RSS export of vacancies - Seulement les offres à la une : No / Profil : Commissionning / Mise en service, Installation & montage / Entité : SPIE Global Services Energy

2026-44353 - INSTRUMENT & PLC SUPERVISOR M/F

Thu, 06 Aug 2026 22:19:18 Z

Contract type : Permanent contract
Position description :
SPIE Global Services Energy is currently looking for Instrument & PLC Supervisor to join its work force in Nigeria. Key Responsibility: Responsible for assuring from Validation by COMPANY ICSS Engineer the accurate control, authorization verification, integrity and follow-up of all software and hardware for use in the ICSS and systems at the Power Generation Plant Guarantees a good level of availability of the equipment on site Performs the diagnostics and trouble shooting in the ICSS and PLC, Follows-up the parameter values and alarms in the concerned systems, for condition monitoring purpose, Carries out, at the CSR request, any intervention within his field of competence. Organises on site, the maintenance operations which are placed under his responsibility, Ensures that the COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during preparation and performance of maintenance operations placed under his responsibility, Manages interventions using the CMIMS SAP R3, Enters intervention reports on CMIMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of utilities and equipment placed under his responsibility, Takes part in daily, weekly and coordination meetings on site, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manages the team of technicians directly under his responsibility,

Technical Engineer / Higher National Diploma (HND) or equivalent in Mechanical / Electrical / Instrumentation Engineering with a minimum of 5 to 10 years’ experience in the operation and maintenance of Gas Turbines and auxiliaries in oil and gas production installations or power generation plant A thorough, demonstrated understanding of plant operations, strong understanding of Gas Turbine and axial compressor, DCS, ESD, F&G, Field Bus, Field instrumentations, PLC, Bentley Nevada and online condition monitoring system, Mechanics, Hydraulics, Electricity and Electronics. Understanding SAP/R3 PM modules as relate to Notification, work orders, PM’s, and spare parts inventories. Experience in Troubleshooting, Root Cause Analysis, Health Checks, monitoring, PM and Corrective Maintenance. Competent computer skills, especially Microsoft Office products; Excel, and Word. Solid knowledge of plant engineering and plant maintenance functions and how they relate to operations. Strong oral and written communication skills in English Language. Ability to comprehend and apply technical information, including mechanical and electrical drawings (such as blueprints, P&IDs, single-line diagrams and schematics) to problem-solving situations and trouble-shooting. Ability to communicate and coordinate work on technical subjects with others across job families and with outside vendors. Must have proven ability as a leader of small team. Perfectly competent and independent in his field, he must show common sense and organizational ability.
Location : Port Harcourt
Language / Level :
English : C-Professional working proficiency

2026-42201 - Commissioning Leader- Utilities

Wed, 05 Aug 2026 07:23:13 Z

Contract type : Fixed-term-contract
Position description :
Basic Functions: The primary role of the Commissioning Site Leader is to ensure that the CONTRACTOR's scope of services for pre-commissioning and commissioning preparation is carried out in compliance with Contract and schedule obligations, and in line with SATORP specifications. The position also involves ensuring the safe and smooth execution of all commissioning activities, following the OPERCOM® methodology and the proper use of ICAPS© software. Main Accountabilities: The Commissioning Site Leader is responsible for supporting the review and approval of the CONTRACTOR's commissioning organization, deliverables, procedures, and planning activities to ensure a safe and efficient operational start-up. This includes developing pre-commissioning and commissioning activities with the proponent department, participating in HSE activities, managing systems and sub-systems definitions, and ensuring proper preparation and review of pre-commissioning and commissioning dossiers. Additionally, the role involves monitoring and reporting on CONTRACTOR/Subcontractor progress, issuing periodic progress reports, and organizing and coordinating commissioning execution activities. Package 4 Commissioning Utilities Leader: 1) Experience in OPERCOM ™ and ICAPS© application 2) At least 15 years of experience in Oil&Gas industry, including ~10 years of Pre-commissioning and Commissioning 3) Experience in preparation and execution of Operational and functional Tests for Utilities (Instrument Air compressors; Colling Water systems; Fire Water & Deluge system; Flares and Incinerators Fuel Gas and Diesel Fuel systems. 4) Experience in execution of the piping commissioning activities: chemical cleaning, flushing, drying, leak testing. 5) Knowledge and practical experience in application of the process and mechanical lock out / tag out systems.

