RSS export of vacancies - Seulement les offres à la une : No / Profil : Facility Management / Maintenance / Entité : SPIE Global Services Energy, SPIE Operations (Siege du Groupe / Group headquarters)

2026-45314 - Field Production Supervisor PDH/PP H/F

Fri, 13 Nov 2026 23:20:12 Z

Contract type : International Contract
Position description :
OPERATION DEVELOPMENT PHASE Develop the PDH/PP site's operations philosophy in line with industry practices and regulations; define objectives, KPIs and reporting. Define operational services, including control room, chemical injection and sampling, and identify subcontracting, resources, tools, storage and laboratory equipment needs. Assess operational risks and define mitigation measures. Estimate the annual operations budget with Maintenance, Inspection, preparation and Procurement teams. Review engineering and design documents to ensure plant operability. OPERATION & MAINTENANCE PHASE Supervise production, meet operational targets and ensure compliance with safety, occupational health, environmental and security requirements. Coordinate Production and Offsite activities, including flare management and water quality control. Inspect operating areas, ensure housekeeping and proper waste disposal, eliminate unsafe conditions and check work permits. Lead daily operations meetings and coordinate supervisors to meet scheduling requirements. Coordinate start-ups and shutdowns according to approved plans and support the Production Supervisor. Stabilize plant conditions during upsets affecting multiple areas; direct response priorities with the Production Supervisor and Senior Operators, focusing on shared process and utility networks and product quality. Authorize urgent chemical supplies outside normal hours and complete the Production Supervisor report. Report production performance to Management and attend safety meetings. Support emergency preparedness and lead immediate responses to unstable conditions with Production, HSEF and Security teams. Authorize high-risk work and emergency maintenance outside normal hours; ensure risk assessments for unusual activities and authorize hot work when required. Contribute to root cause analyses, reliability studies, incident investigations, training and operating procedures. Support the Site Manager and Optimization team on specific studies and other assigned duties. CONTRACT TERMS & MOBILITY Local employment contract within an international group entity or freelance contract, depending on profile. Preparation phase: fully remote, with missions to Cergy (France) and occasional overseas assignments at contract start. Phases 2-3: based in Türkiye on a resident or rotational basis. Eligible expatriate assignments include company support for accommodation, travel, local transportation and meals, in accordance with company policies.

Experience: Minimum of 10 years’ experience as a production superintendent for a petrochemical site, with PDH / PP process. Education: Master’s degree in Chemical, Mechanical, or Process Engineering (or equivalent technical qualification). Advanced certifications in operations management or process safety are advantageous. English: B2 level mandatory. Turkish nationality or speaking people is a strong plus. Strong background in the interpretation of drawings, specifications and production processes, Advanced certifications in operations management or process safety are advantageous. Knowledge in UOP and LyondellBasell process is a plus. Excellent interpersonal skills with the ability to work closely with diverse team members, Good working knowledge of MS Office products. Must work under pressure
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45304 - HSE Manager M/F

Fri, 13 Nov 2026 23:19:57 Z

Contract type : International Contract
Position description :
MISSIONS : Develop and implement the HSE Plan and other O&M HSE deliverables Lead site HSE efforts during routine and non-routine operations Ensure HSE compliance with local laws, international and client standards Define HSE strategies for the entire project and review the design studied from HSE point of view Manage and audit Permit to Work (PTW) system, confined space entry, work at height, hot work, JHA, etc. Conduct and lead incident investigations; report and track corrective actions Perform regular site inspections and HSE management walkabouts Prepare weekly/monthly HSE reports and KPIs for client and management Plan for promote a safety culture across the workforce Carry out occupational health and safety risk assessments Provides technical support to Senior Management on any safety related subjects Oversee Process Hazard Analyses (PHA) conduction Plan for implementation of Management of Change (MOC) system Conduct requirement studies and analyses to prevent fire, explosion, and toxic dispersion, and implement appropriate control measures Prepare and execute the emergency response plan and emergency drills When necessary, establish communication with official institutions such as the municipal fire department and AFAD, or ensure that such communication is carried out Ensure that employees receive HSE training Verify that operational activities are conducted in accordance with Standard Operating Procedures (SOPs) Monitor the Inspection Management system and ensure that inspections of processed equipment are carried out and that maintenance of safety-critical equipment is carried out Ensure that the probability of a major accident is equal to or lower than legally defined thresholds Facilitate audits in accordance with the audit plan Prepare, update, and execute the Emergency Response Plan (ERP) and lead emergency drills and exercises Ensure Health Management System implementation and MEDEVAC set up Build strong communication among Operations, Maintenance, and Contractors, and promote employee engagement in HSE implementation CONTRACT TERMS & MOBILITY Contract type: Local employment contract within an international group entity or freelance contract, depending on profile Working arrangements: Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas

Education : Bachelor’s degree in chemical engineering or HSE Experience : 15 years’ experience in oil and gas industry Fluent in English written and verbal Strong notions (verbal) in Turkish is a plus In-depth knowledge of HSE regulations specific to the oil and gas sector Mandatory technical skills : Internal and external HSE audit training Experience in incident investigation Methods (Root Cause Analysis, TapRooT®, 5-Why). Hazard Identification & Risk Assessment Iso 14001 & 45001 & 18001 Profile description : Good Physical Health Strategic Leadership Decision-Making & Problem Solving Critical Thinking & Analytical Skills Teamwork ability and motivation to foster a strong safety culture Resilience & Stress Management Excellent communication and awareness-raising skills Ability to work independently and manage multiple tasks and deadlines
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45303 - Maintenance Manager H/F

Fri, 13 Nov 2026 23:19:55 Z

Contract type : International Contract
Position description :
Missions: Manage and oversee preventive, corrective, and predictive maintenance programs in coordination with the Maintenance Superintendent. Supervise inspection activities to ensure equipment integrity and regulatory compliance, working closely with the Inspection Superintendent. Interface with the Production Manager and Production Planning Manager to align maintenance schedules with production priorities and minimize operational impact. Coordinate with the Method & Support Manager to improve maintenance strategies, develop work procedures, and support CMMS/data management. Plan and manage major maintenance events, shutdowns, and turnarounds, ensuring scope, resource, and schedule optimization. Ensure timely execution of maintenance and inspection work orders while maintaining high standards of quality and safety. Monitor and report on maintenance KPIs such as equipment availability, MTBF, backlog, and cost performance. Champion risk-based inspection (RBI) and reliability-centered maintenance (RCM) methodologies to improve asset performance. Drive root cause analysis (RCA) for recurring or critical failures and lead implementation of corrective and preventive measures. Manage contracts and interfaces with third-party service providers supporting maintenance and inspection activities. Ensure effective spare parts planning and inventory control in collaboration with warehouse and spare parts coordination teams. Promote a strong HSE culture within the maintenance and inspection teams and ensure compliance with all safety and regulatory standards. Lead and develop the maintenance and inspection workforce through competency building, training, and performance management. CONTRACT TERMS & MOBILITY: Local employment contract within an international group entity or freelance contract, depending on profile Working arrangements: Preparation phase: Full remote with missions in Cergy (France) and abroad at contract start for spot missions overseas Phase 2-3: The position will be based in Türkiye on a resident or rotational basis Eligible expatriate assignments with company support for accommodation, travel, local transportation and meals in accordance with applicable company policies.

