RSS export of vacancies - Seulement les offres à la une : No / Zone géographique : Afrique, Moyen-Orient/Afrique du Nord

2026-43929 - Lead Project Controls & NC Reporting Engineer *(M/F) M/F

Tue, 30 Jun 2026 09:50:33 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for Lead Project Controls & NC Reporting Engineer to join its work force in Nigeria. JOB PURPOSE The Lead Project Controls & NC Reporting Engineer supports the Project Management Team in the delivery of the Project through to operations, with primary accountability for NC reporting, cost and schedule control, change management and contractual matters. The role will ensure compliance with contractual T&Cs for the 2 packages and management of variations and claims, as well as accurate cost and schedule reporting. He will contribute to a safe execution with no major H3SE incidents and supporting start-up and operations no later than Q4 2027. Responsibilities include: ACTIVITIES Project Controls, Documentation & Reporting Ensure proper implementation of project control standards, including cost, schedule, and change control reporting. Coordinate with the DCC function to ensure accurate documentation management and preparation of execution, monthly, and management reports with appropriate quality and consistency. Planning & Scheduling Control Develop, maintain, and control the package execution schedule, monitor progress against the baseline, identify critical paths and deviations, and support the Package Manager with mitigation measures and recovery actions where required. Cost Control & Budget Management In close coordination with Finance/Cost Control, supervise cost monitoring, commitment tracking, forecasting, and budget performance for the WHP package. Ensure early identification and proper justification of cost deviations and change impacts. Change & Variation Management Consolidate, assess, and document all technical, schedule, and commercial changes, ensuring compliance with TotalEnergies change management processes. Advise the Package Manager on the cost and schedule implications of changes and support negotiations where required. Contractual & Commercial Support Provide contractual and commercial advice to the Package Manager, including assessment of Contractor positions, review of estimates, and support for SMRs, variations, and claims resolution, ensuring robust justification and documentation. Monitor and control project performance including: a. Cost => at any time be able to provide EFC b. Planning => at any time have an updated P50 planning and a good understanding of P10 and P90 c. Identify any deviation in cost and schedule and make proposals/implement to corrective actions. Nigerian Content Compliance and Reporting Monitor and ensure compliance with Nigerian Content requirements applicable to the Adiana Project including reporting obligations, coordination with relevant stakeholders, and consolidation of Nigerian Content performance data. Interact with MCDMB to ensure successful project outcomes Stakeholder Management. Monitor and maintain good relationships with Partners and Authorities and ensure efficient coordination between EPC contractors.

ACCOUNTABILITIES Budget Control Support- Monitor and control commitments, forecasts and trends and escalate to PCM Schedule Control Support- Monitor and control schedule, critical path and trend analysis, flag deviations with potential impact on other packages or first gas Project Leadership- Coordinate effective workload management and application of controls for team Invoice & Progress Validation- Review and validate all reports, progress statements, and contractual documentation supporting invoices, ensuring alignment with actual progress, contract terms, and approved changes prior to Package Manager endorsement. Contract Administration & Change Control- handling of claims, risks and formal correspondence NC Reporting activities. QUALIFICATIONS/EXPERIENCE REQUIRED Project Controls (Cost, Schedule & Risk Mgt) Knowledge of Company referential Contract Administration & Change Mgt Project management (organization) External stakeholder Management / political sense Negotiation Team management (relationship) (Contract) Writing Professional Experience (number of years): 15 Experience within project and project Control and contract administration: (number of years): 10
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-43907 - Security & Logistics Coordinator *(M/F) M/F

Mon, 29 Jun 2026 22:27:10 Z

Contract type : Temporary work contract
Position description :
SPIE Global Services Energy is looking for Security & Logistics Coordinator to join its workforce in Nigeria. JOB PURPOSE Support the IMA Project in achieving security objectives by providing technical and operational expertise in security operations and administration, facilitate the project operations by ensuring Land transportation of company personnel, partners and other stakeholders. Responsibilities shall include: Advise on security matters across all phases of IMA project development. Coordinate and supervise the project site security team. Conduct security risk and vulnerability assessments; implement security strategies. Contribute to the preparation of Logistics and security budgets / Bills of Quantities (BoQs). Drive innovation and continuous improvement in security practices. Prepare and maintain security documentation; provide up-to-date security guidance to project personnel. Review contractors’ security plans and develop bridging documents for shared responsibilities. Deliver security inductions for personnel and Government Security Forces (GSF). Identify and address international and national security requirements affecting the project. Audit and review company and contractor security activities, equipment, and sites. Follow up on security audit recommendations and facilitate security drills. Ensures provision of land transportation for movement of company personnel and goods from one place to another purposely for the project Ensures all land transportation for the project is operated in conformity with the Company LTMS and HSE/Driving Policy Ensures the daily management of drivers to maintain cordial industrial harmony in the company. Timely preparation of drivers’ monthly HSE meeting in liaison with the FM&A team, safety training, leave schedules and monitor implementation. Oversees the Supply, Installation, Maintenance of IVMS (In-Vehicle Monitoring System) and /or Driving Improvement & Monitoring System (DIMS) and Monthly downloaded IVMS/DIMS report follow up Carries out detailed investigation of road transport incidents in conjunction with relevant FM&A Transport QA/QC Officer, HSE department and keeps records of accidents Prepares activity report on land transport and makes recommendations to the Manager, Travels Management on land transport matters. Liaise with the site security team to plan and execute security exercises.

