Export RSS des offres - Seulement les offres à la une : Non / Profil : Facility Management / Maintenance / Entité : SPIE Belgium, SPIE Global Services Energy

2026-44546 - Lab Technician M/F

Tue, 20 Oct 2026 12:32:41 Z

Type de contrat : Interim
Description du poste :
We currently have an opportunity within SPIE Oil & Gas Services Middle East LLC for a: Lab Technician Job Purpose: The Laboratory Technician is responsible for the safe, accurate, and timely execution of routine and non-routine analytical tests on refinery process streams, finished products, and raw materials. Operating under direct supervision, the technician follows standardized procedures to generate high-quality data that is critical for process control, product quality certification, and environmental compliance. Your main duties will be to: • Pick samples from designated plant sample points as assigned, following all safe work practices and permit procedures. • Receive, log, and properly label samples in the laboratory logbook upon receipt. • Prepare samples for analysis, which may include filtration, dilution, homogenization, or derivatization. • Prepare standard solutions, reagents, and mobile phases as directed by SOPs. • Label all solutions with contents, concentration, preparation date, expiration date, and preparer's initials • Adhere to all quality control procedures outlined in the laboratory's QMS. • Adhere to all laboratory safety protocols and HSE policies without exception. • Operate a wide range of authorized laboratory instruments. • Perform routine and non-routine analytical tests on a variety of samples including crude oil, intermediate process streams, fuels (gasoline, diesel, jet fuel), gases, amine solutions, water, wastewater etc. • Execute tests strictly in accordance with approved Standard Operating Procedures (SOPs) and international standard methods (e.g., ASTM, UOP, ISO, Shell SMS). • Accurately and legibly record all raw data, observations, and calculations in laboratory notebooks and worksheets. • Perform basic calculations and data transformations as required by the test method. • Report any instrument malfunction or performance drift immediately to the Lab Engineer. • Report all unsafe conditions, near misses, and incidents immediately to the Lab Engineer / Lead Lab Engineer. • Participate in safety meetings, toolbox talks, and emergency drills. • Handle all chemicals and hazardous waste according to established safety procedures. • Perform any other duties as assigned by the Lab Engineer or Lead Lab Engineer. Rotation: 10 weeks on / 2 weeks off

Ideally, you will have a Degree in Chemical engineering discipline from a recognized university with 4 years' experience in Oil & Gas (incl. but not limited to Refinery)/ Petrochemical fields or Equivalent” or “2 years in a relevant position title”. You will have proven experience in Safety precautions and occupational hazards in the use of equipment; safe work methods and practices. You will have a good level of computer literacy and be proficient in industry commissioning software and systems and advance skills in Microsoft Office. You will need excellent communication and presentation skills in English both written and verbal in English.
Lieu de travail : Basra, Iraq
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-45080 - Maintenance Supervisor - Building Services - Bruxelles

Mon, 19 Oct 2026 12:01:56 Z

Entité : SPIE Belgium aide ses clients d'une part à concevoir et réaliser leurs équipements techniques et d'autre part, à exploiter et assurer la maintenance de leurs installations.
Métier : Facility Management / Maintenance
Type de contrat : Durée indéterminée
Description du poste :
Vous débutez votre aventure professionnelle chez SPIE au sein de notre Division Services basée à Anderlecht.(Bruxelles) Cette BU est chargée de superviser des projets de maintenance préventive et curative dans le secteur tertiaire, sur des sites divers tels que des hôtels, des sites médicaux et des bureaux. Notre objectif est d'assurer la performance et le confort à long terme de ces installations. En tant que Maintenance Supervisor vous menez à bien les affaires sur les plans technique, commercial, contractuel, et financier, en cherchant à améliorer la situation de SPIE dans les affaires qui vous sont confiées. Pour mener à bien votre mission, vous êtes en contact régulier avec les clients et les fournisseurs. Vos responsabilités : Assurer le suivi relationnel des clients acquis. Assurer du bon suivi du planning préventif et du pilotage des techniciens. Établir les offres pour les petits projets et se coordonner avec les équipes "projet" pour les plus gros. Préparer la facturation des régies et des projets. Être un support technique ou logistique pour vos équipes Être un acteur majeur dans le cadre de la gestion énergétique de vos contrats. La gestion financière de vos contrats et projet avec le support du Contract Manager et du Cost Controller. Coordonner les équipes opérationnelles, back office et projet et s'assurer de la bonne communication entre ces différents acteurs tout au long de la durée du contrat. Pour ce faire, vous vous impliquez personnellement dans la vie des chantiers par une présence effective.Faire appliquer les normes de sécurité sur vos chantiers.

Vous avez une expérience de 5 ans minimum dans le domaine de l'HVAC. Vous êtes une personne passionnée par la technique, enthousiaste et capable de travailler en autonomie et en équipe. Vous êtes orienté résultat et pragmatique. Vous osez prendre des initiatives.
Lieu de travail : Rue des Deux Gares 150 - 152 1070 BRUXELLES
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle

2026-44866 - Project Control Engineer M/F M/F

Sun, 18 Oct 2026 22:15:31 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Project Control Engineer JOB PURPOSE The Project Control Engineer supports the Senior Project Control Engineer in planning, monitoring, and controlling Project cost, schedule, and progress performance across Major Projects, ensuring alignment with contractual obligations, Project objectives, and Company standards. The role assists in analyzing Project schedules, forecasts, and progress reports, enabling accurate tracking of Project performance and supporting informed decision-making. In addition, the role-holder is responsible for promoting, adhering to, and ensuring compliance with QAFCO’s Occupational Health & Safety, Environmental, Energy, and Quality management systems and standards, while coordinating effectively with other Project Team members to ensure successful Project delivery. KEY ACCOUNTABILITIES Management Systems · Awareness of QAFCO Integrated Management Systems (Quality; Environment; Occupational Health & Safety; Responsible Care; & Energy Management Systems and IFA Product Stewardship) · Comply with all the relevant policies and procedures of QAFCO Integrated Management Systems Ensure that QAFCO and Project HSEQ requirements take the highest priority and actively implemented in Project day-to- day activities. Project Planning & Scheduling Ensure that the Contractor develops and maintains Project schedules covering engineering, procurement, construction, commissioning, and handover phases in full compliance with EPCC Contract requirements. Oversee EPCC Contractor’s performance of critical path analysis, float management, and schedule optimization to ensure timely delivery of project milestones. Coordinate with discipline leads and contractors to ensure alignment of detailed schedules with the overall project timeline. Lead the development of baseline schedules, including resource loading. Monitor progress against baseline and forecast schedules, identifying delays and recommending recovery plans. Implement and manage planning tools and ensure consistent use across all stakeholders. Progress Monitoring & Reporting Track and report physical progress, earned value, and schedule performance. Prepare and present weekly/monthly progress reports, dashboards, and executive summaries for senior management and stakeholders. Coordinate with contractors to review and validate monthly progress reports and updates. Support the preparation of Steering Committee presentations, highlighting key risks, achievements, and deviations. Maintain accurate and auditable records of planning data, progress curves, and performance trends. Cost & Resource Planning Ensure EPCC Contractor develops resource histograms, manpower plans, and productivity tracking. Assist in forecasting cost impacts of schedule changes and delays. Provide input for budget planning, cash flow projections, and cost control