Education : Master’s degree or equivalent in Mechanical, Electrical, or Maintenance Engineering. Additional certifications in reliability or maintenance management are a plus. Experience: Minimum of 10 years’ experience as a superintendent for a petrochemical site, with PDH / PP process. Strong understanding of maintenance philosophies, reliability engineering, and asset management principles. Knowledge of SAP tools is a plus. Ability to work collaboratively in a multicultural and cross-functional environment. Good Physical Health. Previous experience in petrochemical plant or refinery is an advantage
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45267 - Method & Support Superintendent H/F

Fri, 13 Nov 2026 23:19:50 Z

Contract type : International Contract
Position description :
The Method & Support Superintendent will have the following responsibilities: • Develop, implement, and continuously improve maintenance engineering methods, procedures, and technical standards. • Support the Maintenance & Inspection Manager in reliability engineering, failure analysis, and standardization of maintenance practices. • Plan and coordinate the scope, resource requirements, and technical documentation for plant turnarounds in collaboration with Production and HSE teams. • Evaluate plant performance data and propose modifications or optimizations to improve reliability, availability, maintainability, and energy efficiency. • Coordinate the technical preparation and execution of plant modifications, upgrades, and debottlenecking projects. • Interface with the Production Planning Manager to align long-term maintenance strategies and plant improvement projects with production targets and schedules. • Collaborate with the HSE Manager to ensure maintenance and modification methods meet safety, environmental, and compliance requirements. • Develop equipment maintenance strategies (e.g., condition-based, time-based, predictive) using CMMS and reliability analysis tools. • Maintain and update maintenance documentation, including equipment datasheets, job plans, BOMs, and technical procedures. • Define standard job packs, maintenance kits, and technical work instructions to ensure safe and efficient execution by field teams. • Provide engineering support during incident investigations, root cause analyses, and risk assessments. • Contribute to contractor selection, technical bid evaluations, and quality control during external support for major overhauls and modifications. • Lead or contribute to digital transformation initiatives in maintenance (e.g., asset management systems, analytics, predictive maintenance). • Build cross-departmental alignment on improvement initiatives and foster a culture of reliability and continuous improvement. CONTRACT TERMS & MOBILITY ⦁ Local employment contract within an international group entity or freelance contract, depending on profile. ⦁ Preparation phase: fully remote, with missions to Cergy (France) and occasional overseas assignments at contract start. ⦁ Phases 2-3: based in Türkiye on a resident or rotational basis. ⦁ Eligible expatriate assignments include company support for accommodation, travel, local transportation and meals, in accordance with company policies.

• Ability to conduct project in efficient and timely manner • Ability to work collaboratively in a multicultural and cross-functional environment • Strong analytical and problem-solving skills to identify issues and develop effective solutions • Excellent interpersonal skills with the ability to work closely with diverse team members • Good Physical Health • Previous experience in petrochemical plant or refinery is an advantage • Capable of giving strong attention to details and problem-solving skills. • Fluent in English written and verbal. • Strong notions (verbal) in Turkish are a plus. Skills: • Strong understanding of complex process plant (PFD, HMB, P&ID, MSDS, datasheet, other technical documents). • Knowledge of international standards and design standards (e.g., API, ASME, ASTM, ISO). • Knowledge of safety standards and regulatory requirements relevant to the chemical industry, ensuring compliance with all applicable laws and regulations. • Knowledge in UOP and LyondellBasell process is a plus. • Familiar with various types of static and rotating equipment (compressors, gas turbine, Diesel engine, separation column, heat exchanger, boiler, etc.). • Proficiency in using industry-specific software and tools for process simulation, project management, and data analysis. • Good working knowledge of MS Office products. • Must work under pressure Education: 10 years’ experience at equivalent position and at least one turnaround experience Experience: Minimum of 10 years’ experience as a superintendent for a petrochemical site, with PDH / PP process.
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45269 - E&I Maintenance Superintendent H/F

Fri, 13 Nov 2026 23:19:47 Z

Contract type : International Contract
Position description :
The E&I Maintenance Superintendent is responsible for the following activities: Maintenance Strategy & Planning • Develop, implement, and continuously improve the E&I maintenance strategy in line with company objectives. • Participate in the preparation and optimization of preventive and predictive maintenance programs. • Ensure proper planning and prioritization of maintenance activities to support production targets. Maintenance Execution • Direct and supervise the execution of all E&I maintenance activities (routine, corrective, and shutdowns). • Ensure maintenance activities are carried out in compliance with procedures, safety rules, and quality standards. • Coordinate with supervisors and teams to ensure efficient use of manpower and resources. Reliability & Performance Improvement • Monitor equipment performance and identify opportunities to improve reliability and availability. • Lead or participate in root cause analysis (RCA) for failures and implement corrective actions. • Propose modifications and technical improvements in the field of E&I to enhance maintainability and reduce maintenance costs. Turnaround & Major Maintenance • Prepare and coordinate turnarounds (TA) and major maintenance activities. • Ensure all activities are executed safely, on time, and within budget. HSE Management • Ensure strict compliance with HSE policies, procedures, and regulations. • Promote a strong safety culture within the maintenance teams. • Ensure proper risk assessment and control measures during maintenance activities. Team Management & Leadership • Lead and manage maintenance supervisors, engineers, technicians, and contractors. • Organize work, allocate resources, and define priorities to meet operational needs. • Support training, coaching, and competency development of maintenance personnel. Coordination & Communication • Ensure effective coordination with Operations, Inspection, HSE, and Support departments. • Review and validate maintenance reports and KPIs (daily, weekly, monthly). • Report maintenance performance, issues, and improvement plans to management. CONTRACT TERMS & MOBILITY ⦁ Local employment contract within an international group entity or freelance contract, depending on profile. ⦁ Preparation phase: fully remote, with missions to Cergy (France) and occasional overseas assignments at contract start. ⦁ Phases 2-3: based in Türkiye on a resident or rotational basis. ⦁ Eligible expatriate assignments include company support for accommodation, travel, local transportation and meals, in accordance with company policies.