Ensure compliance with all TotalEnergies Affiliate and Project security policies, with particular attention to the Company Security Management System Monitor and controls transport operations for the project to ensure safety of personnel lives, other road users and goods Constant education and training of project drivers towards safe and defensive driving behaviour as well as accountable for sanctions policy implementation Manages the Supply, Installation and Maintenance of DIMS and/or IVMS for the project fleet.
Location : Port Harcourt, Nigeria
Language / Level :
English : D-Full professional proficiency

2026-43872 - Gas Turbine Specialist Engineer M/F

Mon, 29 Jun 2026 22:26:21 Z

Contract type : International Contract
Position description :
SPIE Global Services Energy is currently looking for a Gas Turbine Specialist Engineer to join its work force in Angola. Key Responsibilities: Review the gas turbine maintenance strategy, annual plan, operating hour-based requirements, inspection forecasts, major maintenance windows, and long-lead intervention needs. Prepare detailed work packs and readiness plans for gas turbine inspections, borescope inspections, hot section inspections, combustion inspections, package maintenance, component change-outs, and major maintenance events. Define task sequence, hold points, critical path, manpower, duration, tools, lifting requirements, access needs, isolations, preservation, testing, start-up, performance checks, and recommissioning requirements. Identify and validate OEM parts, exchange components, consumables, filters, seals, gaskets, lubricants, instrumentation items, special tools, test equipment, lifting accessories, and preservation materials. Coordinate OEM/vendor technical clarifications, service bulletins, intervention procedures, field service requirements, mobilization documentation, offshore certifications, and execution prerequisites. Follow up PRs, POs, long-lead parts, repair/exchange logistics, vendor mobilization readiness, shipment readiness, and interface constraints affecting gas turbine campaigns. Support warehouse verification, preservation control, segregation, bagging, tagging, boxing, packing list preparation, and shipment readiness for gas turbine materials and special tools. Interface with rotating equipment, mechanical, electrical, instrumentation, operations, reliability, HSE, procurement, logistics, marine, OEMs, and offshore teams to integrate gas turbine scopes into FPSO execution plans. Support offshore execution by monitoring progress, resolving technical issues, assessing deviations, reviewing vendor reports, tracking findings, and converting recommendations into actionable work orders or material requests. Gas turbine maintenance preparation dossiers, OEM readiness trackers, major intervention work packs, special tool and spare parts matrices, long-lead procurement trackers, mobilization readiness checklists, execution support reports, vendor report follow-up registers, and post-intervention action trackers.

Engineering degree or equivalent senior technical qualification in mechanical, rotating equipment, turbomachinery, or related discipline, with demonstrable experience in gas turbine maintenance planning and major interventions in oil and gas, preferably FPSO or offshore environments. Experience with OEM-supported gas turbine maintenance, such as Solar or Baker Hughes/GE packages or equivalent, is strongly preferred.
Location : Luanda
Language / Level :
English : C-Professional working proficiency

2026-43868 - Mechanical Maintenance Planning Engineer M/F

Mon, 29 Jun 2026 22:26:12 Z

Contract type : International Contract
Position description :
SPIE Global Services Energy is currently looking for a Mechanical Maintenance Planning Engineer to join its work force in Angola. Review annual, monthly, and look-ahead mechanical maintenance plans and identify work orders requiring detailed preparation, material readiness, vendor support, access, lifting, isolation, or logistics coordination. Create, update, and enrich mechanical work orders in the CMMS/ERP system, including task sequence, manpower, duration, tools, spare parts, consumables, lifting needs, permit considerations, reinstatement steps, testing requirements, and close-out criteria. Prepare work packs for pumps, valves, PSVs, heat exchangers, cranes, static equipment, hydraulic systems, utilities, marine mechanical equipment, and associated mechanical packages. Identify, validate, and map spare parts, consumables, gaskets, seals, fasteners, lubricants, repair kits, special tools, and hand tools required for mechanical scopes. Support material master creation and BOM improvement by providing accurate technical descriptions, OEM references, manufacturer details, storage requirements, and equipment linkage. Follow up PRs, POs, technical clarifications, vendor quotations, expediting actions, warehouse availability, and material shortages that may affect mechanical work execution. Conduct warehouse verification, bagging, tagging, boxing, preservation checks, packing list preparation, and shipment readiness for mechanical materials and tools. Interface with maintenance, operations, reliability, warehouse, logistics, procurement, HSE, marine, vendors, and offshore supervisors to align mechanical work readiness and execution methodology. Support offshore execution by resolving technical queries, monitoring progress, assessing changes, capturing lessons learned, and converting accepted findings into new work orders or material requests.

Engineering degree or equivalent technical qualification in mechanical engineering, with proven offshore oil and gas or FPSO maintenance planning experience. The candidate shall demonstrate strong knowledge of CMMS/ERP systems, mechanical equipment maintenance, work pack preparation, spare parts identification, vendor coordination, HSE requirements, and offshore logistics constraints.
Location : Luanda
Language / Level :
English : C-Professional working proficiency