Bachelor’s degree in Engineering (Mechanical, Chemical, or related discipline). Professional certification in project management or controls (e.g., PMP, CCP) is preferred. Minimum 10 years of experience in project controls within major projects, preferably in fertilizer or petrochemical plants. Proven expertise in planning and coordinating integrated activities for onshore field equipment. At least 3–5 years of experience on large-scale projects (EPCC or similar). Skills & Competencies: Fluency in English (written and spoken). Strong interpersonal and organizational skills. Advanced computer literacy and proficiency in Microsoft Office Suite. Familiarity with project control software (e.g., Primavera P6, MS Project) is an advantage.
Lieu de travail : Doha
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-45058 - Field Production Supervisor H/F

Fri, 16 Oct 2026 22:20:07 Z

Type de contrat : Contrat international
Description du poste :
OPERATION DEVELOPMENT PHASE Develop the PDH/PP site's operations philosophy in line with industry practices and regulations; define objectives, KPIs and reporting. Define operational services, including control room, chemical injection and sampling, and identify subcontracting, resources, tools, storage and laboratory equipment needs. Assess operational risks and define mitigation measures. Estimate the annual operations budget with Maintenance, Inspection, preparation and Procurement teams. Review engineering and design documents to ensure plant operability. OPERATION & MAINTENANCE PHASE Supervise production, meet operational targets and ensure compliance with safety, occupational health, environmental and security requirements. Coordinate Production and Offsite activities, including flare management and water quality control. Inspect operating areas, ensure housekeeping and proper waste disposal, eliminate unsafe conditions and check work permits. Lead daily operations meetings and coordinate supervisors to meet scheduling requirements. Coordinate start-ups and shutdowns according to approved plans and support the Production Supervisor. Stabilize plant conditions during upsets affecting multiple areas; direct response priorities with the Production Supervisor and Senior Operators, focusing on shared process and utility networks and product quality. Authorize urgent chemical supplies outside normal hours and complete the Production Supervisor report. Report production performance to Management and attend safety meetings. Support emergency preparedness and lead immediate responses to unstable conditions with Production, HSEF and Security teams. Authorize high-risk work and emergency maintenance outside normal hours; ensure risk assessments for unusual activities and authorize hot work when required. Contribute to root cause analyses, reliability studies, incident investigations, training and operating procedures. Support the Site Manager and Optimization team on specific studies and other assigned duties. CONTRACT TERMS & MOBILITY Local employment contract within an international group entity or freelance contract, depending on profile. Preparation phase: fully remote, with missions to Cergy (France) and occasional overseas assignments at contract start. Phases 2-3: based in Türkiye on a resident or rotational basis. Eligible expatriate assignments include company support for accommodation, travel, local transportation and meals, in accordance with company policies.

Experience: Minimum of 10 years’ experience as a production superintendent for a petrochemical site, with PDH / PP process. Education: Master’s degree in Chemical, Mechanical, or Process Engineering (or equivalent technical qualification). Advanced certifications in operations management or process safety are advantageous. English: B2 level mandatory. Turkish nationality or speaking people is a strong plus. Strong background in the interpretation of drawings, specifications and production processes, Advanced certifications in operations management or process safety are advantageous. Knowledge in UOP and LyondellBasell process is a plus. Excellent interpersonal skills with the ability to work closely with diverse team members, Good working knowledge of MS Office products. Must work under pressure
Lieu de travail : Adana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-45057 - Production Manager H/F

Fri, 16 Oct 2026 22:20:05 Z

Type de contrat : Contrat international
Description du poste :
MISSIONS : Lead and coordinate daily production operations across PDH and PP units, ensuring adherence to production schedules, targets, and safety protocols. Interface with the Production Superintendents to monitor unit performance, troubleshoot issues, and maintain consistent operations. Collaborate with the Production Planning Manager to align operational capacities with short- and long-term production plans and grade schedules. Work closely with the Maintenance & Inspection Manager to coordinate planned maintenance, resolve equipment reliability issues, and minimize downtime. Analyse production data and KPIs to identify improvement opportunities and implement corrective actions for underperformance. Ensure compliance with HSE, quality, and regulatory standards throughout production activities. Review daily production reports, conduct shift handover meetings, and ensure timely communication of critical operational information. Participate in management-of-change (MOC), pre-startup safety reviews (PSSR), and risk assessments related to production processes. Coordinate plant readiness for shutdowns, startups, and grade changes, ensuring minimal operational disruption. Contribute to the development of annual production strategies, capacity utilization plans, and cost optimization initiatives. Provide leadership, coaching, and development to production team members and ensure high standards of operational discipline. Support incident investigations and root cause analyses for production-related events and ensure timely implementation of corrective actions. CONTRACT TERMS & MOBILITY Local employment contract within an international group entity or freelance contract, depending on profile Working arrangements: Preparation phase: Full remote with missions in Cergy (France) and abroad at contract start for spot missions overseas Phase 2-3: The position will be based in Türkiye on a resident or rotational basis Eligible expatriate assignments with company support for accommodation, travel, local transportation and meals in accordance with applicable company policies.