• Strong leadership and ability to manage large multidisciplinary maintenance teams. • Excellent organizational and decision-making skills in a high-demand industrial environment. • Strong analytical mindset with focus on reliability and continuous improvement. • Ability to work effectively in a multicultural and multi-interface project environment. • High level of accountability, safety awareness, and result orientation. • Strong communication and stakeholder management skills. • Fluent in English written and verbal. • Strong notions (verbal) in Turkish are a plus. Technical Skills : • Strong knowledge of maintenance philosophies, asset management, and reliability engineering principles. • Solid experience with preventive, predictive, and corrective maintenance programs. • Proficiency in CMMS systems and maintenance planning tools. • Good knowledge of rotating and static equipment (compressors, turbines, pumps, vessels, piping systems). • Familiarity with international standards and best practices (API, ISO, etc.). • Ability to manage and coordinate maintenance teams and contractors. • Strong knowledge of HSE requirements and risk management in maintenance activities. • Experience with root cause analysis (RCA) and continuous improvement methodologies. Experience : • Minimum 10 years of experience in petrochemical or industrial maintenance. • At least 7 years in a similar superintendent or senior maintenance role. • Proven experience in PDH / Polypropylene (PP) plants is strongly preferred. Education: • Bachelor’s degree or equivalent in Mechanical, Electrical, or Maintenance Engineering. • Additional certifications in reliability engineering or maintenance management are an advantage
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45294 - Laboratory Supervisor H/F

Fri, 13 Nov 2026 23:19:45 Z

Contract type : International Contract
Position description :
Lead day-to-day operations of the plant laboratory, including scheduling of tests, supervision of laboratory staff, and resource management. Ensure accurate sampling, testing, and analysis of raw materials, intermediates, final products, utilities, and effluents according to established procedures. Validate and interpret analytical results, ensuring they meet internal and customer quality specifications. Support the production and process teams by providing timely analysis for process adjustments, troubleshooting, and optimization. Ensure all laboratory instruments and equipment are calibrated, maintained, and operated according to quality and safety standards. Develop and update laboratory procedures (SOPs) and quality documentation in alignment with ISO or other applicable standards. Coordinate with the QA/QC, HSE, and Production teams for compliance with product certification, environmental monitoring, and safety testing requirements. Maintain laboratory data management systems and ensure traceability of results and test records. Manage inventory of chemicals, reagents, and consumables, ensuring proper storage, handling, and documentation. Implement and monitor laboratory safety practices, including chemical hygiene, waste disposal, and emergency response readiness. Train and mentor laboratory personnel, ensuring technical competency and adherence to quality standards. Participate in internal and external audits and manage corrective and preventive actions related to lab performance. Support R&D, product trials, and process improvement projects requiring analytical input or validation. CONTRACT TERMS & MOBILITY Local employment contract within an international group entity or freelance contract, depending on profile. Preparation phase: fully remote, with missions to Cergy (France) and occasional overseas assignments at contract start. Phases 2-3: based in Türkiye on a resident or rotational basis. Eligible expatriate assignments include company support for accommodation, travel, local transportation and meals, in accordance with company policies.

Strong verbal and written communication skills to effectively convey information to team members, management, and other stakeholders. Strong organizational skills to manage multiple tasks, prioritize workload, and meet deadlines. Ability to troubleshoot technical issues, identify root causes, and implement corrective actions. Ability to lead and supervise a team of laboratory technicians and analysts, including training, scheduling, and performance evaluation. Good Physical Health. Capable of giving strong attention to details and problem-solving skills. Experience : 7 years of experience in a petrochemical plant or refinery is mandatory. Education: Bachelor's degree in Chemistry, Chemical Engineering or relevant field of education.
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45289 - Marine Chief Engineer M/F

Fri, 13 Nov 2026 23:19:32 Z

Contract type : Fixed-term-contract
Position description :
SPIE Global Services Energy is currently looking for Marine Chief Engineer to join its workforce here in Nigeria on ERHA project. Key Responsibilities: Maintenance and condition monitoring management of following systems/machineries -Sewage system (Fwd. and Aft) Bilge Pumps and Sludge pumps DO Purifier, DO pumps, DO filters Fresh water system in FW hydrophore pumps and hydrophore tan Calorifier system- checks and maintenance Machinery space Fans Routine checks and Planned Maintenance for FRAMO SYSTEM. Danfoss valve remote control system Cargo tank COW machines and PVSVPlan and execute the ordering of spares for designated machinery for forward planning. Oversee daily production operations to ensure efficiency and compliance with safety and environmental regulations. Collaborate with the Marine Engineer to develop and implement marine maintenance strategies and procedures. Monitor and analyze operational performance metrics, identifying areas for improvement. Work closely with other departments, such as Construction and maintenance (crafts FET/MECH/ELE/IN), to ensure seamless collaboration in closing Class Conditions and observations of Maintenance. Plan and prepare for Class and Flag inspections in close coordination with Marine Advisor on shore. Communicate effectively with senior management and other stakeholders regarding operational performance and improvement initiatives. Maintaining the forward and Aft Machinery spaces in clean and safe conditions. Doing weekly/Monthly safety/operational checks for Marine machineries. Planning of jobs for the Marine Engineer on daily basis and review of daily work done Timely acting and planning to improve marine machinery performance in consultation with Maintenance Supervisor and Marine Advisor. Maintain system integrity across cargo tanks, ballast systems, deck piping, and marine equipment ensuring leak-free and safe operation Provide mentorship and coaching to operations team members to enhance their skills and knowledge Develop and implement training programs to ensure continuous professional development. Foster a culture of continuous improvement and operational excellence. Keep self-updated on PSMS, JD and company policies.