Qualifications: The position requires a high level of knowledge in all types of activities within a petrochemical site, with multi-disciplines specialists needed and over 10 years of experience. Specific skills include a process or operation background, knowledge of EPCC contract management, and high competencies in OPERCOM® and ICAPS© tools. The ideal candidate should be methodical, well-organized, a team player, and exhibit a critical, constructive, ethical, and integrity-driven attitude. Fluency in English is required, and knowledge of Arabic is a plus.
Location : Jubail
Language / Level :
English : D-Full professional proficiency

2026-42236 - Instrument / Analyzer Commissioning Specialist M/F

Wed, 22 Jul 2026 22:14:34 Z

Contract type : Fixed-term-contract
Position description :
Basic Functions: The basic function of the Commissioning Instrumentation / Analyzer Specialist is to ensure that all pre-commissioning and commissioning activities for the Instrumentation / Analyzer discipline are prepared and executed according to the OPERCOM® methodology in a safe manner and according to the planned schedule. Main Accountabilities: The main accountabilities include ensuring that HSE is given the highest priority, coordinating and approving the quality and completeness of deliverables, assisting Commissioning Unit leaders in witnessing and monitoring pre-commissioning and commissioning activities, reviewing precommissioning dossiers, and monitoring all Instrument / Analyzer Commissioning activities.

Qualifications: The qualifications for this position include an engineer level or above education, high knowledge of instrumentation / analyzer activities within the Oil and Gas refinery, a minimum of 10 years of experience in a similar position, and specific skills such as knowledge of Management of EPCC contracts and OPERCOM® and ICAPS©. Additionally, the candidate should be methodic, organized, have a good team spirit, and be fluent in English, with Arabic being a plus.
Location : Jubail
Language / Level :
English : D-Full professional proficiency

2026-43063 - Chef de Chantier Turbines

Wed, 22 Jul 2026 22:09:17 Z

Contract type : Permanent contract
Position description :
MISSIONS: Réaliser, organiser et suivre les chantiers de machines tournantes, turbines ou auxiliaires dans le respect en termes de coût, qualité, délai. Il supervise une équipe de chef d'équipe et/ou de monteur mécanicien. Prendre en charge le matériel o Réaliser/s’assurer/valider l’inventaire du matériel (quantitatif avec contrôle visuel), les manutentions associées o Identifier/s’assurer/valider les pièces et les sous-ensembles et de leur stockage approprié o S'assurer/valider que l'ensemble des pièces et sous-ensembles sont disponibles Démonter et expertiser o Réaliser/s’assurer/valider le démontage et l’identification des pièces et un stockage adéquat des pièces et des sous-ensembles o Réaliser/s’assurer/valider le nettoyage approprié des pièces et des sous-ensembles o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique / des jeux fonctionnels o Identifier/s’assurer/valider les pièces à réparer ou à remplacer o Renseigner le compte rendu d’évaluation et proposer au pilote de l’affaire réparations à effectuer. Remettre en état et remonter le matériel o Réaliser/s’assurer/valider le contrôle dimensionnel et géométrique des pièces neuves ou réparées o Réaliser/s’assurer/valider le contrôle des jeux fonctionnels en cours de remontage o Réaliser/s’assurer/valider les opérations d’ajustage / montage / les opérations simples de tuyauterie et chaudronnerie / les travaux par point chaud (soudure, montage par dilatation thermique…) Opérations de réglage (sur chantier) o Réaliser/s’assurer/valider les opérations de réglage (lignage des internes d’une turbine, alignement machines, pesage de corps,…) Traçabilité des opérations o Remplir/s’assurer/valider les feuilles de contrôle associés aux opérations de maintenance effectuées o Participer/rédiger/valider les divers rapports et procès-verbaux (partie constat au minimum) et le faire signer au client o Proposer des solutions au pilote d’affaire o Renseigner et valider le Plan Qualité Affaire et/ou gamme Piloter l’activité o Valider et signer le PDP o Signer le PV d'ouverture de chantier et envoyer au pilote* d'affaire o Veiller à l'exécution des travaux attribués par pilote* d’affaire conformément au planning o Informer quotidiennement le pilote* d’affaire de l'avancement du chantier et émettre des rapports journaliers.... Assister lors de la mise en service (sur chantier) Assurer la gestion et l’animation des ressources (moyens humains, matériel et technique)