Education : Master’s degree in Chemical, Mechanical, or Process Engineering (or equivalent technical qualification). Advanced certifications in operations management or process safety are advantageous. Experience: Minimum of 10 years’ experience as a production superintendent for a petrochemical site, with PDH / PP process. Strong knowledge of operations philosophies, process safety, and performance management systems. Excellent leadership, communication, and organizational skills. Familiarity with international standards and best practices for operations and safety (e.g., API, ISO). Ability to lead and collaborate in a multicultural and cross-functional environment. Good Physical Health. Able to work under pressure. Previous experience in PDH-PP plant is an advantage. Capable of giving strong attention to details and problem-solving skills. Fluent in English written and verbal. Strong notions (verbal) in Turkish are a plus.
Lieu de travail : Adana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42133 - MAINTENANCE PLANNING ENGINEER MECHANICAL M/F

Fri, 16 Oct 2026 22:05:15 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : MAINTENANCE PLANNING ENGINEER MECHANICAL - Prime responsibility for carrying out the planning of daily maintenance activities with primary responsibility to ensure ‘right-first-time’ job performance so that equipment reliability is maximized, while improving maintenance ‘tool time’ ,’work quality’ by anticipating and eliminating potential delays through planning and coordination of labor and non-labor resources including materials and services. - The role is expected to be able to remove uncertainty to execute planning in a systematic, efficient and economical way with forecasted maintenance job planning approach. - He or she should be able to independently develop cost and time estimates of planned maintenance work to meet budgets and schedules. - Planning Engineer shall have Competency and work experience in SAP Maintenance module, preferably in SAP S4-HANA including order planning, Purchase requisition, service entry sheets, call-off orders, service orders, Maintenance related Master data creation, updation, deletion etc. Routine maintenance job planning - Establish, maintain and improve the Maintenance Plans within the area of responsibility - Develop equipment preventive maintenance schedule. - Based on the daily new work request from production, Planning engineer shall prepare detailed activity break up along with the estimation of required resources for the job i.e. internal and external manpower, materials and services. - Preparing work pack for each work order. - Coordinate and review the work plan for assigned maintenance activities; review and evaluate planned work, methods , procedures and oversee spare parts inventory. Contract Handling - Participate in maintenance contracts handling including scope development, specifications, initiating procurement process, technical evaluation and provide support to superiors for management approval process as and when required. - Day to day coordination with contractors to supply manpower and/or services based on requirement during daily work order planning. - Verify and process the invoices submitted by the contractor. Spares and Materials management - Communicate and Co-ordinate with end-users to ensure spares and materials are made available by Planning Engineers for schedule activities. Also provide feedback to MRP so that cost-effective replenishment levels are maintained. - Updating the item master including item specifications, Bill of Material, Spare Parts Criticality and new item codes in ERP as and when required. - Responsible for the Periodic Inventory review & Changes in the buffer stock levels with the coordination of end-users. - Co-ordinate with Supply Chain department and Contractors for procurement of spares to ensure the availability.

Bachelor’s Engineering degree (12+4 years) in (Mechanical ) 10 years relevant experience in Oil & Gas/Petrochemical/Fertilizer industry and competency* Hands-on experience of the Work order part of EAM (enterprise asset maintenance) module of SAP would be preferable. Competency and work experience in ERP – SAP, preferably in SAP S4-HANA including Competency and work experience in Maintenance related Master data creation, master data updating, master data deletion etc in SAP. 1. Strong technical background and maintenance field experience. 2. Experience in daily maintenance planning. 3. SAP ( Master data- Establishment PM plans, creation of equipment, Functional location, BOM, Material Catalogue). 4. Experience in technical evaluation and spare parts management. 5. Experience in contract establishment. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Lieu de travail : Mesaid
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-45052 - PLC Supervisor* M/F

Fri, 16 Oct 2026 06:53:29 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Maintain, operate, modify and perform routine tasks on the PLCs, HMIs, automation computers and Unit Control Panels (UCP) Carry out modifications on both hardware (input, output, communication cards etc) and software (control and safety logic, sequence logic etc) of all systems (compressors, pumps, oil & gas metering system, High Integrity Pressure Protection System (HIPPS), Tank Gauging System (TGS), Power Distribution Control System (PDCS), Telemetry System, machine monitoring system etc), under his responsibility as may be required, requested or directed by COMPANY. Prepare with the Control System Specialist, preventive and corrective actions and modifications of the systems under his responsibility. Manage and document in technical reports, interventions using the CMIMS and work packs provided by the planning team. Follow up the parameter values and alarms in the concerned systems under his responsibility and perform trouble shooting if required. Control and apply inhibits in the systems as directed and controlled by COMPANY rules and procedures. Maintain an accurate and auditable log of all system faults and inhibits (Short term and long term). Identify, in the preparatory stage of maintenance works, any sensitive operation and ensure that a proper assessment of the risks involved is carried out beforehand, Identify recurrent corrective maintenance interventions, analyse them and suggest improvements, as well as problems related to availability, quality and obsolescence of spare parts. Track any backlog of work in area of responsibility and suggest corrective measures to COMPANY and CONTRACTOR to improve the management of the backlog. Review and assure that all Software Modifications and corrective actions are validated by COMPANY and all impacted documentations are updated after implementation. Quality Assurance: Verifies the quality of his planning by frequent checks of supervisor reports in CMMS Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload which is unachievable with the resources provided onboard. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering or equivalent degree, 10+ years’ experience in the field of control system and at least 3 years as PLC Supervisor in Oil and Gas / Petrochemical industry, English fluency mandatory, knowledge of French & Portuguese language recommended Specific Knowledge: Advanced skill in PLC´s - SIEMENS (S5 an added advantage) & Yokogawa Industrial Automation Systems, Panels and HMI´s. Advantage if experienced in Emerson Delta V, Rockwell/Allen-Bradley, Emerson Pride in his work, ability to maintain good relations with colleagues and others, Highly Proactive individual Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45051 - CMMS Planner* M/F