2026-43867 - Compressor Specialist Engineer M/F

Mon, 29 Jun 2026 22:26:11 Z

Contract type : International Contract
Position description :
SPIE Global Services Energy is currently looking for a Compressor Specialist Engineer to join its work force in Angola. Key Responsibilities: Review compressor maintenance strategies, equipment history, operating hour requirements, reliability findings, annual plans, backlog, and campaign requirements to identify preparation needs and execution risks. Prepare detailed work packs and readiness plans for centrifugal, reciprocating, screw, or package compressors as applicable, including inspections, overhauls, seal replacements, valve works, lubrication systems, coolers, auxiliaries, and control-related interfaces. Define task sequence, manpower, duration, special tools, lifting requirements, isolation requirements, access needs, alignment checks, preservation, testing, leak checks, functional testing, recommissioning, and close-out requirements. Identify and validate OEM spare parts, seal kits, bearings, filters, gaskets, lubricants, valves, instrumentation items, repair kits, special tools, test equipment, lifting accessories, and consumables required for compressor scopes. Coordinate vendor/OEM technical clarifications, field service requirements, intervention procedures, service reports, repair recommendations, mobilization documentation, and offshore readiness prerequisites. Follow up PRs, POs, long-lead items, repair/exchange logistics, vendor mobilization, workshop interfaces, warehouse readiness, and shipment preparation for compressor interventions. Support warehouse verification, preservation checks, segregation, bagging, tagging, boxing, packing lists, and shipment readiness for compressor materials, components, and tools. Interface with rotating equipment, mechanical, electrical, instrumentation, operations, reliability, HSE, procurement, logistics, marine, OEMs, and offshore teams to ensure compressor scopes are fully integrated into campaign and routine execution plans. Support offshore execution by monitoring progress, resolving technical issues, assessing deviation impacts, reviewing vendor reports, tracking findings, and creating follow-up work orders or material requests from accepted recommendations. Compressor maintenance preparation dossiers, compressor work packs, OEM readiness trackers, spare parts and special tool matrices, long-lead procurement trackers, mobilization readiness checklists, execution support reports, vendor report follow-up registers, and post-intervention action trackers.

Engineering degree or equivalent senior technical qualification in mechanical, rotating equipment, turbomachinery, or related discipline, with demonstrable experience in compressor maintenance planning, troubleshooting support, and major interventions in oil and gas, preferably FPSO or offshore environments. Experience with OEM-supported compressor packages, including Baker Hughes/GE, Solar, MAN, Dresser-Rand, or equivalent equipment, is strongly preferred.
Location : Luanda
Language / Level :
English : C-Professional working proficiency

2026-43866 - Instrumentation and Control Maintenance Planning Engineer M/F

Mon, 29 Jun 2026 22:26:06 Z

Contract type : International Contract
Position description :
SPIE Global Services Energy is currently looking for an Instrumentation and Control Maintenance Planning Engineer to join its work force in Angola. Key Responsibilities: Review instrumentation and control maintenance plans, calibration programs, campaign scopes, corrective work orders, safety system tasks, and statutory or compliance-related inspections. Create and update instrumentation and control work orders in the CMMS/ERP system, including detailed task steps, calibration requirements, loop checks, function tests, isolation needs, manpower, duration, tools, test equipment, spares, acceptance criteria, and close-out documentation. Prepare work packs for field instruments, control valves, transmitters, analyzers, vibration monitoring systems, fire and gas systems, ESD systems, PLCs, DCS/ICSS interfaces, safeguarding systems, package controls, and associated instrumentation equipment. Identify spare parts, consumables, calibration gases, tubing, fittings, impulse lines, instrument cables, glands, test equipment, communication devices, repair kits, and special tools required for each scope. Support material master creation and BOM improvement for instrumentation and control items, including technical description quality, OEM references, hazardous area classification, calibration requirements, and equipment linkage. Follow up PRs, POs, vendor clarifications, service requirements, calibration certificates, test equipment validity, and documentation required for offshore mobilization. Coordinate warehouse verification, preservation checks, segregation, bagging, tagging, boxing, packing lists, and shipment readiness for instrumentation materials, test equipment, and tools. Interface with operations, ICSS/control specialists, maintenance supervisors, HSE, procurement, warehouse, logistics, vendors, OEMs, and offshore focal points to ensure integrated planning and safe execution. Support execution by reviewing daily progress, resolving technical queries, tracking findings, converting accepted recommendations into work orders, and improving future maintenance plans. Instrumentation and control work packs, CMMS/ERP updates, calibration and test equipment readiness trackers, spare parts lists, material registration inputs, PR/PO follow-up inputs, warehouse verification records, packing lists, execution support reports, and close-out action trackers.

Engineering degree or equivalent technical qualification in instrumentation, control, automation, or electrical and instrumentation engineering, with proven offshore oil and gas or FPSO experience. The candidate shall demonstrate knowledge of CMMS/ERP systems, calibration management, process instrumentation, control systems, safety systems, hazardous area equipment, vendor coordination, and offshore maintenance readiness.
Location : Luanda
Language / Level :
English : C-Professional working proficiency

2026-43865 - Electrical Maintenance Planning Engineer M/F

Mon, 29 Jun 2026 22:26:03 Z

Contract type : International Contract
Position description :
SPIE Global Services Energy is currently looking for an Electrical Maintenance Planning Engineer to join its work force in Angola. Key Responsibility: Review electrical maintenance plans, backlog, statutory inspections, campaign scopes, and corrective work orders to identify activities requiring detailed planning and advance readiness. Prepare and update electrical work orders in the CMMS/ERP system, including task steps, electrical isolations, lockout/tagout considerations, manpower, duration, tools, test equipment, consumables, spare parts, acceptance criteria, and close-out requirements. Develop work packs for generators, switchboards, MCCs, UPS systems, battery systems, transformers, motors, lighting, electrical distribution, heat tracing, Ex equipment, package electrical systems, and associated auxiliaries. Identify and validate electrical spare parts, consumables, fuses, breakers, cables, glands, terminals, relays, meters, batteries, test equipment, calibration requirements, and special tools. Support material master registration and BOM improvement for electrical equipment, ensuring clear technical descriptions, OEM references, ratings, hazardous area requirements, and equipment linkage. Follow up procurement, technical clarifications, PR/PO status, vendor documentation, inspection requirements, and certification needs for electrical materials and services. Coordinate warehouse verification, preservation checks, segregation, bagging, tagging, boxing, packing lists, and shipment readiness for electrical materials and tools. Interface with operations, electrical supervisors, HSE, procurement, warehouse, logistics, vendors, OEMs, and offshore focal points to ensure execution readiness and safe electrical work preparation. Support execution reporting, technical query resolution, findings review, punch-list closure, and creation of follow-up work orders arising from electrical inspections or maintenance activities. Electrical work packs, CMMS/ERP updates, electrical material and certification trackers, spare parts lists, PR/PO follow-up inputs, warehouse verification records, packing lists, execution support reports, and close-out actions from electrical findings.