Maîtrise technique souhaitée de la maintenance industrielle de machines tournantes Maîtrise technique souhaitée d’ajustage Maîtrise des moyens de mesure Connaissance en lecture de plan Habilitations : pont roulant, CACES Capacité d’analyse, méthode et rigueur, esprit d’initiative Savoir quantifier et gérer les priorités Aptitude à se conformer aux objectifs de production / chantier Esprit d’équipe Anglais souhaité Le poste est à pourvoir en itinérance chez nos clients basés en France et une partie à l'étranger, le collaborateur peut également être amené à renforcer les équipes au sein de l'atelier de LONS lorsqu'il n'y a pas de chantier.
Location : LONS FRANCE
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency

2025-40184 - Commissioning Supervisor - Process M/F

Thu, 16 Jul 2026 06:35:31 Z

Contract type : Fixed-term-contract
Position description :
SPIE Global Service Energy currently hiring for Commissioning Supervisor – Process for Onshore Project in Basra, Iraq. Its a rotational role- 28/28 Job Purpose- Lead and supervise commissioning and start-up activities related to Commissioning Supervisor – Process systems on the onshore oil & gas project. Ensure commissioning tasks are executed safely, efficiently, and in compliance with project requirements. Main Responsibilities- · Supervise commissioning of process systems (separators, pumps, compressors, heat exchangers, utilities). · Plan and coordinate daily commissioning activities with technicians and engineers. · Ensure commissioning procedures and safety rules are strictly followed. · Lead troubleshooting and problem-solving during commissioning. · Validate test results, punch list clearance, and readiness for handover. · Coordinate with construction and operations teams to ensure system readiness. · Report progress and issues to the Commissioning Lead

Requirements- · Iraqi nationals from Basra region. · Engineering degree or technical diploma in Process Engineering or related discipline. · Minimum 5–8 years’ experience in process commissioning, including supervisory roles. · Strong knowledge of process equipment and systems. · Ability to read and interpret P&IDs, datasheets, and commissioning procedures. · Good leadership, communication, and reporting skills. · Strong commitment to HSE practices.
Location : Ratawi field
Language / Level :
English : B-Limited working proficiency

2025-40187 - Commissioning Supervisor - Instrumentation & Control System M/F

Mon, 13 Jul 2026 10:52:31 Z

Contract type : Fixed-term-contract
Position description :
SPIE Global Service Energy currently hiring for Commissioning Supervisor – Instrumentation & Control System for Onshore Project in Basra, Iraq. Its a rotational role- 28/28 Job Purpose- Lead and supervise commissioning and start-up activities related to Commissioning Supervisor – Instrumentation & Control System systems on the onshore oil & gas project. Ensure commissioning tasks are executed safely, efficiently, and in compliance with project requirements. Main Responsibilities- · Supervise commissioning of instrumentation and control systems (DCS, PLC, transmitters, valves). · Plan and coordinate I&C commissioning activities with the team. · Ensure loop checks, calibration, and functional tests are executed properly. · Lead troubleshooting and technical adjustments for I&C systems. · Validate commissioning results and ensure documentation is completed. · Coordinate with construction and operations teams for smooth handover. · Report progress and technical issues to the Commissioning Manager.