Fri, 16 Oct 2026 06:52:08 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Prepares on site the maintenance and inspection operations within CMIMS (SAP) Plans maintenance and inspection operations (routine and short-term) taking into account the spare parts and resourcesReview of Notifications and Attribution of the Trade Attribution of operation to Long term and short term planning Review of the Operations priorities Creating work orders Identification of Work orders with revision code Follow-up of the planning of work orders short term and preventive maintenance Follow-up of parts orders for Short term Work orders Plans Short term corrective Work orders and Preventve maintenance Work orders Coordinate maintenance operations managed by GMC:Make sure that material requested by onshore fit with site material (if necessary request to update the BOM) Check availability of spare parts with Preparators assitance for the one which are stored onshore Dispatch preparation work between onshore and offshore (PTW, spare parts, lifting,etc...) and ensure the follow up. Gather the preparation works to ensure correct execution and follow up. Follow-up material delivery onsite and inform onshore and supervisors Follow-up of reporting into SAP by supervisors by continuous reminders and support in the reporting activities Check and comments activities prepared onshore by preparation team including PTW and reverts with comments if necessary Integrate PTW prepared offshore into the site planning by participating to PTW meeting for submission and recovery of permits Assist preparation team in clarification of notifications for activities to be prepared urgently onshore Follow closely Critical maintenance activities In collaboration with the Trade Supervisor, he prepares interventions Takes part in daily, weekly and coordination meetings on site Ensures the Accurate and timely closeout of all CMIMS Work Orders and ensures accurate and adequate history in the activity reports. Keeps track of any backlog of work in his area of responsibility and suggests corrective measures to the CSR if this backlog threatens to become unmanageable, Quality Assurance: Verifies the quality of his planning by frequent checks of supervisor reports in CMMS Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload which is unachievable with the resources provided onboard. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering or equivalent degree, +5 to 10 years’ experience in the Planning of maintenance activities on oil and gas production installations, Fully conversant with SAP/R3 Fully conversant with PRIMAVERA P6 English fluency mandatory, knowledge of French & Portuguese language recommended Ability to Coach, Mentor and advise, motivate multi-national teams Pride in his work, ability to maintain good relations with colleagues and others, Highly Proactive individual Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45045 - CBM Supervisor* M/F

Thu, 15 Oct 2026 08:00:04 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Contributes to the building of Methods and Support activities within the Maintenance entity. Carries out CBM vibration surveys on site and issues reports accordingly. Follows up with site to ensure that all actions arising from the CBM Surveys are promptly closed Carries out Lube Oil sampling as per the planning, performs laboratory analysis of the samples as required and issues reports accordingly. Advises site on the outcome of the Lube Oil analysis and the actions required to be carried out to ensure equipment availability. Reviews and advises and follows up on the acceptable process for Lube Oil management on site. Carries out gas leak investigation/surveys on sites and makes estimates of the leakage rates of valves. Also, develops the action plan to close out the leaks on the concerned valves. Assists in vibration analyses and other analyses including all methods related activites as required. Maintains close liaison with the RCM Specialist and Maintenance Discipline Methods Engineers to monitor and follow up actions arising from the results of CBM measurement campaigns. Follows up with site on all the corrective actions recommended following analyses to ensure that they are properly implemented. Visits site whenever the need arises and physically assists to carry out specialized activities following from CBM results (balancing, alignment, rotor axial position adjustment, proximiter gaps setting, etc.…) Issues regular CBM reports as considered necessary to show the health status of big machinery and to highlight pending problems. Takes the ownership on all CBM tools on sites and at base, and acts to ensure their proper usage and safekeeping. Carries out infra-red thermography campaigns on electrical switchboards and ensures the timely execution and report interpretation. Follows up with site on the corrective actions arising therefrom. Follows up the Condition Based Monitoring of electrical motors, collects and reviews data, and liaises with the RCM Specialist and Maintenance Discipline Methods Engineer to engage responsible Contractors for the interpretation of results and recommendation of solutions to equipment issues. Carries out borroscope inspection on turbogenerators when required and issues reports. Follow up SAP Work Orders to ensure proper preparation, close out and reporting on all CBM related actitives on site Assists in any other way considered necessary in his capacity, to support the maintenance team objective to ensure efficient site support and good availability and reliability of rotating equipment. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering, Vibration ISO Cat II Certification, based on the ISO 18436-3 Ability to use sensors and other monitoring equipment to collect data on the performance of equipment (Infrared thermography / Vibration monitoring / Oil analysis / Ultrasonic analysis / Pressure analysis / Electrical analysis) +10 years’ experience minimum in the maintenance field on oil and gas production installations, 5 years experience in Condition Based and Predictive Maintenance Experience in maintenance support and especially in field maintenance capacity Good knowledge or CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...) Good knowledge of planning tools, and of CMIMS tools (preferably SAP based) Fluent in English, knowledge of French & Portuguese language recommended Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45044 - Instrument Specialist* M/F

Thu, 15 Oct 2026 07:59:00 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Ensures that COMPANY's HSE regulations are respected. Ensures the planning, preparation, scheduling, coordination, and execution of preventive and corrective maintenance activities within his area of responsibility, while considering production constraints and ensuring the availability of required resources, materials, and spare parts, Oversees and ensures the effective maintenance, monitoring, troubleshooting, and restoration of Instrumentation and Control Systems, utilities, and equipment under his responsibility to maintain operational reliability and availability. Uses and maintains CMMS data, intervention reports, and inventory information to manage maintenance activities, monitor performance, prepare technical reports, and drive continuous improvement in safety, reliability, equipment preservation, and cost optimization. Coordinates with third-party vendors for troubleshooting, repair, and refurbishment activities, ensures proper feedback following interventions, and identifies opportunities for equipment and installation improvements. Ensures that the transfer of knowledge by mentoring occurs properly within his teams. Carries out, at the COMPANY request, any intervention within his field of competence. Methods Provide support in repair, installation, and commissioning Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance Verifies the quality of his teams’ interventions by frequent on-site checks, Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

The holder of this position must have the following qualifications: Bachelor's Degree in Control & Instrumentation Engineering, Control Systems Engineering, or a related Engineering discipline +15 years’ experience minimum in the maintenance field on oil and gas production installations Good knowledge of Instrumentation and Control Systems (PFD and P&ID diagrams, Instrument list and I/O list, Specifications and data sheets, Valve, relief valve and pressure reducing valve calculations, Layout and routing plans, Assembly standards, Equipment parts lists, Terminal block and BJ plans, Grouping cabinet plans, Control room and technical room layout plans, Loop diagrams, Interconnection diagrams) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Fluent in English, knowledge of French & Portuguese language recommended Strong leadership, reliability and work confidentiality.
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45042 - Mechanical Specialist* M/F