Engineering degree or equivalent technical qualification in electrical engineering, with proven experience in offshore oil and gas or FPSO electrical maintenance planning. The candidate shall be familiar with CMMS/ERP systems, electrical safety, hazardous area equipment, maintenance planning, material identification, certification control, vendor coordination, and offshore execution requirements.
Location : Luanda
Language / Level :
English : C-Professional working proficiency

2026-43849 - Mechanical Supervisor M/F

Mon, 29 Jun 2026 22:25:37 Z

Contract type : Temporary work contract
Position description :
SPIE Global Services Energy is currently looking for a Mechanical Supervisor to join its work force in Angola. Key Responsibilities: HSE Ensures HSE policy fulfillment during his activities Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); Performs the updating of technical documentation; Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause Failure Analyses, Process Incidents audits and other activities as required; Operates in conformity with mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, and OSHA); Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out; Participate to safety talk before and after intervention Participates to key procedure audits in proactive manner; Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations Organizes on site the maintenance operations which are placed under his responsibility, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of utilities and equipment placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status.

Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 5 to 10 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ Specific professional knowledge: SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have a proven sense of responsibility
Location : DALIA FPSO
Language / Level :
English : C-Professional working proficiency
Language / Level :
French : B-Limited working proficiency

2026-43835 - Static Mechanical Engineer M/F

Mon, 29 Jun 2026 22:25:18 Z

Contract type : Temporary work contract
Position description :
We currently have an opportunity within SPIE Global Services Energy, Qatar for a Static Mechanical Engineer The Static Mechanical Engineer is responsible for providing high-level technical expertise, design validation, asset integrity management, and engineering support for all static (stationary) equipment and piping systems within the manufacturing facility. This role focuses on maximizing plant reliability, leading execution strategies during major turnarounds, ensuring structural compliance with international design codes, and mitigating risk across high-pressure, corrosive process loops. Key Responsibilities Engineering Design & Modification Review and approve design calculations, data sheets, drawings, and technical specifications for modifications or new procurement of pressure vessels, heat exchangers, and tanks. Generate and review Piping & Instrumentation Diagrams (P&IDs), Piping Material Specifications (PMS), and Material Take-Offs (MTOs) to meet international standards (e.g., ASME, ANSI, API). Develop and review plot plans, equipment layouts and 3D models. Route critical process, utility, and offsite pipelines. Stress Analysis: Perform piping flexibility and stress analysis to ensure systems can withstand high pressures, extreme temperatures, and vibrations. Execute plant modifications via the formal Management of Change (MOC) protocol, ensuring no compromise to process safety or plant design basis. Prepare and approve technical deliverables for replacement projects, including scope of work, technical bid evaluations (TBE), and vendor drawing reviews. Turnaround & Maintenance Support Define the technical scope for critical static equipment during scheduled plant shutdowns, turnarounds, and outages. Develop inspection and repair procedures for specialized high-pressure equipment, including shell-and-tube heat exchangers, reformer tubes, and atmospheric storage tanks. Supervise critical repair activities on-site, ensuring field welding, post-weld heat treatment (PWHT), and non-destructive testing (NDT) comply with structural codes. Asset Integrity & Plant Reliability Support Support Fitness-for-Service (FFS) evaluations and remaining-life assessments for older or degraded stationary equipment Support root cause analysis (RCA) on mechanical static equipment failures, structural leaks, and chronic piping vibrating issues to implement definitive corrective actions.

Bachelor’s degree in mechanical engineering from a recognized, accredited university Minimum 5 years of post-graduate experience in mechanical engineering within a heavy continuous-process chemical plant, petrochemical facility, or refinery environment. Experience in the fertilizer industry (specifically Ammonia, Urea, or Nitrates manufacturing units) is strongly preferred. Proven track record of managing massive capital equipment replacement projects and participating in large-scale plant turnarounds. Language: Must possess excellent fluent English communication skills (both written and verbal) to draft technical engineering reports, lead meetings, and coordinate with international vendors Technical Software & Industrial Codes Software Competency: Advanced proficiency in PV Elite (pressure vessel design), CAESAR II (piping stress analysis) and NozzlePRO. Codes & Standards: Comprehensive working command of ASME Section VIII Div 1 & 2 (Pressure Vessels), ASME B31.3 (Process Piping), API 650/620 (Storage Tanks), and TEMA Standards (Heat Exchangers). Core Competencies Exceptional diagnostic, analytical, and troubleshooting capabilities for complex process plant problems. Clear leadership attributes with experience supervising external multi-disciplinary EPC contractors and vendor engineers.
Location : Messaid , Qatar
Language / Level :
English : C-Professional working proficiency