Requirements- · Iraqi national from Basra region. · Engineering degree or technical diploma in Instrumentation, Control Systems, or related discipline. · Minimum 5–8 years’ experience in I&C commissioning in oil & gas industry. · Knowledge of DCS, PLC, transmitters, analyzers, and control valves. · Ability to read and interpret P&IDs, loop diagrams, and control system documents. · Strong leadership and supervisory skills. · Strong commitment to HSE practices.
Location : Ratawi field
Language / Level :
English : B-Limited working proficiency

2025-40794 - Field Operator M/F

Thu, 09 Jul 2026 11:41:45 Z

Contract type : Temporary work contract
Position description :
Job Purpose Perform safe and efficient operation of onshore oil & gas production facilities. Monitor, control, and operate process equipment in the field to ensure production targets are met while respecting HSE standards and operational procedures. Main Responsibilities- Operate and monitor process equipment in the field (pumps, compressors, separators, heat exchangers, valves). Carry out regular inspections and ensure proper functioning of equipment. Adjust operating conditions as instructed by the Control Room Operator or Supervisor. Report abnormalities, alarms, and equipment failures promptly. Assist in start-up, shutdown, and emergency operations. Take readings and maintain accurate log sheets. Apply and respect HSE rules and participate actively in safety programs. Support maintenance teams during equipment interventions. Supporting the SIMOPS and Field Ops team on site with Field Operations. Providing in a team of 8 B2B field Operators, contribution to the different jobs ongoing onsite, to ensure smooth and continuously improving production. Always ensuring and maintaining safe and streamlined field operations.

Technical diploma or equivalent in Process, Mechanical, Electrical, or related field. Minimum 1–5 years’ experience as Field Operator in oil & gas production facilities. Knowledge of process systems and field operations (pumps, compressors, separators, utilities). Ability to follow instructions and apply operational procedures. Good communication and teamwork skills. Strong commitment to safety and environment protection. Past experience as a Field Operator Experience in control room operations is a preferred. An Iraqi National, with a residency in Basra or nearing areas.
Location : Ratawi Oil Field, North Rumaila
Language / Level :
English : C-Professional working proficiency

2025-40816 - HVAC Technician M/F

Mon, 06 Jul 2026 12:03:30 Z

Contract type : Temporary work contract
Position description :
Support commissioning and start-up activities related to HVAC systems on the onshore oil & gas project. Work with the commissioning team to prepare, test, and hand over HVAC systems safely and on time. Main Responsibilities Assist in commissioning of HVAC systems (including air handling units, chillers, ventilation fans, ductwork, and control systems). Perform functional checks, start-up, and performance testing of HVAC equipment. Support troubleshooting and adjustments during commissioning of HVAC systems. Follow commissioning procedures and instructions from supervisors. Document commissioning activities and test results for HVAC systems. Respect HSE rules and ensure safe working conditions. Support punch list activities and handover of HVAC systems to operations.

Technical diploma or equivalent in Mechanical Engineering, HVAC, or related field. Minimum 3–5 years’ experience in HVAC maintenance or commissioning in oil & gas or industrial projects. Knowledge of HVAC systems, controls, and associated equipment. Ability to read HVAC drawings, P&IDs, and technical documents. Good teamwork and communication skills. Strong commitment to safety.
Location : Basra, Artawi Field, AGUP Ph1 Project, Total Energies
Language / Level :
English : C-Professional working proficiency