Key Competencies and Skills Strong leadership and team-building skills Excellent communication and interpersonal abilities. In-depth knowledge of shipping industry regulations and best practices. Proficiency in marine operations and controls, operational management software and tools. Expertise in work management systems and energy isolation management. Experience in developing and implementing competency frameworks. Able to bring Marine Experience onboard FPSO in order to improve marine systems maintenance and operations. Technical degree for Mechanical/ Marine Engineering 15+ years’ experience in ships operations and maintenance. Class 1 Co with proven track record of marine Chief engineer role with actively leading team. Analytical Thinker: Ability to analyse complex marine operational data and make informed decisions. Problem Solver: Proactive in identifying issues and implementing effective solutions. Mentor: Passionate about developing others and fostering a learning environment. Safety-Conscious: Committed to maintaining a safe and compliant workplace. Key Performance Indicators Team Development Competency Assessments: Conduct regular competency assessments for Marine Motorman and crew. Mentorship Engagement: Must be self-motivated and driving the marine maintenance team to achieve common company goals. Operational Performance Work Management System Utilization: Effectively use the work management system to plan, schedule, and execute marine system/machinery maintenance and operational activities. Energy Isolation Management: Ensure proper implementation of energy isolation procedures during maintenance and shutdown activities. Performance Metrics: Monitor and analyse key machinery metrics, such as breakdown pattern/ rates, equipment efficiency, and maintenance opportunities optimization. Continuous Improvement Improvement Initiatives: Identify and implement continuous improvement initiatives to enhance the marine maintenance and operation processes. Cost Savings: Achieve cost savings through process optimization and waste reduction. Innovation: Encourage and track innovative ideas and solutions from team members and share with Chief Engineer. Key interfaces Overarching alignment Maintenance Supervisor: Daily updates on operational/maintenance performance, safety compliance, and team development. Collaborate on developing and implementing marine maintenance strategies and improvement initiatives. Operations Team Marine Advisor: Regular interaction to collaborate, plan, and support in daily operations and maintenance plans development. Marine Hull Operators: Guidance to ensure smooth and efficient control of production processes and adherence to safety protocols. Follow up Operations to execute all physical isolation/deisolation at the hull deck and machinery spaces, incl
Location : Erha FPSO 28/28
Language / Level :
English : D-Full professional proficiency

2026-42448 - Electrical Maintenance Method Engineer H/F

Fri, 13 Nov 2026 23:04:40 Z

Contract type : International Contract
Position description :
MISSIONS : 1. SAP Data Management & Population Manage asset registers and data templates specifically for electrical equipment and power distribution systems. Populate the CMIMS database with high-quality electrical technical data to ensure robust engineering performance. Define asset data management requirements and participate in the development of electrical maintenance guidelines and strategies. Prepare, follow-up and update the entire process for “Notification – Work Order and Reporting”. Support spare parts responsible for the material creation in CMIMS. 2. Electrical Methods & Reliability Develop and implement electrical maintenance strategies (preventive, predictive, and corrective) to minimize downtime in the PDH-PP plant. Conduct FMEA studies and Root Cause Analysis (RCA) on electrical failures to identify recurring issues and implement lasting solutions. Perform the global maintenance plan, including protective relay testing, motor management, and on-condition monitoring Prepare Maintenance Matrix Plan and Maintenance Work Instruction as part of the Global Maintenance Plan. 3. Engineering & Quality Compliance Produce electrical maintenance deliverables according to project contracts and applicable engineering standards. Proactively highlight any technical engineering deviations, non-conformance, or unacceptable risks to the O&M Package Maintenance Leader. Establish and integrate the technical link between general specifications and spare parts deliverables into the SAP environment Maintain permanent focus on improving maintenance process, updating drawings and P&ID. 4. Team Collaboration & Safety Collaborate with maintenance, operation, HSE and other engineering teams to enhance overall productivity. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract, depending on profile Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas Complete the comprehensive collection and population of all instrumentation and control loop data into the SAP CMIMS by the end of 2026. Produce a global maintenance plan including calibration schedules, RCM-based procedures, and technical manuals for all instrumentation assets by early 2027. Ensure the successful execution of database loading and full CMIMS implementation for the 2027–2033 operational phase.

Bachelor’s degree or higher in Electrical, or related Engineering. English B2 level mandatory Turkish nationality or speaking people is a strong plus Minimum of 3–7 years in maintenance services, with a proven track record in refining, petrochemicals, or PDH-PP processes. Advanced proficiency in SAP/CMMS for asset management and data processing. Strong knowledge of electrical systems, diagnostic tools, and CMMS/SAP data management. Excellent technical reporting and statistical data preparation skills. Ability to work in a multi-cultural environment and under pressure. Effective communication skills for interacting with team members and other departments. Self-motivated with a strong sense of initiative and problem-solving.
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-42449 - Instrumentation Maintenance Method Engineer H/F

Fri, 13 Nov 2026 23:04:37 Z

Contract type : International Contract
Position description :
MISSIONS : 1. SAP Data Management & Population Manage asset registers and data templates specifically for instrumentation, including loops, transmitters, and ESD systems. Populate the CMIMS database with technical instrumentation data to ensure robust engineering performance. Define asset data management requirements and participate in the development of instrumentation maintenance guidelines. Prepare, follow-up and update the entire process for “Notification – Work Order and Reporting”. Support spare parts responsible for the material creation in CMIMS. 2. Instrumentation Methods & Reliability Develop and implement maintenance strategies (preventive, predictive, and corrective) for electronic and pneumatic control systems. Conduct FMEA and Root Cause Analysis (RCA) on instrumentation failures to identify recurring issues and implement lasting solutions. Perform the Global Maintenance Plan, specifically focusing on calibration schedules and on-condition monitoring of critical loops. Prepare Maintenance Matrix Plan and Maintenance Work Instruction as part of the Global Maintenance Plan. 3. Engineering & Quality Compliance Produce engineering deliverables according to project contracts and applicable engineering standards. Proactively highlight technical deviations or non-conformance risks to the O&M Package Maintenance Leader. Integrate technical links between general specifications and spare parts deliverables into the CMIMS. Maintain permanent focus on improving maintenance process, updating drawings and P&ID. 4. Team Collaboration & Safety Collaborate with maintenance, operation, HSE and other engineering teams to enhance overall productivity. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract, depending on profile Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas Complete the collection and population of all instrumentation asset data and control loops into the SAP CMIMS by the end of 2026. Produce a comprehensive maintenance plan including calibration schedules and reliability-centered procedures for all plant instrumentation by early of 2027. Ensure the successful execution of database loading and full CMIMS implementation for the 2027–2033 operational phase.