2026-43824 - Surf Project Control Lead & Contract Engineer (M/F) M/F

Mon, 29 Jun 2026 22:25:11 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for Surf Project Control Lead & Contract Engineer to join its work force in Nigeria. JOB PURPOSE Following Contract award and FID, the Project Control Lead & Contract Engineer supports the Onshore Package Manager in the delivery of the EPCC contract from award to operations, with primary accountability for contract administration, cost control, schedule control, change management, and risk management. The role ensures rigorous compliance with contractual terms, proactive identification and management of variations and claims, and accurate cost and schedule reporting, with the objective of delivering the Project within the approved budget and schedule, contributing to a safe execution with no major H3SE incidents, and supporting start-up and operations no later than Q4 2028 ACTIVITIES Contract Administration & Governance Coordinate and supervise the administration of the EPCC contract(s) for the IMA Onshore Packages (BNAG and Onshore Pipeline) package in full compliance with TotalEnergies procedures, including contract implementation, correspondence management, variation control, claims assessment, and contract close-out. Project Controls, Documentation & Reporting Ensure proper implementation of project control standards, including cost, schedule, and change control reporting. Coordinate with the DCC function to ensure accurate documentation management and preparation of execution, monthly, and management reports with appropriate quality and consistency. Planning & Scheduling Control Develop, maintain, and control the package execution schedule, monitor progress against the baseline, identify critical paths and deviations, and support the Package Manager with mitigation measures and recovery actions where required. Cost Control & Budget Management In close coordination with Finance/Cost Control, supervise cost monitoring, commitment tracking, forecasting, and budget performance for the WHP package. Ensure early identification and proper justification of cost deviations and change impacts. Change & Variation Management Consolidate, assess, and document all technical, schedule, and commercial changes, ensuring compliance with TotalEnergies change management processes. Advise the Package Manager on the cost and schedule implications of changes and support negotiations where required. Contractual & Commercial Support Provide contractual and commercial advice to the Package Manager, including assessment of Contractor positions, review of estimates, and support for SMRs, variations, and claims resolution, ensuring robust justification and documentation. Monitor and control project performance including: a. Cost => at any time be able to provide EFC b. Planning => at any time have an updated P50 planning and a good understanding of P10 and P90 c. identifies any deviation in cost and schedule and make proposals/implement to corrective actions. Nigerian Content compliance

QUALIFICATIONS/EXPERIENCE REQUIRED Project Controls (Cost, Schedule & Risk Mgt) Contract Administration & Change Mgt External stakeholder Mgt / political sense Negotiation
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-43817 - Maintenance Technician - Rotating Equipment M/F M/F

Mon, 29 Jun 2026 22:25:05 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Doha, Qatar for a : Maintenance Technician - Rotating Equipment Job Purpose: Act as a Permit Performing Authority to ensure that all works are carried out in accordance with the Permit to Work process and company requirements. Provide the Mechanical Supervisor with analysis and comment on maintenance opportunities and risks in order to improve business performance. Provide visible leadership to personnel to ensure maintenance targets are met. Promote NOC core values by being a safety role model, showing trust, respect and commitment, fostering collaboration across the organization. Promote cost consciousness in order to embed a strong cost culture. Drive an incident free environment by establishing and maintaining a strong incident free culture. Actively participates in and promotes company health and safety campaigns, policies and procedures, that ensures personal safety and that of colleagues at all times. Ensure compliance with Operating Procedures and Guidelines to ensure Process Safety, Operational Safety and Plant Integrity. Carry out repairs to mechanical equipment and perform preventatve maintenance. Contribute to identifying improvements in planned maintenance routines. Prepare, isolate and make safe Mechanical equipment for maintenance.

Ideally, you will have graduated with minimum Higher Secondary School Education plus a three-year technical diploma (HNC, HND or equivalent). Relevant Work Experience: Minimum of 10 years of experience with at least 5 years offshore level on-field equipment in diversified oil & gas processing or petrochemical plants. You are fluent in English with both written and verbal communication You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-43801 - Senior Instrument/Metering Technician M/F

Mon, 29 Jun 2026 22:24:46 Z

Contract type : Permanent contract
Position description :
Organizes and performs on site the maintenance operations which are placed under his responsibility, with his teams assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY's HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility Ensures that all maintenance and repairs to plant and equipment are carried out in a safe and efficient manner and in strict compliance with company operating procedures and any relevant statutory legislation in order to maintain all such equipment in sound and safe operating condition. Manages intervention reporting using the CMIMS, Enters intervention reports in the CMIMS (including those concerning SMC) and writes the technical reports related to his field, Monitors the functioning of systems placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manages the team of technicians directly under his responsibility, Carries out, at the CSR request, any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status is resumed. METHODS Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Ensures adequate risk assessments and pre-work meetings for all activities and that all technicians directly under his responsibility contribute and comply with the risk assessments and pre-work meetings. Ensures adequate PPE and procedures are provided or generated for the tasks to be actioned. Actions numerous site checks to ensure safe working practices. QUALITY ASSUARANCE Verifies the quality of his teams' interventions by frequent on-site checks, and reviews all completed worksites to ensure technical correctness and site cleanliness prior to hand-back of plant to Production team. Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suaaests corrective measures.

BEng or Equivalent with necessary experience. 8 years' experience maintaining oil and gas installations. Thorough knowledge of the equipment used in the treatment of oil and gas. Hands on knowledge of custody transfer systems. Proficiency in operating small provers. Direct hands on experience with OEM flow computers.
Location : Offshore from Port Harcourt
Language / Level :
English : D-Full professional proficiency

2026-42236 - Instrument / Analyzer Commissioning Specialist M/F

Mon, 29 Jun 2026 22:24:40 Z

Contract type : Fixed-term-contract
Position description :
Basic Functions: The basic function of the Commissioning Instrumentation / Analyzer Specialist is to ensure that all pre-commissioning and commissioning activities for the Instrumentation / Analyzer discipline are prepared and executed according to the OPERCOM® methodology in a safe manner and according to the planned schedule. Main Accountabilities: The main accountabilities include ensuring that HSE is given the highest priority, coordinating and approving the quality and completeness of deliverables, assisting Commissioning Unit leaders in witnessing and monitoring pre-commissioning and commissioning activities, reviewing precommissioning dossiers, and monitoring all Instrument / Analyzer Commissioning activities.