2026-43979 - Commissioning & Startup Lead - SMR H2 plant M/F

Mon, 06 Jul 2026 06:59:00 Z

Contract type : Fixed-term-contract
Position description :
• Extensive experience in the commissioning, startup, performance testing, and operational readiness of Steam Methane Reformer (SMR) units in petrochemical and hydrogen production facilities. • Led pre-commissioning and commissioning activities, including mechanical completion verification, system turnover, punch-list management, flushing, cleaning, drying, leak testing, and catalyst loading. • Managed startup activities for reformer furnaces, feed gas systems, steam systems, fuel gas systems, process air systems, syngas production units, and associated utility systems. • Coordinated multidisciplinary teams involving operations, engineering, construction contractors, licensors, and vendors to ensure safe and efficient plant startup. • Developed and reviewed commissioning procedures, startup plans, test packages, operating manuals, and turnover dossiers. • Conducted functional testing of control systems, safety interlocks, ESD systems, burner management systems (BMS), and process control loops. • Supported catalyst reduction, reformer heat-up, steam-out operations, feed introduction, process optimization, and performance guarantee testing. • Ensured compliance with HSE requirements, process safety management standards, and permit-to-work systems throughout commissioning and startup phases. • Participated in troubleshooting process upsets, equipment performance issues, and optimization of hydrogen and syngas production. • Successfully handed over commissioned systems to operations while ensuring achievement of design capacity, reliability, and performance targets.

Education: Bachelor's degree in Engineering Experience: Minimum 10+ years of experience in Oil & Gas industry. Hands on experience in commissioning of SMR H2 plant
Location : Jubail, Saudi Arabia
Language / Level :
English : D-Full professional proficiency

2026-42904 - COM LEAD ELE / MECHA / I&C / PIPING / PROCESS M/F

Sun, 05 Jul 2026 11:56:25 Z

Contract type : Temporary work contract
Position description :
Role Overview Each Commissioning Discipline Lead is responsible for managing and executing commissioning activities for their respective discipline on site, under the supervision of the Commissioning Site Lead (CSL). Key Responsibilities Lead and supervise discipline-specific commissioning activities on site Manage execution teams (supervisors, technicians). Ensure execution in line with OPERCOM, project procedures, and HSE standards Coordinate with CSL on: Planning and priorities Technical issues and interfaces. Ensure proper system/subsystem completion and handover readiness Support pre-commissioning, commissioning, and start-up phases. Identify and resolve technical issues and constraints. Operate within SIMOPS and brownfield conditions. Report progress, risks, and KPIs Disciplines- I&C Commissioning Lead PVV Commissioning Lead ELE Commissioning Lead MECA Commissioning Lead Process Commissioning Lead

Qualifications & Experience Minimum 10–15 years Oil & Gas experience Proven experience in: Onshore commissioning Brownfield / SIMOPS environments Experience managing site teams
Location : Ratawi field
Language / Level :
English : D-Full professional proficiency

2026-43975 - CSU Engineer ASU M/F

Sun, 05 Jul 2026 08:20:12 Z

Contract type : Fixed-term-contract
Position description :
A CSU (Commissioning, Startup, and) Engineer for an Air Separation Unit (ASU) is a specialized process engineer. They are responsible for transitioning a newly constructed cryogenic plant from its mechanical completion into full, reliable, and safe commercial operations. Key ResponsibilitiesPre-Commissioning & Commissioning: Inspect and test plant equipment (compressors, expanders, cold boxes, molecular sieves, and distillation columns) to ensure they meet engineering designs and safety standards. Plant Startup: Execute plant purges, pre-cooling, liquefaction, and cryogenic distillation to reach specified product purities (e.g., 99.5% oxygen, nitrogen, and argon).Performance Testing: Conduct operational and turndown tests to ensure the unit achieves designed output, efficiency, and energy consumption guarantees. Troubleshooting: Resolve process bottlenecks, pressure drop issues, temperature anomalies, and equipment vibrations during early operations.Safety & HAZOP Compliance: Enforce strict industrial safety protocols (especially critical for high-pressure pure oxygen systems) and participate in hazard and operability studies. Documentation & Handoff: Write detailed Standard Operating Procedures (SOPs), alarm response plans, and train the permanent operations team.Typical