Bachelor’s degree or higher in Instrumentation, Electrical, or related Engineering. English B2 level mandatory Turkish nationality or speaking people is a strong plus Minimum of 3–7 years in maintenance services, with a proven track record in refining, petrochemicals, or PDH-PP processes. Advanced proficiency in SAP/CMMS for asset management and data processing. Strong knowledge of pneumatic systems, diagnostic tools, and SAP/CMMS. Excellent technical reporting and statistical data preparation skills. Ability to work in a multi-cultural environment and under pressure. Effective communication skills for interacting with team members and other departments. Self-motivated with a strong sense of initiative and problem-solving.
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45194 - Production Superintendent PDH/PP H/F

Thu, 12 Nov 2026 10:15:27 Z

Contract type : International Contract
Position description :
Operations Development Phase Develop and implement the Operations Philosophy for the PDH/PP plant in compliance with industry standards and regulations. Define operational objectives, KPIs, reporting structures, and the scope of operational services. Assess resource requirements, including manpower, subcontracting, equipment, storage facilities, and laboratory needs. Conduct operational risk assessments and implement mitigation measures. Support annual budget preparation with Engineering, Maintenance, Inspection, and Procurement teams. Review engineering and design documents to ensure safe and efficient plant operability. Operations & Maintenance (Normal Production) Oversee daily plant operations to ensure safe, reliable, and efficient production while meeting performance targets. Ensure compliance with HSE, Security, and Occupational Health requirements. Coordinate Production and Offsite activities to maintain environmental compliance. Conduct field inspections to verify safety standards, permit-to-work compliance, housekeeping, and waste management. Lead daily operations meetings and coordinate activities with supervisors and operational teams. Startup, Shutdown & Operational Transitions Coordinate startup, shutdown, commissioning, and other operational transition activities. Support Production Supervisors and lead plant stabilization during process upsets or abnormal operating conditions. Coordinate activities involving shared process and utility systems while ensuring operational continuity and product quality. Authorize urgent operational activities outside normal working hours when required. Safety & Emergency Response Lead emergency response actions and coordinate with Operations, Maintenance, HSE, and Security teams during incidents. Participate in incident investigations and Root Cause Analysis (RCA). Authorize high-risk work, emergency maintenance, hot work permits, and ensure risk assessments for non-routine activities. Reporting & Continuous Improvement Prepare operational and production performance reports for management. Participate in safety meetings and continuous improvement initiatives. Support reliability studies, training activities, operational procedure development, and process optimization projects. · Perform other duties and special assignments as requested by the Site Manager.

Experience: Minimum of 10 years’ experience as a production superintendent for a petrochemical site, with PDH / PP process Education: Master’s degree in Chemical, Mechanical, or Process Engineering (or equivalent technical qualification). Advanced certifications in operations management or process safety are advantageous. English: B2 level mandatory. Turkish nationality or speaking people is a strong plus. Strong background in the interpretation of drawings, specifications and production processes, Advanced certifications in operations management or process safety are advantageous. Knowledge in UOP and LyondellBasell process is a plus. Excellent interpersonal skills with the ability to work closely with diverse team members, Good working knowledge of MS Office products. Must be able to work under pressure
Location : ADANA
Language / Level :
English : D-Full professional proficiency

2026-44999 - Warehouse Supervisor H/F

Sun, 08 Nov 2026 23:15:50 Z

Contract type : International Contract
Position description :
MISSIONS : Warehouse Setup & Optimization: Review the warehouse design and layout (zones for consumables, fast movers, hazardous goods, overall dimensions, access gates, lifting equipment, storage and shelving systems, etc.). Define storage requirements for each item category (climate control, shelving, hazardous material handling, etc.). Implement FIFO/LIFO systems, labelling, and barcode tracking as needed. Ensure accurate spare part codification and classification in the CMMS/ERP and on stored items. Stock Control & Inventory Accuracy: Define, implement, and manage inventory control processes (reorder levels, minimum stock alerts, cycle counts). Use appropriate tools and methods to perform regular stock reconciliations, support annual inventory audits, and ensure 100% data accuracy between physical stock and digital records (CMMS/ERP). Develop and utilize interface tools to provide real-time part availability data to maintenance planners. Ensure systematic calibration period and expiry date are not overdue. Tool Management: Maintain and oversee a centralized tool crib or tool control system for the maintenance teams. Track and manage calibration schedules for precision and safety-critical tools. Logistics & Receiving: Develop and implement procedures for incoming goods inspection and conformity checks against POs and specifications. Coordinate with Procurement and QA/QC for handling non-conformities, damage reports, or vendor returns. Compliance & Safety: Ensure all warehouse operations comply with HSE standards and regulations, especially for hazardous materials. Maintain proper documentation and traceability for safety stock, critical spares, and regulated materials. Workshop Setup and Optimisation: Review the workshop design (layout, equipment, safety zones, utilities). Define workshop requirements (working space, layout, tools, equipment, personnels, lifting means, storage means, waste management). Recommend workshop tools and equipment. Ensure workshop activities comply with company and HSE standards (e.g., permits to work, hot work procedures). Develop and implement procedures for the workshop operation. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract depending on profile Working arrangements : Preparation phase: Full remote with missions in Cergy (France) and abroad at contract start for spot missions overseas Phase 2-3: The position will be based in Türkiye on a resident or rotational basis Eligible expatriate assignments with company support for accommodation, travel, local transportation and meals in accordance with applicable company policies. Expected final project outcome: Complete the design, layout optimization, and equipment procurement for all warehouse and workshop facilities. Establish robust logistics, tool calibration, and preservation procedures to support the 2027–2033 operational phase.

Bachelor's degree or higher in Mechanical, or Maintenance, or a related field Minimum 5 years of experience in warehouse/workshop operations within petrochemical or refinery environments. At least 3 years of experience in warehouse/workshop design, setup, or project-based roles. Strong knowledge of storage/logistics tools and fabrication tools. Proficiency in CMIMS systems for parts management and data analysis. Ensure 100% accuracy between physical inventory and digital records through full spare part codification in SAP. Proven experience in managing and tracking inventory to ensure availability. English B2 level mandatory Turkish nationality or speaking people is a strong plus Strong ability to work in a multi-cultural and multidisciplinary environment. Well-organized, detail-oriented, and able to work under pressure. Excellent interpersonal skills and high adaptability in multicultural environments Ability to produce high-quality technical deliverables and reports.
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-45257 - Maintenance Technician - Instrument/Electrical M/F

Sun, 08 Nov 2026 07:14:11 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Doha, Qatar for a : Instrument/Electrical Technician Job Purpose The instrument/electrical technician is responsible for carrying out preventive, corrective, and breakdown maintenance activities on electrical, instrumentation, and control systems to ensure the safe, reliable, and efficient operation of plant facilities. The role requires the ability to work independently while complying with QatarEnergy safety standards and maintenance procedures. Key Responsibilities Perform preventive, corrective, and emergency maintenance on electrical and instrumentation equipment with minimal supervision. Troubleshoot, repair, test, and maintain electrical systems, instruments, and control equipment. Carry out installation, commissioning, maintenance, and repair of high-voltage (HV) and low-voltage (LV) electrical equipment. Maintain and troubleshoot field instruments, transmitters, analyzers, switches, control valves, and associated control systems. Perform maintenance and fault-finding on Programmable Logic Controller (PLC)-based control systems and related instrumentation. Conduct functional tests, calibrations, and inspections in accordance with maintenance procedures and OEM recommendations. Read and interpret electrical and instrumentation drawings, schematics, loop diagrams, and technical manuals. Ensure all work is executed in compliance with QatarEnergy safety regulations, permit-to-work requirements, and company procedures. Maintain good housekeeping standards in work areas and workshops. Participate in emergency response activities when required and remain physically fit to be part of the Emergency Response Team. Prepare maintenance reports and accurately record completed work activities in the maintenance management system.