Qualifications: The qualifications for this position include an engineer level or above education, high knowledge of instrumentation / analyzer activities within the Oil and Gas refinery, a minimum of 10 years of experience in a similar position, and specific skills such as knowledge of Management of EPCC contracts and OPERCOM® and ICAPS©. Additionally, the candidate should be methodic, organized, have a good team spirit, and be fluent in English, with Arabic being a plus.
Location : Jubail
Language / Level :
English : D-Full professional proficiency

2026-43408 - Internal Communication Officer *(M/F) M/F

Mon, 29 Jun 2026 22:17:26 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for Internal Communication Officer to join its work force in Nigeria. See Job description below SERVICE OBJECTIVE A. Internal Communication Delivery Support the implementation of approved internal communication plans across the organization. Gather, validate, and synthesize information from departments, assets, and functions for internal dissemination. Ensure that all communication outputs align with corporate communication standards, branding guidelines, and local regulatory requirements. Support effective cascading of key messages and corporate priorities across all staff groups and locations. B. Content Creation and Editorial Support Write, edit, and publish high-quality content for internal digital and print platforms including intranet, Viva Engage, OneCom Nigeria, Focus Nigeria, TUPNEWS, Bridgers Magazine, and internal newsletters. Produce a minimum of one hundred (100) internal stories annually. Conduct interviews with managers, functional leads, and employees to support editorial content. Participate in editorial meetings and manage assigned content from initial briefing through drafting, review, approval, and publication. Contribute content to special publications such as Focus Nigeria, Partnership Magazine, and CSR or corporate reports. C. Event Coverage and Reporting Provide internal communication coverage of events including management visits, asset activities, safety campaigns, and community engagements. Produce post-event reports, feature articles, photo stories, and summaries for use across internal communication channels. Support coverage of selected external events where required. D. Leadership Communication Support Assist in the preparation and drafting of speeches, talking points, presentations, and internal messages for leadership as directed. Maintain accurate records, archives, and repositories of approved and validated communication materials. E. Digital and Multimedia Communication Support regular updates and content management on intranet and Viva Engage platforms. Develop basic visual and multimedia communication materials including infographics, photo stories, and campaign assets to support internal communication initiatives. F. Stakeholder Coordination Liaise with departments, assets, and functional teams to source information and confirm accuracy of content prior to publication. Act as a communication liaison to support information flow and collaboration across teams, locations, and hierarchies.

G. Crisis and Sensitive Communication Support Support internal communication during incidents and emergency situations. Apply approved crisis communication protocols with speed, accuracy, discretion, and sensitivity. Ensure strict adherence to instructions and approval processes in high-risk or regulated situations. H. Monitoring, Reporting, and Continuous Improvement Track readership, engagement, and feedback metrics across digital communication platforms.
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-43315 - Planning & Reporting Engineer* M/F

Mon, 29 Jun 2026 22:16:47 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for Planning & Reporting Engineer to join its work force in Nigeria. Activities to perform: Build TEPNG Project Management System Propose appropriate work breakdown structure for each project that is appropriate and standardization and consolidation of reporting, streamlining reporting routines. Support the CMS (to be followed by PPM) by identifying all associated planning projects (trackers) & reporting (dashboards), estimation (benchmarks) generic documents, templates, forms standardizing method and improving quality and efficiency, in line with head quarter procedures and guidelines. Support the updating of annual PPM schedule, project L 0 & 1 related to the COMEX file, follow up on the SRA for these files and PR2 /3 and 4 review related to schedule and reporting follows up and simplifies processes between projects and other entities, clarifying responsibilities and involvements. Control the portfolio Manage the Work Time Schedule in relation to the Exhibit C for each package and integrate other services such as drilling and OPS.to consolidate the various project schedules & reports into various key schedule /milestone and manning levels for each activity for the PPM activities. Monitor implementation of the work breakdown structure, Schedule, progress measurement and reporting procedures, using appropriate tools. Developing and maintaining schedules at project level, with analysis of critical path and potential clashes and proposal of remedial actions/solutions. Ensuring availability at all times of an updated and accurate scheduling and progress measurement documentation. Ensuring reporting at Project level (issue of Weekly reports, Monthly Status Report...) Identify high level Risks (overruns, DLDs) and opportunities at portfolio level with mitigation actions. To lead (from planning and reporting point of view) in the preparation / consolidation and review of the various Project schedules and report updates (internal and external / Annual and Multiyear) with inputs from the members of the Project Team and provide “ad hoc” plans support as required. Provide support and resources to projects Propose support and Manage services on behalf of projects when required. Improve and learn from experience Gather and share lesson learned from projects Nigeria regarding project performance including project schedules benchmarks with Onetech. Share regular feedback with local contractors to better work together from one project to another.

QUALIFICATIONS / EXPERIENCE REQUIRED Minimum bachelor’s degree or equivalent in accounting and or similar background. Typically, 20 years of oil and gas industry professional experience of which at least 10 years in an equivalent position as a lead planning, reporting and risk engineer.
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency

2026-43182 - Turnaround Planning Engineer - Electrical & Instrumentation

Mon, 29 Jun 2026 22:15:33 Z

Contract type : Fixed-term-contract
Position description :
We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a : Turnaround Planning Engineer - Electrical & Instrumentation Turnaround Execution Implement the execution strategy for Turnaround scope, including detailed scheduling, resource optimization, and effective communication among all stakeholders and contractors to ensure timely completion of work. • Coordinate closely with all stakeholders to ensure smooth execution, including alignment on priorities, issue resolution, and recovery actions in case of delays. • Monitor and control Turnaround progress using schedules, performance indicators, and trend analysis to assess deviations and implement corrective measures. • Update and manage schedules to accommodate unforeseen or emergent scope during Turnaround, ensuring all changes are properly evaluated and approved. • Ensure readiness prior to execution by verifying availability of materials, manpower, tools, permits, and other prerequisites. • Support mechanical completion, punch list clearance, and pre-startup readiness verification to facilitate safe and efficient startup. • Facilitate effective communication across all teams for continuous progress tracking, issue resolution, and schedule recovery. • Coordinate the power outage caused by the isolation of the switchboard for shutdown maintenance on busbars. • Evaluate the temporary power supply requirements based on the identified temporary loads and develop the technical specifications required for ordering the same. • Review the temporary power connections to the temporary loads and work with the respective field group on securing the same. • Ensure the quality of short-term contractor manpower hired to support with the shutdown activities. • Monitor the record of attendance for contractor manpower and equipment for the sake of invoicing after the completion of the shutdown. • Raise emergency purchase enquiries for unforeseen requirements emerging during the execution of the shutdown. • Follow on the implementation of the lessons learned from previous shutdown for the sake of continuous improvement. Turnaround scope and plans Develop and define the Turnaround scope, including contract requirements, in line with agreed milestones, and ensure preparation of work packs, personnel mobilization plans, and execution strategies for shutdown and Turnaround windows. • Act as focal point for technical inputs related to tendering, technical evaluations, and contract presentations within the assigned area. • Establish, maintain, and report the master planning schedule across all phases of the Turnaround, including progress monitoring, reporting, and implementation of corrective actions, while controlling scope changes through a structured process. • Initiate and manage all required work orders and activities in SAP systems with realistic duration estimates, ensuring timely availability of resources, materials, and spare

Bachelor’s Degree in a relevant discipline (Instrumentation/Electrical/Electronics). 5–10 years of direct and relevant TAR planning/engineering experience. Proficiency in SAP and Primavera P6 required. Strong understanding of Stage-Gate governance, critical path management, and integrated TAR execution. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Offic
Location : Doha
Language / Level :
English : C-Professional working proficiency

2026-42119 - SAP Leader

Fri, 26 Jun 2026 14:33:57 Z

Contract type : International Contract
Position description :
MISSIONS : 1. CMIMS Strategy & Execution : Oversee CMIMS issues, deviations, and team personnel, serving as the primary contact for all CMIMS-related discussions. Manage asset registers, data templates, and define asset data management requirements. Plan development, ensuring adherence to delivery dates, and participate in guideline and strategy development. 2. Engineering & Quality Compliance : Produce engineering deliverables according to project contracts and propose solutions to enhance activity quality. Perform and review for quality compliance, manage Quality Assurance (QA), and report noncompliance or risks. Report directly to the O&M Package Maintenance Leader regarding compliance. 3. Team Management & Best Practices : Define and implement team practices, standards, and procedures; propose team improvements and integrate best practices. Conduct HSE toolbox talks and contribute to project digitization and intelligent marketing efforts. Contribute to Data Processing Hub (DPH) development. 4. Stakeholder Engagement : Organize client workshops and report to senior management. Stay informed about contracts, procedures and general engineering standards. CONTRACT TERMS & MOBILITY : Local employment contract within an international group entity or freelance contract, depending on profile Full remote during the preparation phase with missions in Cergy (France) and abroad at contract start for spot missions overseas Mobilization in Turkey as from March 2027 Site rotation: 8 weeks ON / 2 weeks OFF Expected final project outcome: Strong engineering performance (database population) by end of 2026 Successful execution of database loading and implementation of CMIMS from 2027 to 2033

Bachelor's degree or higher in Electrical, Mechanical, Instrumentation Engineering, or a related field English: B2 level mandatory Turkish nationality or speaking people is a strong plus Minimum 7 years of experience in developing and executing CMIMS/CMMS strategies. Proven track record in refining and/or petrochemicals is an advantage. General understanding of equipment, methods, and processes in Oil & Gas/Petrochemical environments. Knowledge in Maintenance & Inspection engineering, CMMS, Asset Management, and Data Management. Good Statistical Data preparation and Technical Reporting skills Possess supervision, leadership, team management, and problem-solving skills. Ability to work in a multi-cultural environment and under pressure. Effective communication skills for interacting with team members and other departments. Self-motivated with a flexible approach; good sense of initiative and anticipation. Working under pressure
Location : Adana
Language / Level :
English : D-Full professional proficiency

2026-43313 - Opercom Commissioning Process/Mechanical Advisor M/F

Thu, 25 Jun 2026 07:31:01 Z

Contract type : Temporary work contract
Position description :
o Provide guidance on process and mechanical commissioning strategy. o Review commissioning sequence of utilities, safety systems, hydrocarbon systems, process packages o Review procedures for process start-up, package commissioning, mechanical preparation o Validate technical content prepared by ITF writers o Validate alignment between start-up logic and commissioning execution o Ensure procedures follow OPERCOM commissioning principles

• Duration: 6 weeks, 5 days/week, 9h/day (including lunch) • Location: Fully Remote
Location : Remote
Language / Level :
English : D-Full professional proficiency