Requirements Education: Degree in Chemical Engineering, Mechanical Engineering, or process-related discipline. Experience: 15+ years of hands-on operator or engineering experience with industrial gas facilities, specifically focusing on cryogenic ASUs and molecular sieve technologies (TSA). Core Competencies: Deep understanding of thermodynamics, gas compression, cryogenic distillation, and process control systems (DCS/SCADA). Safety Certifications: Relevant local safety credentials (often including Confined Space Entry, Fall Protection, WHMIS/OSHA equivalents)
Location : Duba,Neom
Language / Level :
English : D-Full professional proficiency

2026-43313 - Opercom Commissioning Process/Mechanical Advisor M/F

Thu, 25 Jun 2026 07:31:01 Z

Contract type : Temporary work contract
Position description :
o Provide guidance on process and mechanical commissioning strategy. o Review commissioning sequence of utilities, safety systems, hydrocarbon systems, process packages o Review procedures for process start-up, package commissioning, mechanical preparation o Validate technical content prepared by ITF writers o Validate alignment between start-up logic and commissioning execution o Ensure procedures follow OPERCOM commissioning principles

• Duration: 6 weeks, 5 days/week, 9h/day (including lunch) • Location: Fully Remote
Location : Remote
Language / Level :
English : D-Full professional proficiency

2025-41493 - Commissioning Specialist/ Commissioning Leader M/F

Mon, 22 Jun 2026 07:24:46 Z

Contract type : Fixed-term-contract
Position description :
Commissioning Leader- Wet End (Polyethylene/ HDPE) Commissioning Leader- Dry End (Extruder Experience-Coperion preferred) Commissioning Leader- Boiler (Olefin Experience) Commissioning Specialist- Piping Commissioning Specialist- Rotating equipment Commissioning Specialist- Static equipment Commissioning Specialist- Electrical Commissioning Specialist- Instrument / Analyzer Commissioning Specialist- Heater Commissioning Specialist- HVAC Commissioning Specialist- Process / Process System Commissioning Specialist- Telecom Commissioning Clerk Handover, ICAPS, Punch Commissioning Specialist- Security System Commissioning Coordinator (SIMOPS)

The position requires a high level of knowledge in all types of activities within a petrochemical site, with multi-disciplines specialists needed and over 10 years of experience. Specific skills include a process or operation background, knowledge of EPCC contract management, and high competencies in OPERCOM® and ICAPS© tools.
Location : Jubail
Language / Level :
English : A-Elementary proficiency

2026-42232 - Piping Commissioning Specialist M/F

Tue, 16 Jun 2026 05:36:12 Z

Contract type : Fixed-term-contract
Position description :
Basic Functions: The primary function of the Commissioning Piping Specialist is to ensure that all commissioning activities for piping disciplines are prepared and executed according to OPERCOM® methodology in a safe manner and according to the planned schedule. This role is crucial for smooth coordination with other project entities, including the Interface department, Integration team, Construction, and Project Services. Main Accountabilities: The Commissioning Piping Specialist is responsible for ensuring that Health, Safety, and Environment (HSE) is given the highest priority, and that all piping personnel are adequately trained and comply with job instructions. He coordinates, reviews, and approves the quality and completeness of deliverables and procedures for piping activities. Additionally, he assists the Commissioning Unit leader in witnessing and monitoring commissioning activities, reviewing commissioning progress, and ensuring smooth transitions from commissioning to start-up phase.