Thu, 15 Oct 2026 07:57:25 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Organizes the mechanical maintenance operations on site, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manage the maintenance all mechanical equipment (Gearboxes, Pumps, Compressors, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters). Troubleshooting and repairing malfunctions in mechanical systems, Air compressors, Gas lift compressor, Water injection systems, Cranes, pumps, etc. Reading and interpreting drawings, blueprints, and schematics. Asset Care routine to ensure PM/CM close-out and Integrity of Asset maintained. Methods Provide support in repair, installation, and commissioning Analyses indicators provided by the CMMS, stock management and intervention reports with a view to improving maintenance in his area (HSE, availability, preservation of equipment, optimization of costs), Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance In addition to audits and reviews as above mentioned he participates in periodic meetings with GMC and SMC to ensure proper surveillance. Also, designs, follows-up and optimizes maintenance concepts in close cooperation with the GMCs and SMCs.

The holder of this position must have the following qualifications: Bachelor Degree in Mechanical Engineering +15 years’ experience minimum in the maintenance field on oil and gas production installations Good knowledge of Gearboxes, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters, Pumps (Centrifugal, Diaphragm, Piston, Gear, Peristaltic, Dosing, Lubrication pumps), Compressors (Piston, Scroll, Screw, Centrifugal, Vane compressors) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Bright 3.5 (or equivalent) Fluent in English, knowledge of French & Portuguese language recommended Strong leadership, reliability and work confidentiality.
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-42449 - Instrumentation Maintenance Method Engineer H/F

Tue, 13 Oct 2026 22:06:55 Z

Type de contrat : Contrat international
Description du poste :
MISSIONS : 1. SAP Data Management & Population Manage asset registers and data templates specifically for instrumentation, including loops, transmitters, and ESD systems. Populate the CMIMS database with technical instrumentation data to ensure robust engineering performance. Define asset data management requirements and participate in the development of instrumentation maintenance guidelines. Prepare, follow-up and update the entire process for “Notification – Work Order and Reporting”. Support spare parts responsible for the material creation in CMIMS. 2. Instrumentation Methods & Reliability Develop and implement maintenance strategies (preventive, predictive, and corrective) for electronic and pneumatic control systems. Conduct FMEA and Root Cause Analysis (RCA) on instrumentation failures to identify recurring issues and implement lasting solutions. Perform the Global Maintenance Plan, specifically focusing on calibration schedules and on-condition monitoring of critical loops. Prepare Maintenance Matrix Plan and Maintenance Work Instruction as part of the Global Maintenance Plan. 3. Engineering & Quality Compliance Produce engineering deliverables according to project contracts and applicable engineering standards. Proactively highlight technical deviations or non-conformance risks to the O&M Package Maintenance Leader. Integrate technical links between general specifications and spare parts deliverables into the CMIMS. Maintain permanent focus on improving maintenance process, updating drawings and P&ID. 4. Team Collaboration & Safety Collaborate with maintenance, operation, HSE and other engineering teams to enhance overall productivity. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract, depending on profile Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas Complete the collection and population of all instrumentation asset data and control loops into the SAP CMIMS by the end of 2026. Produce a comprehensive maintenance plan including calibration schedules and reliability-centered procedures for all plant instrumentation by early of 2027. Ensure the successful execution of database loading and full CMIMS implementation for the 2027–2033 operational phase.

Bachelor’s degree or higher in Instrumentation, Electrical, or related Engineering. English B2 level mandatory Turkish nationality or speaking people is a strong plus Minimum of 3–7 years in maintenance services, with a proven track record in refining, petrochemicals, or PDH-PP processes. Advanced proficiency in SAP/CMMS for asset management and data processing. Strong knowledge of pneumatic systems, diagnostic tools, and SAP/CMMS. Excellent technical reporting and statistical data preparation skills. Ability to work in a multi-cultural environment and under pressure. Effective communication skills for interacting with team members and other departments. Self-motivated with a strong sense of initiative and problem-solving.
Lieu de travail : Adana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42450 - Mechanical Maintenance Method Engineer H/F

Tue, 13 Oct 2026 09:26:35 Z

Type de contrat : Contrat international
Description du poste :
MISSIONS : 1. SAP Data Management & Population Collect and validate mechanical asset registers and data templates for SAP implementation. Populate the CMIMS database with high-fidelity mechanical data, ensuring a strong engineering performance. Perform the global maintenance plan, including lubrication, running, and on-condition plans, and integrate them into the SAP environment. Prepare, follow-up and update the entire process for “Notification – Work Order and Reporting”. Support spare parts responsible for the material creation in CMIMS. 2. Mechanical Methods & Reliability Develop and implement maintenance strategies (preventive, predictive, corrective, condition-based monitoring and oil analysis) to minimize downtime. Conduct RCA and FMEA studies, Risk-based Maintenance, and Reliability-centered Maintenance (RCM) to optimize asset life. Perform the Global Maintenance Plan, including lubrication and on-condition monitoring for high-speed rotating equipment and compressors. Prepare Maintenance Matrix Plan and Maintenance Work Instruction as part of the Global Maintenance Plan. 3. Engineering & Quality Compliance Produce maintenance deliverables according to project contract and scope of work. Vigilantly highlight any technical engineering deviations, non-conformance, or unacceptable risks to the O&M Package Maintenance Leader. Prepare technical reports and statistical data to track maintenance efficiency and database accuracy. Maintain permanent focus on improving maintenance process, updating drawings and P&ID. 4. Team Collaboration & Safety Collaborate with maintenance, operation, HSE and other engineering teams to enhance overall productivity. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract, depending on profile Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas Complete the comprehensive collection and population of mechanical asset data into the SAP CMIMS by the end of 2026. Produce a global maintenance plan including lubrication, running, and on-condition procedures based on RCM and FMEA studies by early of 2027. Ensure the successful execution of database loading and full CMIMS implementation for the 2027–2033 operational phase.