Diploma or Technical Certificate in Electrical Engineering, Instrumentation Engineering, Electronics, or a related discipline. Minimum 5 years of experience in electrical and instrumentation maintenance within oil & gas, petrochemical, LNG, refinery, or industrial facilities. Experience working with PLC systems, field instrumentation, electrical motors, switchgear, control panels, and associated equipment. Familiarity with preventive and corrective maintenance practices in operational facilities. Previous experience in offshore facilities is an advantage. Technical Skills Electrical troubleshooting and fault diagnosis. Calibration and maintenance of instrumentation systems. Maintenance of HV/LV electrical equipment. PLC systems maintenance and basic programming knowledge. Reading and interpreting technical drawings and schematics. Knowledge of industrial safety standards and permit-to-work systems. Requirements Ability to communicate effectively in English, both verbally and in writing. Capable of working independently with minimal supervision. Strong commitment to safety and quality standards. Physically fit and medically capable of working in industrial and offshore environments. Ability to understand and implement OEM maintenance and repair procedures. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-44975 - Mechanical Preparator Engineer M/F

Fri, 06 Nov 2026 23:15:12 Z

Contract type : Fixed-term-contract
Position description :
Directly working jointly with the Client . He/She actions and expedites AKPO maintenance Equipment repairs. He/She assists COMPANY in the preparation and execution of detailed maintenance work scopes and its associated planning. He/She checks and ensures that vital equipment on production sites is available as and when required. Provide onshore support and focal point for the Offshore Maintenance teams. Main duties: Prepare scopes of work and ensure that all materials and equipment are available as and when required for modifications, repairs or maintenance activities. Prepare scopes of work for approved work programmes ensuring that all relevant operating procedures and safety regulations are written in and that all necessary materials and equipment are available as and when required. Prepare with COMPANY review and Validation, various calls for bid to contractors invited to tender for work to be carried out. Supervise the execution of modification works at site, or as required by his hierarchy, especially for works executed by external contractors. He ensures that proper COMPANY procedures are followed, and that all modifications are properly documented. Assist with the analysis of equipment malfunctions and makes recommendations for repair and future preventive action. Propose and justify recommendations for the improvement of equipment availability and/or efficiency, and works with other entities in Production Methods to execute desired modifications. Assist with the preparation of the preventive maintenance schedule for plant and equipment and ensures that planned work takes place. Under direction of COMPANY, Follow and analyse on-site spare parts stock levels ensuring they are adequate and maintained, and that materials/equipment received accord with specifications.

Knowledge of TOTAL Process and organization Gas Generators, Gas compressors, Hydraulic systems, Diesel Engines, Broad spectrum of pumps experience (all types), Air compression and General Utilities equipments
Location : OFFSHORE
Language / Level :
English : E-Native or bilingual proficiency

2026-44717 - Technician Planning - Call Off

Thu, 05 Nov 2026 13:04:58 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Servies Energy Doha for a: Technician Planning - Call Off Job Purpose: This position is a unique opportunity with so many advantage in Oil and Gas career sector in one of the most important Project handled by SPIE in Qatar with QatarEnergy in which the Project in its 11th year with multi discipline tasks in Maintenance and Operation of large Industrial Area Client satisfaction concluded by awarding a new 05 years contract of the Project with new Positions added The candidate shall be responsible for planning and scheduling of maintenance works, work order status review and monitoring, report preparation, Working on established computerize planning and scheduling tools such as SAP, Microsoft project, maintenance management software. To work in SAP system for job planning, work order management, work confirmation, history entry, report preparation in SAP (CMMS).

Ideally you will have 03 years diploma from a recognized institution and SAP PM Module knowledge and experience Proven knowledge of maintenance planning and contract administration. Read and interpret manuals and drawings. Knowledge on Key Performance Indicators and maintenance strategies, Preventive maintenance Plans and optimization. Computer literature in appropriate software. Written communication, Active listening, Verbal communication, editing. Organization, Time management, Attention to detail, Problem-solving, MS Office 2000 packages. The candidate shall have experience in oil and gas industry or petrochemical industry or with major utilities. The candidate concludes with important abilities including Safe work culture and practices.
Location : Ras Laffan Industrial City
Language / Level :
English : D-Full professional proficiency

2026-45151 - PV Technician M/F

Wed, 28 Oct 2026 23:20:50 Z

Contract type : Temporary work contract
Position description :
SPIE Global Services Energy is seeking an experienced PV Technician to support the operation and maintenance of large-scale Solar Power Plants. The ideal candidate will have hands-on experience in photovoltaic (PV) systems, electrical equipment maintenance, troubleshooting, and high-voltage switching operations. Key Responsibilities Perform preventive, corrective, and breakdown maintenance on PV plant equipment. Carry out inspection, testing, and maintenance of transformers, switchgear, and protection relays. Maintain and troubleshoot MV/LV motors, vacuum circuit breakers, and electrical distribution systems. Conduct MV and HV cable jointing, termination, repair, and testing activities. Support operation and maintenance activities for substations up to 33kV and associated electrical systems. Monitor and maintain UPS systems, thyristor rectifiers, and plant electrical utilities. Perform switching and isolation activities on electrical systems in accordance with safety procedures. Diagnose and rectify faults using PLC-based systems and Human Machine Interfaces (HMI). Support maintenance activities related to HVAC and instrumentation systems. Ensure compliance with HSE requirements, site procedures, and electrical safety standards. Prepare maintenance reports and update records using computerized maintenance systems.