Qualifications: The position requires an engineer level or equivalent education, with a high knowledge of piping activities within a petrochemical site. A minimum of 10 years of experience in a similar position of piping commissioning or construction is necessary. Specific skills include knowledge of EPCC contract management, OPERCOM®, and ICAPS©. The candidate should be methodic, organized, and possess a good team spirit, along with fluency in English and preferably Arabic.
Location : Jubail
Language / Level :
English : D-Full professional proficiency

2026-42569 - Commissioning Specialist Electrical M/F

Mon, 15 Jun 2026 08:37:48 Z

Contract type : Fixed-term-contract
Position description :
Basic Functions: The basic function of the Commissioning Electrical Specialist is to ensure that all pre-commissioning and commissioning activities for electrical disciplines are prepared and executed according to OPERCOM® methodology in a safe manner and according to the planned schedule. This role is crucial for the smooth coordination of various project entities, including the Interface department, Integration team, and Project Services. Main Accountabilities: The main accountabilities of the position include prioritizing Health, Safety, and Environment (HSE) for all electrical personnel, coordinating and approving quality and completeness of deliverables, assisting Commissioning Unit leaders in witnessing and monitoring pre-commissioning and commissioning activities, and reviewing pre-commissioning dossiers and attached preliminary checks. The specialist is also responsible for supervising the management and operation of switchgears and switchboards manipulations performed by EPCC Contractors after energization of high voltage networks within the electrical substation for commissioning tests together with the Proponent Electrical team.

Qualifications: The qualifications required for this position include an engineer level education or above, high knowledge of electrical activities within oil and gas units, especially high voltage (240 kV), and a minimum of 10 years of experience in a similar position of electrical commissioning engineer for high voltage systems. Specific skills such as knowledge of EPCC contract management, OPERCOM®, and ICAPS© are a plus. Additionally, the candidate should be methodic, organized, have a good team spirit, and be fluent in English, with Arabic being a plus.
Location : Jubail
Language / Level :
English : D-Full professional proficiency

2026-43605 - INSTRUMENT SENIOR TECHNICIAN M/F

Fri, 05 Jun 2026 05:44:09 Z

Contract type : Permanent contract
Position description :
HSE: · Ensures that COMPANY’s HSE rules and regulations are strictly observed, (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during the performance of maintenance operations placed under his/her responsibility. · Establishes and maintains a strong safety culture in line with TotalEnergies’ HSE requirements and rules. · Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (If required) · Update his technical documentation. · Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about any HSE issues and proposing corrective solutions. · Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) · Ensure validity of work permit relevant to the work scope before handling a task. · Checks and verifies that mandatory aspects (including those concerning local law scenarios) are properly implemented for all activities conducted, METHODS · Contribute to relevant kick of meeting related to maintenance operation. · Keeps a critical eye on current preventive maintenance programs and, suggests improvements if required, · Identifies recurrent corrective maintenance interventions, analyses them, and suggests improvements, OPERATION · Organises and performs on site the maintenance operations which are placed under his/her responsibility, · With his/her teams, assists specialists working under Specific Maintenance Contracts (SMC), · Monitors the functioning of systems placed under his/her responsibility, · Ensures that the transfer of knowledge by mentoring occurs properly within his/her teams, and actively · Manages the team of technicians directly under his/her responsibility, · Performs any intervention within his/her field of competence at the request of the CSR. · Takes in charge the systems under his/her responsibility in case of breakdown, until correct operation status resumes. INSTRUMENT SENIOR TECHNICIAN SPECIFIC · Must have advanced technical knowledge of all types of Instrumentation, Process Control, Fiscal Oil & Gas Metering, Fire & Gas and ESD safety systems. · In addition to the duties of an Instrument technician, is also responsible for Level 1,2,3 servicing, maintenance and testing of the above equipment as per the CMIMS – UNSIOL system. · DUCSAT offshore operations are normally 24hr. Day shift 12 hours / Nightshift 12 hours to maximise ‘tool time’.