Bachelor’s degree or higher in Mechanical or Industrial Engineering. English B2 level mandatory. Turkish nationality or speaking people is a strong plus. Minimum of 3–7 years in maintenance services, with a proven track record in refining, petrochemicals, or PDH-PP processes. Advanced proficiency in SAP/CMMS for asset management and data processing. Deep understanding of mechanical, electrical, and pneumatic systems in a petrochemical environment. Strong statistical data preparation and technical reporting skills. Ability to work in a multi-cultural environment and under pressure. Effective communication skills for interacting with team members and other departments. Mindset: Self-motivated with a strong sense of initiative and problem-solving.
Lieu de travail : Adana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-44700 - Crane and Lifting Equipment Specialist M/F

Sun, 11 Oct 2026 22:12:38 Z

Type de contrat : Contrat international
Description du poste :
SPIE Global Services Energy is looking for Crane and Lifting Equipment Specialist to join its workforce AKPO project in Nigeria. JOB PURPOSE: This job is created to provide technical and economic leadership in the inspection, maintenance and reliability of cranes and lifting equipment according to safety standards. JOB DIMENSIONS: To ensure cranes and lifting equipment reliability and availability according to safety standards. To ensure operational engineering processes, inspection and maintenance are efficiently carried out in strict compliance with safety policies and procedures on all lifting and marine equipment To ensure crane and lifting equipment support as technical authority to the DW field operations in accordance with Company rules and statutory regulation. To analyse crane maintenance activities and lifting equipment performance from the technical and economic perspective and take action necessary to achieve company set objectives regarding efficiency, cost optimization and savings. To provide Marine lifting equipment support to Maintenance Operations Mechanical Static team when required ACTIVITIES: To prepare all methods support and implementation of practice documents regarding preventative maintenance, inspection, and testing to be performed on AKPO & EGINA cranes and lifting equipment based on recognized best practice and applicable regulations. To prepare and develop specifications for new cranes and lifting equipment based on recognized international standards. Co-ordinate planned crane maintenance activities fleet-wide in conjunction with the Original Equipment Manufacturer (OEM). Manage specialized crane maintenance vendors interventions and contracts (Liebherr, Sparrow, National Oilwell Varco etc.) within SCM frame agreements (including technical scope of work) where applicable. Ensure the implementation and assurance of Company integrity management system compliance. Liaise with classification societies/third party design offices where applicable. Support DW TUPNI asset installations for all related crane issues (specifically for new cranes, specification for upgrades and heavy lift works on cranes). Liaise with crane manufacturers when required. Participate in and/or lead investigations for all crane related incidents across the fleet. Interface with DW INSPECTION Department for all crane related issues. Supervision until completion of 5-years major overhauls in all DW installations cranes (based on Contractor/OEM and CPLO reports). Follow spare parts stocks with Warehouse and Procurement. - In Charge For all cranes: o Review/Produce Maintenance Plan as per Vendor recommendations o Review/Correct/Create corrected BOMs in SAP, establish MRP parameters o Ensure equipment are certified by third parties. For all Hoist Winches: o Review/Produce actual Maintenance Plan o Review/Correct/Create corrected BOMs in SAP, establish MRP parameters

QUALIFICATIONS / EXPERIENCE REQUIRED: - Formal education: B.SC. Mechanical Engineering (2.1). - Professional experience (number of years): 15 years’ experience with: o Technical knowledge and experience in Offshore cranes and hydraulic power transmission and control systems o Proven experience working with heavy machinery/equipment o Extensive experience within maintenance, fault finding, build and procurement of equipment projects - Team management, analytical and organizational skills. - Computer literacy and knowledge of Computerized Maintenance Management System (SAP) is an advantage. - Proficiency in English language.
Lieu de travail : OFFSHORE / AKPO
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-44699 - Head of Mechanical M/F

Sun, 11 Oct 2026 22:12:35 Z

Type de contrat : Contrat international
Description du poste :
SPIE Global Services Energy is looking for Head of Mechanical to join its workforce AKPO project in Nigeria. JOB DIMENSIONS: Production level: during plateau period 114.000 bopd; 9.8 MSm3/D gas (AKPO). 200,000 bopd; 4.6 MSm3/D gas (EGINA) Company staff managed (number of persons) during operations: 6 Contractors staff managed (number of persons) during operations: during campaigns about 10 p offshore Contractors Budget (in Millions USD) Coordinates technically services for about 60 MUSD per year Technology involved in the job: Gas Turbines, Compressors, Diesel Engines, Static Equipment, Pumps, other Mechanical items ACTIVITIES: Responsible for the Technical content of the Maintenance Methods in the field of Mechanical, including the responsibility for maintenance plans, spare parts coverage, working techniques, and the procedures, in accordance with the Maintenance Policy. Revise the maintenance plans prepared by the various Contractors and ensure their proper implementation. Coordinate with the Methods Department the consolidation of the Maintenance Plans. Ensure suitable spare-parts availability/coverage through adequate stock management parameters; initiate the necessary improvements in accordance with the reliability, availability objectives and cost optimization. Perform the duties of Technical Administrator for the Mechanical Spare Parts. Develop and control proper implementation/use of the techniques and tools required for an efficient maintenance, including both technical (condition monitoring, working tools, etc.…) and administrative/reporting aspects (Work reports, data trending, spare parts consumption, etc.…). Responsible to control and ensure the data captured in SAP (UNISUP) are accurate; perform their analysis and propose optimization plans. Ensures proper management of the equipment support means including documentations, tooling, software, etc. Provides technical expertise in view of timely and efficiently address the failures and losses of performance of equipment. Analyse the equipment performances, perform technical studies, provide technical support on any technical queries, and make proposals for improvement and optimization. Perform modification studies as required. Ensure the operations under own authority are prepared and performed in accordance with Company rules, procedures and specifications, and in full compliance with the HSE standards. Responsible for the mobilisation, the coordination, the logistic arrangements, of the external resources (vendors, contractors, means, etc.…) required for the operations in own field of competence (mechanical). Includes initiation of call off, or service order, definition of scope of work, work performance follow-up, control/acceptance of deliverables, and any other duty until satisfactory completion of the required service.·

QUALIFICATIONS / EXPERIENCE REQUIRED: Engineer University Degree in Mechanical Engineering or equivalent. Good Knowledge in Turbo machineries. Minimum 10 years’ experience as Mechanical Engineer including 5 in the Petrochemical industry. Minimum 5 years in supervisory operational position.
Lieu de travail : OFFSHORE / AKPO
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-44695 - Package Coordinator/Turbinist M/F M/F