Diploma or Technical Certificate in Electrical Engineering or a related discipline. Minimum 5 years' experience in the operation and maintenance of Solar Power Plants (100 MWp and above). Strong experience in: Numerical relay protection systems. Transformer maintenance. MV/HV cable jointing and repairs. Vacuum circuit breaker maintenance. MV/LV motor operation and maintenance. Electrical systems and substations up to 33kV. UPS systems and thyristor rectifiers. Experience with PLCs, HVAC systems, instrumentation, and HMI applications is preferred. Experience in switching and operation of electrical systems at: 1500V DC 33kV 220kV Good computer skills and proficiency in Microsoft Office applications. Strong troubleshooting and fault-finding abilities. Good communication skills and ability to work in a multicultural environment. Preferred Experience Experience in utility-scale solar power plants. High-voltage switching authorization or certification. Familiarity with CMMS/SAP maintenance system You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Location : Messaieed Industrial City
Language / Level :
English : D-Full professional proficiency

2026-45121 - Rotating Mechanical Engineer M/F

Fri, 23 Oct 2026 07:05:03 Z

Contract type : International Contract
Position description :
HSE Proposition of any modification to improve HSE parameters. Contribution to the reporting of anomalies and incidents and participation in diagnosis and corrective actions. 2. Supervision and Training Preparation of a training program for the trainees engineers in the frame of the identified needs and in accordance with recognized methods and strategies. Training based on Job examples and directly in contact with the maintenance of the FPSO. Evaluation of the trainees performances in Mechanics. 3. Mechanical Tasks Control of the maintenance plan of installed equipment for mechanical trade. Contribution in the daily reporting of the mechanical activities (including Performance Indicators). Apply of the maintenance plan as defined by the COMPANY Maintenance Leader. Analysis, trouble shoot and reporting after main failures or dysfunctioning of equipment. Organisation and management of relevant actions plan. Follow up of site activities relative to Vendors, Suppliers or Specialists venues, especially in term of preparation and management of the works. Validation for mechanical activities of the works carried out by subcontractors before FPSO expediting. Documentation follow-ups in the SERVICE trade. 4. Contractor Supervision Evaluation of the competency and the performances of the contractors in Mechanical activities. Audit of or contractors as necessary based on the KPIs. Supervision of the management of spare parts for mechanical equipment according to pre defined strategy. Supervision of the preparation of the scheduled overhaul/upgrade. Verification of the strict follow up of the maintenance strategy approved. 5. Optimisation and Development Proposition of improvement in mechanical maintenance strategy based on Site requests and needs. Contribution in his technical area to the integration of the future Block 17 developments. Participation to audits. 6. Management Provide relevant REX to the Mechanical trade (head office). Contribution to the integration of future DB17 development. Reporting of Mechanical activities. Resident or 8*3 rotation

Key requirements: Mechanical maintenance: Good knowledge of mechanical equipment and preventive and corrective maintenance strategies. Maintenance methods and planning: Ability to develop, implement, and optimize maintenance plans and prepare major overhauls. Failure analysis: Ability to troubleshoot equipment failures, identify root causes, and implement corrective actions. Contractor supervision: Experience supervising subcontractors, vendors, and specialist interventions. Spare parts management: Ability to monitor spare parts and ensure their availability for maintenance activities. Continuous improvement: Ability to propose improvements to maintenance strategies and participate in technical audits. Reporting: Experience monitoring KPIs, preparing activity reports, and sharing lessons learned (REX).
Location : Luanda (Angola) B17
Language / Level :
English : D-Full professional proficiency

2026-44546 - Lab Technician M/F

Wed, 21 Oct 2026 06:52:46 Z

Contract type : Temporary work contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC - SPC for a: Lab Technician Job Purpose: The Laboratory Technician is responsible for the safe, accurate, and timely execution of routine and non-routine analytical tests on refinery process streams, finished products, and raw materials. Operating under direct supervision, the technician follows standardized procedures to generate high-quality data that is critical for process control, product quality certification, and environmental compliance. Your main duties will be to: • Pick samples from designated plant sample points as assigned, following all safe work practices and permit procedures. • Receive, log, and properly label samples in the laboratory logbook upon receipt. • Prepare samples for analysis, which may include filtration, dilution, homogenization, or derivatization. • Prepare standard solutions, reagents, and mobile phases as directed by SOPs. • Label all solutions with contents, concentration, preparation date, expiration date, and preparer's initials • Adhere to all quality control procedures outlined in the laboratory's QMS. • Adhere to all laboratory safety protocols and HSE policies without exception. • Operate a wide range of authorized laboratory instruments. • Perform routine and non-routine analytical tests on a variety of samples including crude oil, intermediate process streams, fuels (gasoline, diesel, jet fuel), gases, amine solutions, water, wastewater etc. • Execute tests strictly in accordance with approved Standard Operating Procedures (SOPs) and international standard methods (e.g., ASTM, UOP, ISO, Shell SMS). • Accurately and legibly record all raw data, observations, and calculations in laboratory notebooks and worksheets. • Perform basic calculations and data transformations as required by the test method. • Report any instrument malfunction or performance drift immediately to the Lab Engineer. • Report all unsafe conditions, near misses, and incidents immediately to the Lab Engineer / Lead Lab Engineer. • Participate in safety meetings, toolbox talks, and emergency drills. • Handle all chemicals and hazardous waste according to established safety procedures. • Perform any other duties as assigned by the Lab Engineer or Lead Lab Engineer. Rotation: 10 weeks on / 2 weeks off

Ideally, you will have a Degree in Chemical engineering discipline from a recognized university with 4 years' experience in Oil & Gas (incl. but not limited to Refinery)/ Petrochemical fields or Equivalent” or “2 years in a relevant position title”. You will have proven experience in Safety precautions and occupational hazards in the use of equipment; safe work methods and practices. You will have a good level of computer literacy and be proficient in industry commissioning software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.
Location : Basra, Iraq
Language / Level :
English : C-Professional working proficiency

2026-44545 - Laboratory Engineer M/F

Wed, 21 Oct 2026 06:50:11 Z

Contract type : Temporary work contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC - SPC for a: Laboratory Engineer Job Purpose: Manage all activities including safety and environmental compliance in Laboratory. Your main duties will be to: 1. Manage and monitor all the laboratory equipment / Utilities/ Spare parts / Consumables in Laboratory. 2. Manage and monitor all activities held in laboratory. 3. Supervise Laboratory Operators. Maintain good working spirit and coordinate and motivate laboratory staffs. 4. Coordinate with Commissioning team for sampling timing and quantity of media for analysis. 5. Check the analysis result and prepare analysis report / Responsible for review & approval for analysis report by laboratory operators. 6. Maintain stable operation of laboratory equipment. Manage troubleshooting, stock of consumables, spare parts, utilities and maintenance tools. 7. Communicate and coordinate with Commissioning team, Engineering team, Laboratory equipment supplier and others as necessary to accomplish operation and maintenance of laboratory equipment and building. 8. Follow, implement, and maintain HSE requirements, Environmental procedure, Hazardous waste management procedure; monitor and control HSE performance of laboratory staffs. Rotation: 10 weeks on / 2 weeks off

Ideally, you will have a Degree in Chemical engineering discipline from a recognized university with 7 years' experience in Oil & Gas (incl. but not limited to Refinery)/ Petrochemical fields or Equivalent” or “3 years in a relevant position title”. Preferable have experience working on Shimadzu instruments. You will have proven experience in Safety precautions and occupational hazards in the use of equipment; safe work methods and practices. You will have a good level of computer literacy and be proficient in industry commissioning software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.
Location : Basra, Iraq
Language / Level :
English : C-Professional working proficiency

2026-44866 - Project Control Engineer M/F M/F

Sun, 18 Oct 2026 22:15:31 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Project Control Engineer JOB PURPOSE The Project Control Engineer supports the Senior Project Control Engineer in planning, monitoring, and controlling Project cost, schedule, and progress performance across Major Projects, ensuring alignment with contractual obligations, Project objectives, and Company standards. The role assists in analyzing Project schedules, forecasts, and progress reports, enabling accurate tracking of Project performance and supporting informed decision-making. In addition, the role-holder is responsible for promoting, adhering to, and ensuring compliance with QAFCO’s Occupational Health & Safety, Environmental, Energy, and Quality management systems and standards, while coordinating effectively with other Project Team members to ensure successful Project delivery. KEY ACCOUNTABILITIES Management Systems · Awareness of QAFCO Integrated Management Systems (Quality; Environment; Occupational Health & Safety; Responsible Care; & Energy Management Systems and IFA Product Stewardship) · Comply with all the relevant policies and procedures of QAFCO Integrated Management Systems Ensure that QAFCO and Project HSEQ requirements take the highest priority and actively implemented in Project day-to- day activities. Project Planning & Scheduling Ensure that the Contractor develops and maintains Project schedules covering engineering, procurement, construction, commissioning, and handover phases in full compliance with EPCC Contract requirements. Oversee EPCC Contractor’s performance of critical path analysis, float management, and schedule optimization to ensure timely delivery of project milestones. Coordinate with discipline leads and contractors to ensure alignment of detailed schedules with the overall project timeline. Lead the development of baseline schedules, including resource loading. Monitor progress against baseline and forecast schedules, identifying delays and recommending recovery plans. Implement and manage planning tools and ensure consistent use across all stakeholders. Progress Monitoring & Reporting Track and report physical progress, earned value, and schedule performance. Prepare and present weekly/monthly progress reports, dashboards, and executive summaries for senior management and stakeholders. Coordinate with contractors to review and validate monthly progress reports and updates. Support the preparation of Steering Committee presentations, highlighting key risks, achievements, and deviations. Maintain accurate and auditable records of planning data, progress curves, and performance trends. Cost & Resource Planning Ensure EPCC Contractor develops resource histograms, manpower plans, and productivity tracking. Assist in forecasting cost impacts of schedule changes and delays. Provide input for budget planning, cash flow projections, and cost control

Bachelor’s degree in Engineering (Mechanical, Chemical, or related discipline). Professional certification in project management or controls (e.g., PMP, CCP) is preferred. Minimum 10 years of experience in project controls within major projects, preferably in fertilizer or petrochemical plants. Proven expertise in planning and coordinating integrated activities for onshore field equipment. At least 3–5 years of experience on large-scale projects (EPCC or similar). Skills & Competencies: Fluency in English (written and spoken). Strong interpersonal and organizational skills. Advanced computer literacy and proficiency in Microsoft Office Suite. Familiarity with project control software (e.g., Primavera P6, MS Project) is an advantage.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-42133 - MAINTENANCE PLANNING ENGINEER MECHANICAL M/F

Fri, 16 Oct 2026 22:05:15 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : MAINTENANCE PLANNING ENGINEER MECHANICAL - Prime responsibility for carrying out the planning of daily maintenance activities with primary responsibility to ensure ‘right-first-time’ job performance so that equipment reliability is maximized, while improving maintenance ‘tool time’ ,’work quality’ by anticipating and eliminating potential delays through planning and coordination of labor and non-labor resources including materials and services. - The role is expected to be able to remove uncertainty to execute planning in a systematic, efficient and economical way with forecasted maintenance job planning approach. - He or she should be able to independently develop cost and time estimates of planned maintenance work to meet budgets and schedules. - Planning Engineer shall have Competency and work experience in SAP Maintenance module, preferably in SAP S4-HANA including order planning, Purchase requisition, service entry sheets, call-off orders, service orders, Maintenance related Master data creation, updation, deletion etc. Routine maintenance job planning - Establish, maintain and improve the Maintenance Plans within the area of responsibility - Develop equipment preventive maintenance schedule. - Based on the daily new work request from production, Planning engineer shall prepare detailed activity break up along with the estimation of required resources for the job i.e. internal and external manpower, materials and services. - Preparing work pack for each work order. - Coordinate and review the work plan for assigned maintenance activities; review and evaluate planned work, methods , procedures and oversee spare parts inventory. Contract Handling - Participate in maintenance contracts handling including scope development, specifications, initiating procurement process, technical evaluation and provide support to superiors for management approval process as and when required. - Day to day coordination with contractors to supply manpower and/or services based on requirement during daily work order planning. - Verify and process the invoices submitted by the contractor. Spares and Materials management - Communicate and Co-ordinate with end-users to ensure spares and materials are made available by Planning Engineers for schedule activities. Also provide feedback to MRP so that cost-effective replenishment levels are maintained. - Updating the item master including item specifications, Bill of Material, Spare Parts Criticality and new item codes in ERP as and when required. - Responsible for the Periodic Inventory review & Changes in the buffer stock levels with the coordination of end-users. - Co-ordinate with Supply Chain department and Contractors for procurement of spares to ensure the availability.

Bachelor’s Engineering degree (12+4 years) in (Mechanical ) 10 years relevant experience in Oil & Gas/Petrochemical/Fertilizer industry and competency* Hands-on experience of the Work order part of EAM (enterprise asset maintenance) module of SAP would be preferable. Competency and work experience in ERP – SAP, preferably in SAP S4-HANA including Competency and work experience in Maintenance related Master data creation, master data updating, master data deletion etc in SAP. 1. Strong technical background and maintenance field experience. 2. Experience in daily maintenance planning. 3. SAP ( Master data- Establishment PM plans, creation of equipment, Functional location, BOM, Material Catalogue). 4. Experience in technical evaluation and spare parts management. 5. Experience in contract establishment. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : Mesaid
Language / Level :
English : C-Professional working proficiency