A basic knowledge of the process of oil and gas operations & installations and a thorough knowledge of the equipment used in oil and gas operations & installations. The Ability to lead and motivate multi-national teams. Pride in his/her work, ability to maintain good relations with colleagues and others. Physically ability to work on offshore installations in the climatic conditions of the site. He/she must have proven ability as a leader of small teams. Perfectly competent and independent in his/her field, he/she must show common sense and organisational ability. Natural authority, founded on his/her abilities and on the trust he/she has in his/her teams, is essential
Location : Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43599 - ELECTRICAL TECHNICIAN M/F

Thu, 04 Jun 2026 14:30:27 Z

Contract type : Permanent contract
Position description :
HSE: Ensure HSE policy fulfillment during his activities. Establishes and maintain a strong safety culture in line with TotalEnergies’ HSE requirements and rules. Complies with HSE Legislation (Occupational and process), TotalEnergies’ standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Complies with Operating Procedures and Guidelines with the asset to ensure process safety, operational safety, and plan integrity. Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specifics ones (If required) Report anomalies, accidents, near misses Operates in conformity with mechanical/electrical codes, standards, regulations, and industry best practices (ASME, API, ANSI, OSHA, ISO 45001, ISO 14001) Check validity of work permit relevant to work scope before handling a task. Checks and verifies that mandatory aspects (including those concerning local law scenario) Participate to safety talk before and after intervention. Participate to key procedure audits And for Electricity in particular: Knowledge of electrical Certification requirements and be certified as required. Be aware of permit to work and electrical isolations requirements. Be aware of gas test requirement. Understand hazards associated to leak tests and hydrotests. THEORICAL KNOWLEDGE Have a basic understanding of facilities/process (from well to export). Be knowledgeable of hydrocarbons behaviour and associated risks (explosion, asphyxia…). Understanding and use of basic laws and units of physic (resistance, inductance, DC & AC current and voltage, frequency, active and reactive power…). Be able to differentiate low and high voltages. Possess notions on cable sizing and voltage dropping. Be able familiar with a general facilities electrical network philosophy Have a basic understanding of inter-tripping and interlocking action, load shedding and load sharing modes. For electrician technicians only, have a basic understating of cathodic protection system. Understand working principle of main electrical equipment For those, be aware of their preventive maintenance requirements. Be aware of CBM (thermography) requirement and purpose. Understand principles and know the different systems of earthing Understand preventive, corrective maintenance and maintenance plan concepts. OPERATION Be able to maintain and troubleshoot small electrical installation like lighting and heat tracing circuit. Be able to identify the different types of cables (including ground ones) connect those properly (using lugs) and perform their proper laying Be able to do preventive maintenance on non-critical equipment LV Electrical equipment: - Be able to dismantle, replace defective parts, reassemble, reconnect, and check the system. - Identify all accessories - Identify correctly for other people risks generated by his activity.

Perfectly competent and independent in his field specially: Must show common sense, organization ability and responsibility. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Rigorous and methodical in his approach to operation and able to anticipate and analyze situation. Able to complete mechanical preventive and corrective maintenance according to planning and instructions.
Location : OFFSHORE
Language / Level :
English : C-Professional working proficiency

2026-43593 - CRANE PREPARATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:35:36 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Gives his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs’, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Technical Preparation and Site Support
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43592 - INSTRUMENTATION PREPARATOR (Onshore) M/F

Thu, 04 Jun 2026 12:33:30 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Technical Preparations and Site Support
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency

2026-43591 - INSTRUMENTATION ENGINEER (onshore) M/F

Thu, 04 Jun 2026 12:31:54 Z

Contract type : Permanent contract
Position description :
HSE Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. GENERAL DESCRIPTION: Responsible for all INSTRUMENT & TELECOMMS Preparations subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to Client’s Company rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team MAIN FUNCTIONS • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability • Take charge of Work Orders under His/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines. Typical 5 Weeks to the execution start date. • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production. (Defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the TEPDK to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required

Experience in INSTRUMENT/TELECOMMS Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources.
Location : Kanalen 1, 6700 Esbjerg
Language / Level :
English : C-Professional working proficiency