2026-43683 - Field Service Engineer

Wed, 24 Jun 2026 09:01:58 Z

Contract type : Freelance contract
Position description :
Manage, organize, and monitor projects involving rotating machinery, turbines, or auxiliary equipment while ensuring compliance with cost, quality, and schedule requirements. He supervises a team of foremen and/or mechanical fitters. MISSIONS : Take charge of the equipment : Perform /ensure/validate the equipment inventory (quantitative inventory with visual inspection) and associated handling operations Identify/ensure/validate parts and subassemblies and their proper storage Ensure/validate that all parts and subassemblies are available Disassemble and assess equipment Perform/ensure/validate dismantling operations, parts identification, and proper storage of parts and subassemblies Perform/ensure/validate appropriate cleaning of parts and subassemblies Perform/ensure/validate dimensional and geometrical inspections / functional clearances checks Identify/ensure/validate parts requiring repair or replacement Complete the inspection report and propose required repairs to the Project Manager/Site Lead Refurbish and reassemble equipment : Perform / ensure / validate dimensional and geometrical inspections of new or repaired parts Perform / ensure / validate functional clearance checks during reassembly Perform / ensure / validate fitting and assembly operations / basic piping and boilermaking activities / hot work activities (welding, thermal expansion fitting, etc.) Adjustment operations (on site) : Perform / ensure / validate adjustment operations (turbine internal alignment, machine alignment, casing weighing, etc.) Operations traceability : Complete / ensure / validate inspection sheets related to maintenance activities performed Participate in / draft / validate various reports and handover certificates (at minimum the observation section) and have them signed by the Client Propose solutions to the Project Manager / Site Lead Complete and validate the Project Quality Plan and/or work procedures Supervise activities Validate and sign the Job Safety Analysis / Prevention Plan (PDP) Sign the site opening report and send it to the Project Manager Ensure execution of assigned works in compliance with the schedule defined by the Project Manager Provide daily updates to the Project Manager regarding site progress and issue daily reports

Technical degree or equivalent qualification English fluent Strong technical knowledge of industrial maintenance for rotating equipment required Strong fitting / mechanical assembly skills required Proficiency in the use of measuring instruments Ability to read and interpret technical drawings Certifications / authorizations: overhead crane operation, forklift and lifting equipment certification Analytical skills, methodical approach, rigor, and initiative Ability to prioritize and manage workload effectively Ability to comply with production / site objectives Team spirit
Location : Moyen Orient
Language / Level :
French : E-Native or bilingual proficiency
Language / Level :
English : D-Full professional proficiency

2026-43830 - SURF Umbilical Project Engineer *(M/F) M/F

Tue, 23 Jun 2026 14:23:50 Z

Contract type : Temporary work contract
Position description :
SPIE Services Nigeria Limited is currently looking for SURF Umbilical Project Engineer to join its work force in Nigeria. JOB PURPOSE Following FID and Contract Award, the SURF Umbilical Project Engineer is responsible for the safe and timely delivery of the umbilical work scope in compliance with project technical requirements, contractual obligations, quality standards, and approved schedule. The job holder ensures the coordination of engineering, qualification, procurement, manufacturing, fabrication, installation, and pre-commissioning activities, while maintaining technical assurance, effective interface management, and appropriate oversight of contractor performance, quality, and technical risks, in order to deliver a fit-for-purpose umbilical system and support successful project execution. ACTIVITIES 1. Pre-Award Technical and Contract Support Lead and coordinate technical clarifications and support contractual negotiations with tenderers, with input from corporate specialists, to support timely placement of the purchase order and compliance with local approval requirements. Monitor and manage all tenderers’ technical queries, qualifications, and COMPANY responses to ensure complete and timely closure. Ensure the technical design dossier and contract scope of work are fully understood, technically robust, and executable by the selected bidder. Ensure agreed interface requirements related to the umbilical scope are identified and properly addressed during the tendering and award process. Support reporting, technical meetings, bidder interactions, and follow-up of technical actions, including close-out of key review items where applicable. Coordinate fabrication site visits and audits as required and prepare the technical evaluation report for the recommended bidder with appropriate justification for internal and local authority review. 2. Post-Award Umbilical Delivery and Technical Assurance Ensure the umbilical Work scope is delivered in compliance with project technical requirements, contractual obligations, quality standards, and approved schedule. Monitor and manage engineering development, including technical changes, deviations, and derogations, to maintain compliance and fitness for purpose. Review engineering, qualification, and procurement documentation and ensure the required level of priority and technical attention is applied throughout execution. Ensure engineering, qualification, and procurement activities are performed in line with contract requirements, project specifications, and company standards within the project schedule. Ensure engineering maturity is sufficient before qualification, procurement, manufacturing, and fabrication activities commence, and that design outcomes are carried through into installation and pre-commissioning. Support manufacturing, fabrication, installation, and pre-commissioning activities and lead resolution of technical issues when required.

3. Interface and Contractor Coordination Evaluate and coordinate responses to contractor technical queries and correspondence in a timely and consistent manner. Coordinate and consolidate technical feedback from the project team, corporate specialists, and relevant stakeholders to support decision-making and execution. Ensure interface requirements are identified, tracked, and resolved in coordination with the Package Interface Engineer and other interfacing parties. Provide day-to-day liaison and coordination across the package technical team throughout all execution phases. 4. Quality, Fabrication, and Execution Support Coordinate with the QA/QC team to ensure appropriate supervision of umbilical fabrication activities at the contractor’s fabrication site. Identify schedule-critical and quality-critical activities and ensure adequate QA/QC coverage is in place for critical equipment and milestones. Ensure inspection and test plans for critical manufacturing and fabrication activities are reviewed in a timely manner and receive the appropriate level of attention from all relevant parties. 5. Change, Commercial, and Compliance Support Consolidate, assess, and document technical, schedule, and commercial changes in accordance with company change management processes, and advise the Package Manager on related impacts. Provide contractual and commercial support to the Package Manager, including review of contractor positions, estimates, SMRs, variations, and claims documentation. Monitor compliance with Nigerian Content requirements applicable to the SURF package, including reporting obligations, stakeholder coordination, and consolidation of performance data. QUALIFICATIONS/EXPERIENCE REQUIRED SURF / Umbilical Engineering Expertise Project Engineering & EPC Delivery Experience Interface Management Contractor / Vendor Coordination and Technical Negotiation
Location : Port Harcourt, Nigeria
Language / Level :
English : C-Professional working proficiency