Sun, 11 Oct 2026 22:12:33 Z

Type de contrat : Durée indéterminée
Description du poste :
SPIE Global Services Energy is currently looking for a Package Coordinator/Turbinist to join its workforce in Nigeria. Key Responsibilities: Operations Organizes on site the maintenance operations which are related to turbo machines by coordinating supervisors. Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS, Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Takes in charge the turbo packages in case of breakdown until correct operation status. Assists operation team in conducting the turbo machines. Methods Identifies recurrent corrective maintenance interventions, analyses them and suggestsimprovements Keeps a critical eye on current preventive maintenance programmes and, if need be,suggests improvements, Warns support teams of any recurring problems related to the availability or quality ofspare parts, Suggests improvements and requests modifications. Monitors the functioning of turbo machines, by following important parameters of the packages, Quality Assurance Verifies the quality of interventions by frequent on-site checks He is responsible for the reliability and integrity of turbo machines Purpose He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR

The holder of this position must have the following qualifications: • Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years. study) or BTS/DUT or equivalent. • 3 to 5 years. experience in the maintenance or operation field on gas turbine, • Specific professional knowledge: • Gas turbine • Gas compressor • Ability to lead and motivate multi-national teams, • Pride in his work, ability to maintain good relations with colleagues and others, • Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : OML99 - Amenam, Port Harcourt
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42733 - Training Leader H/F

Sun, 11 Oct 2026 22:05:26 Z

Type de contrat : Freelance
Description du poste :
MISSIONS : 1. Development of Training Program : Define and implement a comprehensive, structured training program covering: Operations personnel: Utilities & Offsites / PDH Unit / PP Unit Maintenance personnel: Mechanical (static, rotating, piping) / Electrical & Instrumentation (E&I) Establish training matrices aligned with: Job roles and responsibilities Competency requirements Project phases (construction, commissioning, start-up, operation) Integrate: Classroom training / On-the-job training (OJT) Simulator-based training (if applicable) / Vendor/OEM training 2. Trainer Sourcing and Management : Identify, source, and recruit qualified discipline trainers in: Operations (PDH, PP, Utilities) Mechanical and Piping Electrical and Instrumentation HSE (Health, Safety & Environment) Evaluate trainer qualifications and ensure alignment with plant technologies and standards Manage trainer performance and delivery quality 3. Training Material Development : Ensure timely preparation and validation of training modules, including: Operating procedures Maintenance procedures System descriptions Equipment manuals Oversee the development, validation and timely availability of all training materials: Classroom modules / Technical manuals / Simulator-based training (if applicable) / OJT (On-the-Job Training) procedures Assessment tools and certification pathways Standardize training content across disciplines Ensure consistency with: EPC documentation Licensor documentation OEM manuals Implement document control and version management for training materials 4. Coordination with EPC, Licensors and OEMs : Interface with EPC Contractor to: Align training schedule with project milestones Ensure availability of engineering and vendor documentation Coordinate training programs with licensors such as: UOP (PDH technology) LyondellBasell (PP technology) Plan and monitor OEM/vendor training sessions: Site training during installation and commissioning Ensure training deliverables are completed prior to start-up 5. Competency Assessment & Evaluation : Develop and implement a competency assessment framework, including: Written examinations Practical assessments On-the-job evaluations Define competency criteria for each role and discipline Track individual progress and certification status Identify skill gaps and implement corrective training plans Prepare readiness reports for: Commissioning / Start-up Operational handover 6. Integration with HR & Operations : Work closely with HR and recruitment teams to ensure training readiness prior to mobilization Support workforce planning through alignment with the Manpower Loading Plan Interface with technical teams to ensure training reflects real operational needs and equipment specifics

Master’s degree in HR, Training or related field 7–10 years of experience in Training, Competency or Learning & Development roles 7+ years in training management within oil & gas, petrochemical or industrial environments Good understanding of maintenance, operations and HSE standards Experience with LMS tools and training tracking systems Ability to manage training providers and certification processes Fluent in English (B2/C1 minimum) Turkish is a strong advantage Strong leadership, coordination and ability to work in a multicultural environment Proven experience in designing and implementing training strategies and competency frameworks Understanding of industrial maintenance, operations, and HSE standards Experience with Learning Management Systems (LMS) or training tracking tools Strong leadership and coordination skills Excellent communication and stakeholder management Ability to work in a multicultural and fast-paced environment High level of organization and anticipation Problem-solving mindset with strong adaptability CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract depending on profile Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas Expected final project outcome: Fully deployed Training & Competency Framework aligned with operational needs All personnel trained, certified and compliant before start of operations A sustainable training system ensuring long-term operational excellence Full integration of training data into HR and ERP systems
Lieu de travail : Adana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-44999 - Warehouse Supervisor H/F

Fri, 09 Oct 2026 22:18:18 Z

Type de contrat : Contrat international
Description du poste :
MISSIONS : Warehouse Setup & Optimization: Review the warehouse design and layout (zones for consumables, fast movers, hazardous goods, overall dimensions, access gates, lifting equipment, storage and shelving systems, etc.). Define storage requirements for each item category (climate control, shelving, hazardous material handling, etc.). Implement FIFO/LIFO systems, labelling, and barcode tracking as needed. Ensure accurate spare part codification and classification in the CMMS/ERP and on stored items. Stock Control & Inventory Accuracy: Define, implement, and manage inventory control processes (reorder levels, minimum stock alerts, cycle counts). Use appropriate tools and methods to perform regular stock reconciliations, support annual inventory audits, and ensure 100% data accuracy between physical stock and digital records (CMMS/ERP). Develop and utilize interface tools to provide real-time part availability data to maintenance planners. Ensure systematic calibration period and expiry date are not overdue. Tool Management: Maintain and oversee a centralized tool crib or tool control system for the maintenance teams. Track and manage calibration schedules for precision and safety-critical tools. Logistics & Receiving: Develop and implement procedures for incoming goods inspection and conformity checks against POs and specifications. Coordinate with Procurement and QA/QC for handling non-conformities, damage reports, or vendor returns. Compliance & Safety: Ensure all warehouse operations comply with HSE standards and regulations, especially for hazardous materials. Maintain proper documentation and traceability for safety stock, critical spares, and regulated materials. Workshop Setup and Optimisation: Review the workshop design (layout, equipment, safety zones, utilities). Define workshop requirements (working space, layout, tools, equipment, personnels, lifting means, storage means, waste management). Recommend workshop tools and equipment. Ensure workshop activities comply with company and HSE standards (e.g., permits to work, hot work procedures). Develop and implement procedures for the workshop operation. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract depending on profile Working arrangements : Preparation phase: Full remote with missions in Cergy (France) and abroad at contract start for spot missions overseas Phase 2-3: The position will be based in Türkiye on a resident or rotational basis Eligible expatriate assignments with company support for accommodation, travel, local transportation and meals in accordance with applicable company policies. Expected final project outcome: Complete the design, layout optimization, and equipment procurement for all warehouse and workshop facilities. Establish robust logistics, tool calibration, and preservation procedures to support the 2027–2033 operational phase.

Bachelor's degree or higher in Mechanical, or Maintenance, or a related field Minimum 5 years of experience in warehouse/workshop operations within petrochemical or refinery environments. At least 3 years of experience in warehouse/workshop design, setup, or project-based roles. Strong knowledge of storage/logistics tools and fabrication tools. Proficiency in CMIMS systems for parts management and data analysis. Ensure 100% accuracy between physical inventory and digital records through full spare part codification in SAP. Proven experience in managing and tracking inventory to ensure availability. English B2 level mandatory Turkish nationality or speaking people is a strong plus Strong ability to work in a multi-cultural and multidisciplinary environment. Well-organized, detail-oriented, and able to work under pressure. Excellent interpersonal skills and high adaptability in multicultural environments Ability to produce high-quality technical deliverables and reports.
Lieu de travail : Adana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2025-41232 - CONDITIONAL MAINTENANCE (CBM) ENGINEER M/F

Fri, 09 Oct 2026 22:12:22 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity OPERATIONS ✓ Organises vibration, thermograph and oil sampling round. Analyse the results. ✓ Perform pump performances. ✓ Perform turbine and rotating compressor performances (training necessary) ✓ In charge of system 1 for monitoring and analyses. ✓ In charge of conditional maintenance vendors. ✓ Perform the scheduling of the conditional maintenance operations. ✓ Initiate and follow intervention using UNISUP. ✓ Assist GIRASSOL/DALIA for rotating equipment punctual diagnosis, and initial point after standard exchange, ✓ Takes part in daily, weekly and co-ordination meetings on site, when needed. METHODS ✓ Keeps a critical eye on current preventive maintenance programmes and proposes improvements. ✓ Warns supports teams of recurring problems related to the availability or quality of spare parts. ✓ Keeps track of any backlog of work in his area of responsibility and suggests corrective measure if this backlog threatens becomes unmanageable. ✓ Prepare, adapt and modify Conditional Maintenance booklet, ✓ Edit monthly conditional maintenance report for the FPSO, including vibrations analysis, oil sampling results, pumps performances. ✓ Follow the organizations, proposals and material in the frame of new projects. QUALITY ASSURANCE ✓ Monitors the actions taken concerning analysis of vibration, lubricant analysis and performance monitoring until their correction. ✓ Is responsible for the implementation of the approved operating instructions and current industry practices when performing interventions under its control, thus ensuring the quality of maintenance. ✓ Monitors the status and quantity of available tools and, if necessary, request replacement or purchase. ✓ Offers improvements in procedures. CONTEXT AND ENVIRONMENT ✓ Rotation status ✓ Position on shore with frequent missions offshore

PURPOSE ✓ Ensures the preparation and planning of the conditional maintenance; organising vibration, thermograph, oil sampling rounds ✓ Analyses the results, providing assistance to CONTRACTOR and to the Specific Maintenance Contracts (SMC) ✓ Ensures that maintenance operations are prepared in strict accordance with COMPANY’s current safety rules and operating procedures. ✓ Trains offshore assistant personnel as required. JOB REQUIREMENTS ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ Proven experience on conditional base maintenance and vibration monitoring equipments. ✓ 3 to 5 years’ experience in the maintenance field on oil and gas production installations, ✓ SAP/R3 experience and know-how ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent)
Lieu de travail : Angola luanda
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-44292 - Recovery and Sustanability Superintendent M/F

Fri, 09 Oct 2026 22:09:36 Z

Type de contrat : Durée déterminée
Description du poste :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a : Recovery & Sustainability Superintendent Job Purpose Ensure safe and efficient execution of Recovery & Sustainability (R&S) campaigns and shutdown activities. Coordinate planning, preparation, execution, and closeout activities to minimize downtime, maintain production reliability, and achieve project objectives. Key Responsibilities Lead and coordinate R&S campaign and shutdown activities offshore. Ensure compliance with company HSE standards and an incident-free culture. Support the Offshore Installation Manager (OIM) in developing execution plans and setting work priorities. Coordinate preparation of work packs, inspections, repairs, isolations, and spading activities. Monitor campaign readiness and maintain action trackers with onshore teams. Manage contractor resources to ensure safe and timely execution of work. Review work progress, provide daily reports, and participate in coordination meetings. Ensure materials, equipment, consumables, and spare parts are available before execution. Coordinate service orders and contractor mobilization with onshore teams. Compile campaign data, prepare closeout reports, and capture lessons learned. Support risk assessments and continuous improvement initiatives to optimize maintenance downtime.

Bachelor's Degree in Mechanical Engineering or equivalent. Experience in Oil & Gas operations, shutdowns, campaigns, or maintenance activities. Good knowledge of Mechanical & Piping Construction. Familiarity with Shutdown/Campaign Management processes. Basic knowledge of Primavera P6 and/or MS Project. Good working knowledge of SAP CMMS. Strong planning, organizational, leadership, and communication skills. Ability to work effectively in a multicultural environment. Fluent in English (spoken and written). Proficient in Microsoft Office applications. Self-motivated and able to work with minimal supervision. Preferred Experience Offshore Oil & Gas experience. Experience coordinating contractors and multidisciplinary maintenance teams. Background in pressure vessel inspections, maintenance, and shutdown execution. SPIE Global Services Energy is committed to promote diversity. This position is opened to people with disabilities We offer long-term contract with attractive daily rate, insurance coverage, transportation & expat standard accommodationYou will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office
Lieu de travail : Doha, Qatar
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle