical evaluations, and contract presentations within the assigned area. • Establish, maintain, and report the master planning schedule across all phases of the Turnaround, including progress monitoring, reporting, and implementation of corrective actions, while controlling scope changes through a structured process. • Initiate and manage all required work orders and activities in SAP systems with realistic duration estimates, ensuring timely availability of resources, materials, and spare

Bachelor’s Degree in a relevant discipline (Instrumentation/Electrical/Electronics). 5–10 years of direct and relevant TAR planning/engineering experience. Proficiency in SAP and Primavera P6 required. Strong understanding of Stage-Gate governance, critical path management, and integrated TAR execution. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Offic
Lieu de travail : Doha
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43313 - Opercom Commissioning Process/Mechanical Advisor M/F

Thu, 25 Jun 2026 07:31:01 Z

Type de contrat : Interim
Description du poste :
o Provide guidance on process and mechanical commissioning strategy. o Review commissioning sequence of utilities, safety systems, hydrocarbon systems, process packages o Review procedures for process start-up, package commissioning, mechanical preparation o Validate technical content prepared by ITF writers o Validate alignment between start-up logic and commissioning execution o Ensure procedures follow OPERCOM commissioning principles

• Duration: 6 weeks, 5 days/week, 9h/day (including lunch) • Location: Fully Remote
Lieu de travail : Remote
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43816 - Senior Operator - WWTP M/F

Mon, 22 Jun 2026 13:52:30 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Doha for a: Senior Operator WWTP - Male Job Purpose: This position is a unique opportunity with so many advantage in oil and gas career sector in one of the most important Project handled by SPIE in Qatar with QatarEnergy in which the Project is in its 10th year. The Contract consists with a multi discipline tasks in Maintenance and Operation of large Industrial Area with duration of 05 years The candidate starts with general skills like : Written communication, Active listening, Verbal communication, editing. Organization, Time management, Attention to detail, Problem-solving, Computer literacy essential and familiarity with MS Office 2000 packages. To work in SAP system for job planning, work order management, work confirmation, history entry and report preparation The candidate concludes with important abilities including Safe work culture and practices Your main duties will be to:- Supervisory in operating various types of pumps, diesel engines, generators, compressors, blowers, stationary equipment such as piping, valves, waste water treatment plant. He shall ensure the plant isolation procedures, lock-out and tagging procedures and plant permit to work procedures. He shall be supervise all related operation jobs, ensuring plant operation, isolation / de-isolation, waste water plant operation, chemical preparation, etc., system surveillance of potable water, sewage, industrial water and landscaping network, coordinate and handle non routine and emergency works, ensure the operational requirements are met with, compliance with safety and environmental standards, ensuring good house keeping , maintain good safety standards in the maintenance section, conversant with permit to work. The candidate selected for this position shall have ability to understand & communicate in English. Candidates having Gulf experience will be preferred. Candidates shall have good health and sound physique.

Ideally you will have Degre in engineering from a recognized institution with 07 year experience or a diploma engineering with 07 year experience in oil and gas or petrochemical industry or in a similar system I facility. Experience required in water and chemical analysis. Staff selected for this position shall have good spoken in English. Gulf experience shall be added advantage All have experience in operating various types of pumps, diesel engines, generators, compressors, blowers, stationary equipment such as piping, valves, and waste water treatment plant. Preference will be given to candidates with experience in DCS. He shall be familiar with plant isolation procedures, lock-out and tagging procedures and plant permit to work procedures. Preference will be given to candidates with experience in DCS
Lieu de travail : Ras Laffan
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43805 - Lifting & rigging Foreman M/F

Mon, 22 Jun 2026 10:56:09 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Doha for a: Lifting & Rigging Foreman Job Purpose: This position is a unique opportunity with so many advantage in Oil and Gas career sector in one of the most important Project handled by SPIE in Qatar with QatarEnergy in which the Project in its 10th years multi discipline tasks in Maintenance and Operation of large Industrial Area Client satisfaction concluded by a new project contract award with new Positions added. The candidate shall ensure the following: 01. Responsible for supervising, lifting, and rigging operations including planning and scheduling of heavy and critical lifts providing support to maintenance team, 02. Developing and preparing lifting plan for critical and non-critical load transportation and lifting operation, conversant with lifting regulations and lifting practices, 03. Exposure to Diagnoses of faults, carry out routine maintenance, repair and overhaul of various canes and other lifting equipment such as forklift, reach stacker, overhead cranes etc. 04. Exposure to the management of the third-party inspection and certification of the cranes and other lifting equipment. 05. Hands-on experience in working with Work Permit system in Oil & Gas Industry. 06. Preparation of daily Report for the activities. 07. The candidate concludes with important abilities including Safe work culture and practices. 08. Developing and implementing maintenance plans to prevent costly equipment breakdowns. 09. Documenting processes and maintaining service records. 10. Maintaining a tidy work environment and adhering to industry regulations.

Ideally you will have Diploma in Mechanical Engineering or Trade certificate in mechanical engineering, With valid lifting and rigging certification, Minimum of 08 years' experience in inspection, maintenance and operation of the Cranes and other lifting equipment within the Oil and Gas industry or similar facilities. Knowledge in the inspection of the crane wire ropes including the electromagnetic inspection of wire ropes. Familiar with hand tools, fasteners and other similar equipment. You will have good interpersonal and organizational skills, The candidate starts with general skills like repairing and maintaining equipment, running diagnostics, and identifying problems. The candidate concludes with important abilities including documentation and communication. Written communication, Active listening, Verbal communication, editing. Organization, Time management, Attention to detail, Problem-solving, Computer literacy essential and familiarity with MS Office 2000 packages. Good knowledge of English and Mathematics at level required for the duties. Good knowledge in Spoken and written English.
Lieu de travail : Messaieed Industrial City
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2025-41493 - Commissioning Specialist/ Commissioning Leader M/F

Mon, 22 Jun 2026 07:24:46 Z

Type de contrat : Durée déterminée
Description du poste :
Commissioning Leader- Wet End (Polyethylene/ HDPE) Commissioning Leader- Dry End (Extruder Experience-Coperion preferred) Commissioning Leader- Boiler (Olefin Experience) Commissioning Specialist- Piping Commissioning Specialist- Rotating equipment Commissioning Specialist- Static equipment Commissioning Specialist- Electrical Commissioning Specialist- Instrument / Analyzer Commissioning Specialist- Heater Commissioning Specialist- HVAC Commissioning Specialist- Process / Process System Commissioning Specialist- Telecom Commissioning Clerk Handover, ICAPS, Punch Commissioning Specialist- Security System Commissioning Coordinator (SIMOPS)

The position requires a high level of knowledge in all types of activities within a petrochemical site, with multi-disciplines specialists needed and over 10 years of experience. Specific skills include a process or operation background, knowledge of EPCC contract management, and high competencies in OPERCOM® and ICAPS© tools.
Lieu de travail : Jubail
Langue / Niveau :
Anglais : A-Aucune maitrise professionnelle

2026-43397 - Training Supervisor M/F

Sat, 20 Jun 2026 22:21:26 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Training Supervisor Purpose Plan, coordinate, and execute organisational learning initiatives end-to-end. Accountable for accurate Training Needs Analysis, sourcing and delivery of quality training solutions, measurement of learning outcomes, and administration of the Learning Management System — all in support of continuous capability development and organisational performance. Key Responsibilities Training Needs Analysis: Collaborate with business leaders and the Capability Development team to identify capability gaps at organisational, departmental, and individual levels. Consolidate findings and prepare the annual TNA and Training Calendar for approval. Training Planning & Sourcing: Identify and evaluate external training providers and programmes for relevance, quality, and value for money. Coordinate vendor registration with Supply Chain and conduct annual vendor evaluations. Training Coordination & Delivery: Communicate training plans to stakeholders; coordinate schedules, venues, facilitators, and participant logistics. Monitor execution against timelines and quality standards. Collaborate with Subject Matter Experts and training partners to develop fit-for-purpose training modules. Evaluation & Effectiveness: Administer pre- and post-training evaluations; collect and analyse participant feedback and learning assessments. Produce evaluation reports with actionable recommendations. LMS & eLearning Administration: Administer and maintain the LMS — upload programmes, manage enrolments, track completions, assign online resources, and resolve system issues. Reporting & Data Management: Maintain comprehensive training records; generate regular and ad-hoc reports on participation, completion, and effectiveness. Provide data-driven insights for workforce planning; support audits and management reviews with accurate training data. Reporting & Interfaces Reports to: Chief Major Projects Officer. Manages: Section Heads, Engineers, Coordinators, Supervisors, Inspectors. Interfaces with: EPCC Contractor, Subcontractors, Procurement, Engineering teams, and client IMS functions.

Education & Experience Bachelor's degree in Human Resources or a related field — mandatory. Professional certification (CIPD, SHRM, or equivalent) — desirable. Certified Trainer qualification — advantageous. Minimum 5 years of relevant experience in a training or L&D function. Proven track record in end-to-end training programme delivery at company-wide scale. Demonstrated experience with LMS platforms and emerging learning technologies. Solid understanding of competency framework development and implementation. Technical Competencies End-to-end Training Needs Analysis and annual calendar planning. Training vendor identification, evaluation, and management. LMS administration (upload, tracking, reporting, user support). Design and delivery of training evaluation frameworks (pre/post assessments, feedback analysis). Data management and reporting; ability to produce insights from training metrics. Familiarity with Client Integrated Management Systems (Quality, HSE, Environment, Energy, Responsible Care). Behavioural Competencies Organised and detail-oriented, with the ability to manage multiple concurrent training programmes. Strong stakeholder communication and coordination skills across business units. Proactive in identifying learning gaps and proposing solutions. Data-driven mindset; comfortable translating training metrics into management-level reporting. Committed to quality standards and continuous improvement.
Lieu de travail : Doha
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle